We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Mathews Integrate MX2 Arrow Rest: Setup, Tuning and Buying Tips

Learn how the Mathews Integrate MX2 arrow rest works, how to set it up and tune it for clean arrow flight, and what to check before you buy.

Updated November 2026

The Mathews Integrate MX2 arrow rest is a drop-away style rest built around a simple idea: hold the arrow firmly at full draw, then get out of the way at release. This guide explains how the MX2 is designed, how to mount and set it up on a Mathews bow, how to tune it for clean arrow flight, and what to look for if you are deciding whether it fits your shooting. Read the manufacturer’s instructions that came with your rest first, because exact adjustment ranges and torque values can vary by model year and bow.

What the Mathews Integrate MX2 Arrow Rest Does

An arrow rest supports the arrow between the time you nock it and the moment the string releases it. Most rests on the market fall into one of three groups: fixed rests that stay in contact with the arrow through the shot, drop-away rests that move out of the arrow’s path at release, and containment rests that hold the arrow in a cup or capture system. The MX2 belongs to the drop-away family. Its arm holds the arrow at rest while you draw, then retracts so the fletching and shaft can pass cleanly.

Shopping for one? See our guide: QAD Ultrarest Integrate MX2 Arrow Rest Review: Key Features Explained.

Drop-away designs are popular because they reduce contact between the rest and the arrow during the shot. Less contact generally means less chance of the arrow being pushed off line by the rest. Owners often report that drop-aways feel quieter and that they make it easier to achieve a consistent, straight launch once the rest is properly tuned. That said, a drop-away is only as good as its setup. A poorly timed or misaligned rest will cause the same problems a cheap fixed rest would.

Before You Start: Tools and Checklist

Gather everything before you open the box or start turning screws. Setting up a rest on a bench with the right tools is much faster than improvising at the range.

  • Hex keys in the sizes listed in the rest’s instructions (commonly metric sizes for most modern bows)
  • A torque driver or a small torque-capable wrench, so you do not overtighten mounting screws
  • A bow square, to check the arrow’s position relative to the riser
  • Your bow’s string and cable servings, inspected for wear
  • A set of arrows matched to your draw length, point weight and bow weight
  • A paper tuning kit or a tuning target, and a bow press or string-level tool if you plan to do detailed tuning
  • A notebook to record each adjustment and its result

Also check your bow’s manufacturer guidance on rest mounting holes. Some Mathews models use different hole patterns depending on the riser and sight setup, so confirm the mounting location before you commit to a height.

Step-by-Step Installation of the MX2

Step 1: Mount the Rest Bracket

Attach the rest’s mounting bracket to the riser using the screws supplied with the rest. Snug the screws first, then bring them to the torque specification listed in the instructions. Overtightening can strip threads or distort the bracket, and undertightening can let the rest drift during the shot. Recheck the torque after your first few sessions.

Step 2: Set the Rest Height

Start with the arrow centered vertically on the nock point, then adjust the rest so the arrow sits level when nocked. A useful starting reference is to have the arrow shaft parallel to the cam or limb system as seen from the side. Most archers set the height so the arrow passes straight through the rest’s cradle without touching the top or bottom surfaces. Measure with a bow square where possible.

Step 3: Set the Horizontal Position

Move the rest left or right so the arrow point is centered on the riser when viewed from behind the bow. This position is measured from the riser’s centerline to the arrow shaft. Many archers begin with the arrow centered on the riser and fine-tune from there. Write down your starting measurement so you can return to it if you change arrows or make major adjustments.

Step 4: Set the Drop-Away Timing

The timing controls when the arm retracts. Set it so the rest begins to drop as the string leaves the nock, not before. A rest that drops too early can cause the arrow to lose support and wobble, while one that drops too late can make contact with the fletching. Test by drawing and releasing slowly, watching the arm’s movement. Adjust in small increments and retest after each change.

Step 5: Check Contact Pressure

Set the rest so it supports the arrow lightly. Too much pressure creates friction at release, and too little lets the arrow sag or shift. A common check is to draw the bow and hold it, then see if the arrow stays in place without the rest pushing it sideways. Adjust the rest’s tension settings according to the manufacturer’s range.

