We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Trophy Ridge Drive Slider Bow Sight: What It Is and How to Use It

Learn what a Trophy Ridge drive slider bow sight is, how its slider and pins work, and how to set and adjust it for accurate shots.

Updated November 2026

A Trophy Ridge drive slider bow sight is a sight that moves its pin housing along a rail, or slider, so you can adjust the sight window position relative to your bow. Most owners use the slider to center the sight on the bow’s riser and to bring the pins into alignment with the arrow path. The sight itself is set by adjusting the slider, then the pins, then tuning for your draw length and arrow speed.

Why the Slider Matters for Your Trophy Ridge Drive Slider Bow Sight

A compound bow’s sight has to line up with the arrow, and the arrow’s path depends on how the rest, cams and grip sit on the bow. The slider lets you shift the sight left or right and up or down without remounting it. That matters because a sight that is only a few millimeters off can throw groups well off target at 20 yards and beyond.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Manufacturers typically describe the slider as a fine-adjustment system rather than a permanent setting. If you change the arrow rest, nock height or draw length, you will usually need to revisit the slider position.

Factors That Affect Setup

  • Arrow rest position: Set the rest first. The sight pins need to be aligned with the arrow’s flight path, so a rest that moves changes the sight picture.
  • Draw length: Your anchor point and draw length change how the bow sits in your hand, which affects windage and elevation.
  • Arrow speed and weight: Heavier or faster arrows drop differently. Pin spacing should match your actual shot data, not generic charts.
  • Peep and string alignment: A peep set off-center makes the sight appear to move. Check this before you touch the slider.

How to Set Up and Adjust the Slider

  1. Install the sight on the mounting bracket and tighten the bolts only until the sight is snug. You will need to move it.
  2. Set your draw length and anchor point, then check that the peep sits square in your view.
  3. Shoot a few arrows at 10 yards. Note where they land relative to the center of the target.
  4. Loosen the slider lock and move the sight in small increments, about 1/16 inch at a time, until the group centers left to right.
  5. Adjust the pins for elevation at each distance. Shoot groups at 20, 30 and 40 yards and tighten the bolts once each pin is set.
  6. Recheck the setup after any change to the rest, nock height or draw length.

What we’d use

If you want a slider-style sight with a similar layout, a Trophy Ridge-compatible replacement pin set is a practical choice for shooters who want to swap pin sizes without buying a new sight. View on Amazon

For shooters who prefer a stable, rail-mounted sight with fine windage control, a slider-style sight from the same product family is worth a look. View on Amazon

FAQ

Can I use a Trophy Ridge drive slider bow sight on any compound bow?

Check the mounting pattern and bracket type against your bow’s riser. Most sights in this category fit standard bracket holes, but confirm the fit with the manufacturer before buying.

How often should I recheck the slider setting?

Recheck after any change to your draw length, rest, nock height or arrow setup, and after a few hundred shots if the sight has been bumped or vibrated loose.

Do I need a bow press to set the slider?

Not always, but a bow press makes it easier to make safe adjustments and to check cam timing. If you are unsure, consult a qualified archery technician or pro shop before making major changes.

Related reading: Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide covers how a rangefinder sight is calibrated, and How to Adjust Arrow Rest on Compound Bow: A Step-by-Step Guide explains the rest adjustments you should make before fine-tuning the sight.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.