We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Ultraview UV Slider Bow Sight: Setup, Sight-In and Tips for Beginners

Learn how to mount, sight in and tune an ultraview uv slider bow sight, with clear steps, common mistakes to avoid and tips for new archers.

Updated November 2026

An ultraview uv slider bow sight lets you adjust your aim point along a sliding track rather than changing pin positions, which makes fine tuning simpler for new archers. This guide walks through mounting the sight, setting your initial pin positions, and tuning for accurate groups at distance. Follow the steps in order and you should have a sight that is repeatable and easy to adjust.

Before You Start: Tools and Checklist

Gather everything before you open the box so you are not stopping halfway through a setup. Most sight-in work goes faster with a stable shooting bench and a dependable target.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

  • Allen keys or hex wrenches matching the mounting hardware
  • A bow press or a stable rest for setup work
  • Target paper or a 3-spot target at 20 yards
  • A square or bubble level to keep the sight plumb
  • A notebook to record pin positions and arrow group locations

Step 1: Mount the Sight Correctly

Attach the sight bracket to the riser using the mounting holes your bow provides. Keep the bracket firm but do not overtighten, since stripped threads are a common and frustrating problem. Check that the slider track sits level and that the sight is centered over the arrow path when you draw.

Step 2: Set Initial Pin Positions and Sight In

Start with the slider at its midpoint and shoot at a 20-yard target. Adjust the slider so your arrows group where you are aiming, then move the pins to match your target distances. Work through each distance in order, shooting three to five arrows per setting before making adjustments.

Recording Your Settings

Write down the slider position and pin height for each distance. Owners often find that marking these on a tape or card on the bow saves time on later sessions.

Step 3: Fine-Tune for Groups and Consistency

Once the sight is roughly set, focus on tightening your groups rather than chasing single arrows. If arrows consistently land high or low, make small slider changes of a quarter turn or less. Large changes often overshoot and waste time.

Symptom Likely Cause Adjustment
Group high at all distances Slider too high Lower slider slightly
Group left or right Sight not centered Adjust windage on the bracket
Wide, scattered groups Inconsistent form or grip Check form before changing sight

Common Mistakes to Avoid

  • Adjusting the sight before confirming your form is consistent.
  • Making large slider changes instead of small, incremental ones.
  • Skipping the level check, which causes skewed pin alignment.
  • Failing to recheck settings after changing arrows, release or draw length.
  • Bow press: A stable press helps you check sight settings without fatigue. View on Amazon
  • Bubble level for bows: Keeps the sight plumb during mounting and tuning. View on Amazon

For more background, see What Is an Ultraview Slider Bow Sight and How Do You Set It Up? and Why Does My Bow Shooting Low Move Sight Pin Point Down? Causes and Fixes.

FAQ

How far should I sight in an ultraview uv slider bow sight?

Begin at 20 yards, then set pins for the distances you actually shoot in practice or hunting. Confirm each setting at that distance before moving on.

Why do my arrows still group poorly after tuning?

Poor grouping is often caused by inconsistent form, grip or release rather than the sight. Address form first, then recheck the sight.

Should I consult a professional for setup?

If the bracket feels loose, threads are damaged, or the bow shows signs of stress, consult a qualified archery pro or bow shop before continuing.

Conclusion

A properly mounted ultraview uv slider bow sight, tuned with small slider changes and recorded settings, gives you repeatable accuracy. Work through the steps in order and address form before making mechanical adjustments. Consistent practice will do more for your scores than any single setting.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.