Hoyt Ultrarest Integrate Mx2 Arrow Rest: Setup, Tuning and Buying Guide
Learn how the hoyt ultrarest integrate mx2 arrow rest works, how to install and tune it, and what to check before you buy. Clear steps for new archers.
Updated November 2026
The hoyt ultrarest integrate mx2 arrow rest is a drop-away style rest built around a self-contained cable-and-spring system that sits in a bow’s riser. This guide explains what the rest does, how to install it, how to set its position and tension, and what to look for when you buy one. By the end, you should be able to mount it, tune it for clean arrow flight, and avoid the setup errors that cause most early frustration.
What the hoyt ultrarest integrate mx2 arrow rest does
An arrow rest holds the arrow in place before the shot and then gets out of the way as the arrow leaves the bow. A drop-away rest does this by lowering the arrow shelf out of the arrow’s path at release. The Hoyt UltraRest Integrate MX2 is designed as an integrated unit, meaning the rest mounts into the riser’s rest mounting area and uses the bow’s own cable system rather than a separate add-on cable. Manufacturers typically describe the design as reducing the number of loose parts and keeping the arrow path clear.
Before you work on any rest, confirm which bow mounting pattern you have. Integrated rests are usually matched to specific riser designs and mounting holes, so check the compatibility notes for your bow model and draw setup before ordering parts.
Tools and parts you need before starting
Setting up any drop-away rest goes faster when you have the right tools on hand. Gather these before you begin:
- The correct Allen (hex) keys for the rest and cable mounting screws, usually supplied with the rest or bow
- A bow square, or a plain square and a straightedge for checking arrow alignment
- A bow stand or a stable rack that holds the bow at the correct height
- An arrow with known spine and a field point or practice tip
- A paper tuning tool or a tuning target, and a foam or bag target at 5 to 10 yards
- A string wax or light lubricant suitable for your bowstring (use sparingly)
Step-by-step installation
Step 1: Confirm the mounting position
Start by checking that the rest mounting hole pattern on your riser matches the rest. Snug the mounting bolts finger-tight first. Do not fully tighten anything until the rest is aligned, because you will need to move it.
Step 2: Set the cable and drop-away travel
Follow the manufacturer’s instructions for connecting the cable to the rest’s activation point. The rest should lower the arrow shelf cleanly when the bow is drawn and return to its resting position when the bow is relaxed. Check that the cable does not bind against the riser or string at full draw. Adjust the cable length or travel stop only as far as the instructions allow.
Step 3: Align the rest with the nock point
Nock an arrow and set the rest so the arrow sits level and centered on the shelf. Use your bow square to check the arrow is square to the riser at the rest position. Tighten the mounting bolts gradually, rechecking alignment after each turn.
Step 4: Set the arrow height
Arrow height on the rest should place the arrow centered in your bow’s shot plane, with the arrow shaft level when the bow is at rest. Most archers find a level arrow at the nock point works as a starting point, then fine-tune from there.
Step 5: Check clearance
Draw the bow slowly several times and watch the arrow shelf and cable. The rest should move out of the arrow’s path during the shot without touching the fletching or shaft. Any contact points to a height or cable problem that needs correction before shooting for accuracy.
Tuning for clean arrow flight
Once the rest is mounted, tuning is what makes the arrow fly straight. Tuning is a process of adjusting the rest and the arrow relationship until the arrow leaves the bow without tearing paper or wobbling.
Paper tuning
Shoot an arrow through a sheet of paper stretched on a frame, about 3 to 4 feet from the bow. Look at the tear. A clean hole with the fletching holes in the center indicates good alignment. A tear with a tail above, below, or to one side indicates the rest needs adjustment in that direction.
Bare shaft tuning
Shoot a bare shaft (no fletching) at a target at about 10 to 15 yards. If the bare shaft lands on a different point than fletched arrows, the arrow is not flying straight. Adjust the rest in small increments and retest.
Making small adjustments
Move the rest one small step at a time. Changing the position by a large amount rarely helps and makes it harder to know which adjustment fixed the problem. Keep a written log of each change and the result.
| Symptom | Likely cause | Adjustment to try |
|---|---|---|
| Paper tear with tail to the left | Rest too far left or arrow pushing left | Move the rest slightly right |
| Paper tear with tail high | Arrow height too high or too low | Adjust vertical rest position in small steps |
| Bare shaft lands low | Arrow not level or rest height off | Raise rest slightly and retest |
| Rest contacts arrow on release | Cable travel or rest angle issue | Recheck cable and drop-away clearance |
Buying tips for the hoyt ultrarest integrate mx2 arrow rest
If you are shopping for this rest, check these points first:
- Confirm compatibility with your specific Hoyt riser model and mounting pattern.
