We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

What Is an Ultraview Slider Bow Sight and How Do You Set It Up?

Learn what an ultraview slider bow sight is, how its slider and pins work, and the steps to set it up and sight in accurately as a beginner.

Updated November 2026

An ultraview slider bow sight is a sight with a frame that lets you slide individual pins along a track to match your distance, rather than relying on a single fixed pin or a dial. The sight is mounted to the riser, and the slider lets you move the pins up or down for each yardage you practice. Setting it up correctly takes patience, but the process is straightforward once you understand the parts.

Why the Slider Design Matters

A slider sight gives you a clear, repeatable way to set your aim for different distances. Instead of holding over a pin for each yard, you place the correct pin at your chosen distance and aim at the target center. Many new archers find this easier to read than a crowded multi-pin array because each pin can be adjusted independently.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

The trade-off is that slider sights have more moving parts. Loose hardware, a bent track, or a slider that has shifted will throw off your groups, so checking the sight before each session is worth the few minutes it takes. Owners often report that small adjustments to the mounting screws cause larger changes at distance than they expect.

Setting Up and Sighting In Your Sight

Start with a stable setup. Mount the sight securely, confirm that the sight housing is level with the arrow shelf, and make sure the pins move freely without binding. Then work through the steps below.

  1. Set the bow to your draw length and tune the arrow so it flies true. A sight cannot correct poor arrow flight.
  2. Place a target at a short, known distance, such as 10 yards, and shoot a group of three to five arrows.
  3. Adjust the top pin or the slider position so the arrows group where your aim point is. Move the adjustment in small increments.
  4. Repeat at the next distance, then mark each pin position with a label or tape so you can find it again.
  5. Check the sight after every session. Tighten the mounting screws and confirm the pins have not moved.

Common Problems and Fixes

  • Groups drift left or right: Recheck the sight’s lateral alignment and confirm the bow is held upright at full draw.
  • Arrows hit high or low at every distance: Adjust the sight height in small steps, then re-sight from a short distance.
  • A pin keeps slipping: Inspect the slider for wear or debris, and tighten the locking screw according to the manufacturer’s torque guidance.
  • Accuracy changes with your anchor: Use the same anchor point, string contact, and release every time.

If you are unsure whether a fitting or repair is safe to do yourself, consult a qualified archery pro shop before changing mounts or string-related components.

What We’d Use

A sight for this type of setup should match your bow’s riser and mounting holes. Check the sight’s compatibility before buying, and look for a sight with a stable, lockable slider.

  • Trophy Ridge Drive Slider Bow Sight: a slider-style sight that many beginners look at when comparing pin layouts. View on Amazon
  • Xero A1i Pro Bow Sight: a sight option for archers who want a single adjustable pin setup. View on Amazon

For background on how the slider works in practice, see Trophy Ridge Drive Slider Bow Sight: What It Is and How to Use It. If you are weighing pin count, Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners? covers the trade-offs in more detail.

FAQ

Is an ultraview slider bow sight good for beginners?

It can be, because each pin is set independently and marked for a specific distance. Beginners should still sight in carefully and keep the sight tight.

How often should I re-sight my slider sight?

Check the pin positions at the start of each session, and re-sight whenever you change arrows, string, or draw length, or if the sight has been bumped.

Can I adjust the slider without a bow press?

Most slider adjustments are made with the bow strung at a normal draw, using the adjustment screws and a steady target. Avoid forcing the slider, and follow the manufacturer’s instructions for your model.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.