We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Mathews MX2 Arrow Rest: Setup, Tuning and Buying Tips for Beginners

Learn how the Mathews MX2 arrow rest works, how to set it up and tune it for clean arrow flight, and what to check before you buy one.

Updated November 2026

The Mathews MX2 arrow rest is a drop-away style rest that many Mathews bow owners use to keep arrows positioned consistently before the shot. This guide explains what the MX2 does, how to set it up on a Mathews bow, how to tune it for clean arrow flight, and what to check before buying one. Most archers can complete the basic setup in under an hour with a few common tools.

How the MX2 Arrow Rest Works

The MX2 holds the arrow on a rest arm while you draw, then drops away as the arrow leaves the bow. Because the arrow is not in contact with the rest during release, the rest does not disturb arrow flight the way a fixed contact point can. Manufacturers describe the design as a way to reduce contact and improve consistency, so tuning matters more than the rest itself.

Shopping for one? See our guide: QAD Ultrarest Integrate MX2 Arrow Rest Review: Key Features Explained.

Setting Up the MX2 on Your Mathews Bow

Before you mount the rest, confirm your bow is set to your draw length and that your arrow is cut to the correct length with a proper point and nock. Work through these steps in order:

  1. Clean the riser mounting area and confirm the rest mounts on the correct threaded holes for your bow model.
  2. Attach the rest loosely so you can adjust height and position.
  3. Set the rest height so the arrow sits level with the shelf when nocked, with the arrow shaft centered on the rest arm.
  4. Set the rest arm so the arrow sits square to the bow with the nock point at the correct height on the string.
  5. Tighten all fasteners and check that the rest moves smoothly through its drop-away cycle.

Tuning the MX2 for Clean Arrow Flight

Tuning is where most of the accuracy comes from. Start with paper tuning at about 3 to 4 feet from a sheet of paper stretched on a frame. Shoot through the paper and look at the tear. A centered tear with fletching clearing the edges suggests the rest and nock point are close. Adjust the rest left or right in small increments until the tear looks consistent.

After paper tuning, shoot a group at 20 yards. If arrows drift in a pattern, check the rest arm timing and confirm the arrow is not catching on the rest during release. Recheck nock height and brace height after each change, since small adjustments affect the whole setup.

Checking Drop-Away Timing

Watch the rest closely during the shot. The arm should begin to drop only after the arrow has left the string. If it drops early or hangs, look at the spring tension and the rest’s cam or lever clearance. Owners often report that a loose mount causes erratic timing, so check fasteners after the first few sessions.

Buying Tips Before You Choose an MX2

Confirm the rest fits your riser and that you have the correct mounting hardware for your model year. Check that your arrow diameter and shaft type suit the rest’s arm and shelf. If you shoot a Mathews bow with a different sight or stabilizer layout, measure clearance before you buy so the rest does not interfere with your accessories.

  • Paper tuning frame: A stand-up frame makes it easy to shoot through paper at a consistent distance. View on Amazon
  • Bow square and nock height tool: These help you measure nock point and brace height accurately during setup. View on Amazon
  • Arrow rest wrench set: A small hex and Allen set keeps the rest fasteners tight without stripping them. View on Amazon

Common Mistakes

  • Skipping paper tuning and relying only on visual alignment.
  • Overtightening the mounting screws, which can strip threads in the riser.
  • Changing the nock point without rechecking the rest height.
  • Ignoring a rest that drops late or sticks, since timing problems hurt accuracy.
  • Mixing arrow shaft sizes without adjusting the rest arm to match.

For a broader look at how this rest compares with others, see Mathews Integrate MX2 Arrow Rest: Setup, Tuning and Buying Tips and Qad Mx2 Arrow Rest Review: Key Features Explained. If you are weighing drop-away designs more generally, Drop Away Arrow Rest Mathews: Setup, Tuning and Buying Guide covers the same principles in more detail.

FAQ

Do I need a drop-away rest to shoot a Mathews bow?

No. Many archers shoot fixed or other rest styles successfully. A drop-away design is a choice based on how you want the arrow to leave the bow, not a requirement.

How often should I recheck the MX2 setup?

Check fasteners and timing after the first few sessions, then every few weeks or after any bow adjustment. Recheck paper tuning whenever you change arrows or nock point.

Can I install the MX2 myself?

Most archers can mount a rest with basic hand tools and the manufacturer’s instructions. If you are unsure about threads or timing, a pro shop can check the work.

Conclusion

The Mathews MX2 arrow rest works best when you mount it carefully, tune it with paper and group shooting, and check timing regularly. Take your time with the first setup and small adjustments will become much easier. Consistent setup habits matter more than any single component.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.