- Check whether the kit includes the cable, mounting hardware, and any tuning tools.
- Look at the arrow diameter and shelf style your arrows need, since shelves are not all identical.
- Verify the rest’s drop-away action suits your draw length and bow weight.
- Buy from a seller who lists the exact model number so you do not receive a similar but different unit.
If you are comparing options, the articles below cover related setups and alternatives in more depth.
For a broader look at how this rest stacks up, see QAD Ultrarest Integrate MX2 Arrow Rest Review: Key Features Explained. If you are working on a similar integrated system, QAD UltraRest Integrate MX Arrow Rest: Setup, Tuning and Buying Tips covers closely related steps. Archers comparing it with a rival design may find Mathews Integrate MX2 Arrow Rest: Setup, Tuning and Buying Tips useful. For general background on how arrows are held in place, read What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained. If you are shopping across brands, 6 Best Arrow Rests for Hoyt Bows Compared (2026) gives a wider comparison.
Common mistakes
- Tightening everything before aligning. Leave bolts slightly loose until the rest is square and level.
- Ignoring cable clearance. A cable that brushes the riser or string will affect timing and accuracy.
- Making large adjustments. Small, logged changes are easier to read than big guesses.
- Skipping the paper test. Paper tuning is the fastest way to see how the arrow leaves the bow.
- Shooting a damaged rest. Check the shelf, cable, and springs for wear before each session.
Tips for long-term performance
Inspect the rest every few weeks. Look for loose bolts, frayed cable sheathing, and worn shelf surfaces. Keep the shelf clean, since grit can change how the arrow sits. Re-check tuning after changing arrows, string, or draw weight, because each of these shifts the relationship between the arrow and the rest. Bow care is closely tied to rest performance, so keep the string waxed and the cable free of debris.
Recommended gear
- Bow square – A bow square lets you check rest alignment quickly and repeatably, which matters more than most beginners expect. View on Amazon
- Paper tuning frame – A frame holds paper taut so each shot gives a clear tear pattern for tuning. View on Amazon
- Bow stand – A stable stand keeps the bow at a consistent height while you adjust the rest. View on Amazon
- Bowstring wax – Light wax protects the string and helps the rest’s cable stay clean in use. View on Amazon
FAQ
Is the hoyt ultrarest integrate mx2 arrow rest good for beginners?
It can work well for beginners who are comfortable with basic setup, but the tuning process takes patience. Consider having an experienced archer or a pro shop check your first setup.
Do I need a bow press to install this rest?
A bow press is not required for most installations because the rest mounts to the riser without changing the string or limbs. Always follow the manufacturer’s instructions, and have a professional handle any work involving the bow’s limbs or string.
How do I know if my arrow is too long or too short for the rest?
Check that the arrow shaft sits fully on the shelf without the nock or fletching contacting the rest body. An arrow that overhangs the shelf or sits too far back can cause clearance and flight problems.
What is the most common reason for poor arrow flight with this rest?
Misalignment of the arrow relative to the riser and nock point is the most frequent cause. Paper tuning will usually show whether the rest or the arrow is the problem.
How often should I check the rest’s cable and springs?
Check them before each shooting session at first, then every few weeks once you know the setup is stable. Replace worn parts promptly.
Can I use any arrow with this rest?
Most arrows will fit, but shelf style and arrow diameter matter. Confirm the rest’s shelf and your arrow’s diameter are compatible before buying.
Should I consult a professional for setup?
Yes, if you are unsure about any step, especially cable tension or anything involving the bow’s limbs. A qualified archery technician can check your work and suggest adjustments that suit your shooting style.
Conclusion
The hoyt ultrarest integrate mx2 arrow rest is manageable to install and tune once you work methodically. Confirm compatibility, mount it with loose bolts until aligned, then use paper and bare shaft tests to refine arrow flight. Keep a log of your adjustments and inspect the rest regularly, and it should give you consistent, clean arrow flight.
Ready to choose one?
