We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Fiber Optic Bow Sight Replacement: A Step-by-Step Guide for Archers

Learn how to handle fiber optic bow sight replacement, from checking your current sight to mounting, aligning and sighting in the new fiber pins.

Updated November 2026

Fiber optic bow sight replacement is a straightforward job once you know what to check before you buy and how to mount the new sight correctly. This guide walks you through identifying the right replacement, removing the old unit, mounting the new one and sighting it in so your pins line up with your arrow impact. Most of the work is mechanical, but the alignment step is where accuracy is won or lost.

Before You Buy a Replacement Fiber Optic Sight

Start by recording the details of your current sight. Mismatched mounts and pin spacing are the most common reasons a replacement fails to fit your bow.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

  • Measure the mounting hole pattern on your riser, usually a dovetail or a set of tapped holes spaced for a standard bracket.
  • Note the sight housing style: single pin, multi-pin, slider or a fixed-pin design.
  • Check your draw length and bow speed, since these affect the pin yardage range you need.
  • Confirm whether you want to keep the same fiber optic pin size or switch to a different diameter.

If you are unsure which type fits your bow, the manufacturer’s site or your local pro shop can confirm compatibility. For background on how these sights are built, see Fiber Optic Bow Sight Pins: How to Choose and Set Them Up (Step-by-Step).

Removing the Old Sight and Mounting the New One

Work on a clean surface with the bow unstrung or with the string safely secured. Keep track of every screw, washer and shim, since small parts are easy to lose. For another angle, check out Recurve Bow Sight Pins: A Step-by-Step Setup Guide for Beginners.

  1. Remove the sight’s mounting bolts with the correct Allen or hex key. Loosen them gradually to avoid stripping threads.
  2. Detach the sight bracket from the riser and set aside the old hardware.
  3. Thread the new mounting bracket into place and snug the bolts by hand first.
  4. Tighten to the torque value listed in the sight’s manual. If no value is given, tighten until firm and do not overdrive the screws.
  5. Check that the sight body sits square to the riser and moves freely on its adjustment points.

Fiber optic sights often include a light-gathering housing or a battery-powered illumination unit. If your replacement uses one, follow the separate steps in TruGlo Bow Sight Battery Replacement: A Step-by-Step Guide when setting up the power source.

Aligning and Sighting In the New Fiber Optic Pins

Mounting is only half the job. The pins must be set to your shooting form and arrow flight, and that takes a deliberate sight-in session.

Setting the Basic Alignment

Begin with the sight’s left-right and up-down adjustments centered. Shoot at a target at a known distance, such as 20 yards, and group several arrows. Adjust the sight until your group centers on the target face. Use small movements, then shoot again to confirm.

Setting Pin Yardages

Once the first pin hits center at your primary distance, move back in measured steps, commonly 10 yards at a time, and set each pin to its own distance. Keep your anchor, release and form identical from shot to shot so the pins reflect your real shooting.

Step What to check Typical sign of a problem
Mounting Bracket square and bolts snug Sight wobbles or drifts
Fiber alignment Pins visible and centered in the housing Dim or split pin image
Sight-in Group centers at first distance Arrows consistently miss one direction
Pin yardages Each pin matches its distance Pin groups drift as distance changes

Common Mistakes to Avoid

  • Overtightening mounting bolts, which can crack a riser or strip threads.
  • Sighting in with inconsistent form, which makes every pin setting unreliable.
  • Skipping a recheck after the first few shooting sessions, since bolts can loosen.
  • Ignoring fiber cleanliness; dust or fingerprints on the fiber can dull the pin.
  • Trying to set all pin yardages in one session instead of building them up over time.

If your arrows keep landing low after the replacement, the cause is often a setup issue rather than the sight itself. See Why Does My Bow Shooting Low Move Sight Pin Point Down? Causes and Fixes for troubleshooting ideas.

  • Hex key set: A full metric and standard set lets you remove and tighten sight hardware without rounding bolt heads. View on Amazon
  • Torque-limiting driver: Helps you hit the specified bolt tension without guessing. View on Amazon
  • Bow vise or stand: Holds the riser steady while you mount and adjust the sight. View on Amazon

FAQ

Can I replace a fiber optic sight with a different brand?

Yes, as long as the new sight’s mounting pattern and housing type match your riser. Check the bracket specifications before buying, since adapters are not always available.

How often should I check the sight after replacement?

Check bolts and pin alignment after your first few shooting sessions, then at regular intervals. Loosened hardware is the most common cause of drift.

Do I need to re-sight every time I change arrows?

A change in arrow weight, length or point weight usually shifts impact, so a quick recheck at your main distance is wise. Full pin yardage tuning is only needed when your setup changes substantially.

Conclusion

A successful fiber optic bow sight replacement depends on matching the mount, mounting it carefully and sighting in with consistent form. Take your time with each step and keep notes on your settings. If you are uncertain about bow work or your riser’s condition, a qualified archery pro shop can help you finish the job safely.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.