We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Trophy Ridge Bow Sight Battery Size: Which Battery to Use (2026)

Find the correct trophy ridge bow sight battery size, how to check it, and what to do when your sight pins or light stop working. Quick, practical steps.

Updated November 2026

The trophy ridge bow sight battery size is usually a small coin-style cell, and the exact size depends on the model and whether the sight uses an illuminated pin or a light. This guide shows you how to confirm the right battery for your sight, how to swap it without damaging the housing, and how to keep the battery from failing at the worst possible moment. You will need only a small screwdriver or coin, a fresh battery, and a few minutes.

Confirm the Battery Size Before You Buy

Trophy Ridge sights are not all wired the same way. Some models use a lithium coin cell in a sealed compartment, while others use a different cell for the light. Start by checking the sight’s manual or the product page on the manufacturer’s site, which should list the battery type. If you no longer have the paperwork, look at the battery itself once it is out of the sight. The number printed on the cell (for example, a designation starting with “CR” followed by four digits) tells you the size.

Write that number down before you shop. Matching the designation exactly is more important than matching the brand, since most coin cells of the same size are interchangeable.

How to Replace the Battery Safely

Work on the sight in a clean, well-lit spot, and keep small parts from rolling away. Battery compartments on sights are small, so take your time.

  1. Remove the sight from the bow or set the bow in a stand so the sight is stable.
  2. Locate the battery cap or compartment. Most are on the sight housing or the light module.
  3. Use a small flat-head screwdriver or a coin to turn the cap counterclockwise until it releases.
  4. Note the orientation of the old battery, with the positive (+) side facing up or down, before removing it.
  5. Insert the new battery with the same orientation. Press the cap back on and turn it clockwise until snug, without forcing it.
  6. Test the illumination or pin light before reattaching the sight to the bow.

Do not overtighten the cap. Stripped threads on a small housing are a common cause of water entry, and a cap that will not seal properly can let moisture reach the contacts.

Checking Whether the Battery Is the Problem

A dim or dead light does not always mean the battery is empty. Before you assume the worst, confirm the battery is seated correctly and the contacts are clean. Look for corrosion or residue on the contacts and the battery surface. If the light still does not come on after a fresh cell, the fault may be in the switch, the wiring, or the light module itself. At that point, contact the manufacturer or a qualified archery shop for service.

When to Replace on a Schedule

Many archers replace the battery at the start of each season rather than waiting for it to fail. Coin cells lose charge slowly even when the light is off, and a battery that is weak can flicker or dim in cold weather. Keeping a spare in your bow case costs little and saves a lot of frustration on a hunt or during a tournament.

Common Mistakes

  • Buying a battery by brand alone instead of matching the size designation printed on the cell.
  • Installing the battery backward, which can prevent the light from working or damage the circuit.
  • Overtightening the battery cap, which can strip threads and compromise the seal.
  • Leaving the sight on for long periods while idle, which drains the cell faster.
  • Ignoring corrosion on the contacts and assuming a new battery will fix a dead light.

A small set of tools and spare parts makes battery swaps quick and reliable in the field.

  • Precision screwdriver set: Small flat-head bits fit battery caps without marring the housing. View on Amazon
  • Lithium coin cell batteries: Keeping a spare of the matching designation avoids a mid-season failure. View on Amazon
  • Contact cleaning swabs: Removing light residue from battery contacts helps restore a solid connection. View on Amazon

For related setup questions, see Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide for electronic sights, and Bow Sights with Rangefinder: 5 Best Picks Compared (2026) if you are comparing models.

FAQ

What battery size does a Trophy Ridge bow sight use?

It depends on the model, so check the sight’s manual or the battery itself for the printed designation. Coin-style lithium cells are the most common type for illuminated sight pins and lights.

Can I use any battery of the same size?

Batteries with the same size designation are generally interchangeable, though brand quality can affect how long the light lasts. Stick with a reputable brand and avoid mixing old and new cells.

Why does my sight light stop working after I change the battery?

Check that the battery is oriented correctly and the contacts are clean. If the light still fails, the problem may be in the switch or wiring, so contact the manufacturer or a qualified repair service.

Conclusion

Finding the right trophy ridge bow sight battery size comes down to reading the designation on the cell or in the manual. A careful, unhurried swap with the correct orientation keeps the housing sealed and the light working. Keep a spare in your case, and replace the battery before each season to avoid trouble when it counts.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.