Tuning the MX2 for Clean Arrow Flight

Once the rest is mounted and roughly adjusted, tuning refines the relationship between the arrow, the rest and the bow. The goal is a straight arrow flight with a clean paper tear, or a group that shows no consistent left-right or high-low bias at distance.

Paper Tuning

Shoot an arrow through a sheet of paper stretched on a frame, from about three feet away. Look at the tear. A center tear with the fletching appearing cleanly through the hole indicates good alignment. If the tear shows the arrow shaft hitting high, low, left or right of the center, adjust the rest in that direction in small steps. Recheck after each adjustment.

Bare Shaft Tuning

Shoot a bare shaft, which has no fletching, alongside a fletched arrow at the same distance. If the bare shaft and fletched arrow land in the same spot, your arrow is flying straight. If the bare shaft lands differently, the arrow is not flying in line with the bow, and you should revisit the rest position and timing.

Walk-Back Tuning

For more detailed tuning, shoot from a short distance and then walk back in steps while watching arrow flight. Some archers prefer this method because it isolates problems that only appear at longer range.

Common Mistakes to Avoid

  • Skipping torque checks. Loose mounting screws can change your rest position between sessions.
  • Setting timing too early. A drop-away that retracts before release causes the arrow to wobble.
  • Over-adjusting. Make one small change at a time, then test. Multiple changes make it impossible to know what helped.
  • Ignoring arrow spine. A rest cannot fix an arrow that is badly mismatched for your bow. Confirm spine and point weight before tuning the rest.
  • Forgetting to record settings. A notebook with your starting and final measurements saves time later.

Buying Tips for the Mathews Integrate MX2

Before buying, confirm that the MX2 fits your specific Mathews bow model and riser. Check the mounting pattern and whether any adapter is needed. Think about your shooting style as well. If you shoot fast, want minimal contact and plan to tune carefully, a drop-away like the MX2 suits that approach. If you prefer simplicity or shoot a traditional-style setup, a fixed rest may be a better match. Read reviews from archers with similar bows and draw lengths, and treat owner reports as one input rather than a final verdict.

These items support a clean installation and tuning process with the MX2.

  • Torque wrench set for archery: Helps you tighten rest and sight screws to specification without stripping threads. View on Amazon
  • Bow square: Lets you check arrow position and rest alignment against the riser accurately. View on Amazon
  • Paper tuning kit: Provides a frame and paper for quick visual feedback on arrow flight. View on Amazon
  • Bare shaft arrows: Useful for comparing flight against fletched arrows during tuning. View on Amazon

FAQ

Is the Mathews Integrate MX2 a drop-away rest?

Yes. It holds the arrow while you draw and retracts out of the arrow’s path at release, which is the defining feature of a drop-away design.

How do I know if my MX2 timing is correct?

The arm should begin retracting as the string leaves the nock, not before. Watch the arm during slow draws and releases, then confirm with paper tuning and bare shaft comparisons.

What torque should I use on the mounting screws?

Use the torque value listed in your rest’s instruction sheet or the manufacturer’s documentation. Values can vary, so do not rely on a general figure.

Can I install the MX2 on a non-Mathews bow?

That depends on the mounting pattern and clearance. Check compatibility with the rest maker and your bow’s riser before buying.

Why does my arrow still tear the paper high after setup?

Common causes include incorrect rest height, arrow spine mismatch, string nock point position, or a loose rest. Check each one before making large adjustments.

How often should I recheck my rest setup?

Check torque and alignment after the first few sessions, then periodically. Recheck after any change to arrows, string, cables or sight.

Does the MX2 need special arrows?

No special arrow is required, but arrows must be correctly matched to your bow in spine and point weight for good flight with any rest.

Conclusion

The Mathews Integrate MX2 arrow rest can deliver clean, consistent arrow flight when it is mounted correctly, timed carefully and tuned in small steps. Start with torque-checked mounting, set height and horizontal position, then refine timing and contact pressure. Use paper tuning and bare shaft comparisons to confirm results. If you are new to drop-away rests, take your time and record each change, and consider asking an experienced archer or a pro shop to look over your setup.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.