Trophy Ridge Bow Sight Batteries: Which Type, When to Replace and How
Trophy Ridge bow sight batteries: learn which battery size fits, how to tell when it's dying, and how to replace it correctly so your pins stay bright.
Updated November 2026
Trophy Ridge bow sights with lighted pins usually run on a small coin-style lithium cell, most often a CR2032 or a similar button battery, though the exact size depends on the model. Check the battery compartment or the manual before buying, then replace the cell when the pin dims or disappears. Always confirm the size for your specific sight.
Why Trophy Ridge Bow Sight Batteries Matter
Lighted pins are only useful when they are bright enough to see in low light. A weak battery can make a pin look dim at dawn or dusk, which is exactly when you need it most. Many archers first notice a problem when one pin fades while the others still glow, and that uneven brightness can throw off your aim if you don’t catch it.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
Factors That Affect Battery Size and Life
Three things determine what you need and how long it lasts:
- Sight model and light housing. Different Trophy Ridge sights use different battery sizes, so a battery that fits one model may not fit another. Look for the size printed on the housing or listed in the owner’s manual.
- How often the light stays on. Pins that are left switched on between sessions drain the cell faster. Turning the light off when you leave the bow in a case or on a stand helps.
- Storage and temperature. Cold weather reduces the output of lithium cells. Owners often report that pins look dimmer in winter even with a fresh battery, so a brief warm-up before shooting can help you judge brightness accurately.
How to Replace the Battery Safely
Replacing the cell is a quick job, but a few precautions protect the sight and your eyesight:
- Turn the light off and let the sight cool if it has been on.
- Open the battery cap or compartment with a small screwdriver or by hand, depending on the design. Do not force it.
- Note the polarity (the + side) before removing the old cell.
- Insert the new battery with the + side facing the direction marked in the housing.
- Switch the light on and check that every pin lights at the same brightness.
- Store the spare battery in a cool, dry place away from metal objects that could short it.
Button batteries can be dangerous if swallowed. Keep spares away from children and pets, and if you suspect ingestion, seek medical care immediately.
Tips for Longer Battery Life
- Switch the pin light off when you finish shooting, not just when you pack up.
- Keep a spare cell in your kit so a dying battery doesn’t end your session.
- Check brightness at the start of each season and replace the cell before it fades completely.
- Re-check your sight pin settings after a battery change if the housing was disturbed.
FAQ
What size battery does a Trophy Ridge bow sight use?
Most lighted Trophy Ridge sights use a small coin-style lithium button cell, commonly a CR2032, but sizes vary by model. Check the housing or manual for the exact type before buying.
How do I know when my bow sight battery is dying?
The most common sign is a pin that looks dimmer than the others or flickers in and out. If all pins fade together, replace the cell.
Can I use a rechargeable battery instead?
Only if the manufacturer specifies it for your sight. Rechargeable cells often have a different voltage, which can change pin brightness or fail to fit. Consult the owner’s manual or the manufacturer before switching.
Related reading
- Trophy Ridge Bow Sight Battery Size: Which Battery to Use (2026)
- Trophy Ridge Drive Slider Bow Sight: What It Is and How to Use It
- Trophy Ridge Bow Sight Light: How to Choose and Use One Right
- Truglo Bow Sight Light Battery Replacement: Step-by-Step Guide
- TruGlo Bow Sight Battery Replacement: A Step-by-Step Guide
Ready to choose one?
