We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Bow Sight Light Battery Size: How to Find and Replace the Right One

Bow sight light battery size guide: learn how to find the correct battery type, check your sight's markings, and replace it safely so your pins stay bright.

Updated November 2026

A bow sight light battery size is usually printed on the sight housing, in the owner’s manual, or on the battery compartment cap. Finding it takes about two minutes, and it saves you from guessing at the store or forcing the wrong cell into a tight holder. This guide shows you where to look, how to confirm the match, and how to swap the battery without damaging the sight.

Step 1: Check the Sight and Its Packaging

Start with the sight itself. Many manufacturers stamp the battery type on the housing near the light module or on the cap that covers the battery compartment. If the marking is worn, the original box or the printed manual will usually list the exact cell. The Battery for Bow Sight Light: How to Choose, Install and Replace It article covers how these labels are typically laid out across different brands.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Step 2: Match the Battery Type and Size

Most bow sight lights run on small button-style lithium or silver oxide cells. These are identified by a letter and number code, such as a coin-cell designation, and the code tells you both the diameter and the thickness. Common sizes for sight lights are in the coin-cell family, but exact sizes vary by model, so do not assume one size fits every sight.

Compare the code on your old battery with the code printed on the sight. If they match, you have the right cell. If the old battery is missing or unreadable, check the manual before buying. The Trophy Ridge Bow Sight Battery Size: Which Battery to Use (2026) guide shows how this works for one common family of sights.

Step 3: Confirm the Fit Before You Buy

A battery that is too thin may not make contact, and one that is too thick may not close the cap. Before you buy, measure the diameter and height of the old cell with calipers if you have them, or a ruler if you do not. Compare those numbers with the code. Coin cells follow a standard naming pattern, so the code usually tells you both dimensions.

Checklist before you replace

  1. Read the code on the old battery or the sight housing.
  2. Confirm the code in the owner’s manual or the manufacturer’s site.
  3. Note the diameter and thickness if the code is unclear.
  4. Buy a fresh cell from a reputable source with a clear expiration date.
  5. Keep a spare on hand if you shoot in cold weather or during long sessions.

Step 4: Replace the Battery Correctly

Turn the sight light off first. Open the compartment with the tool the manufacturer specifies, usually a small screwdriver or the fingers if the cap is designed to twist by hand. Note which way the positive (+) side faces before removing the old cell. Install the new battery with the same orientation, then close the cap until it is snug but not overtightened. Test the light before you head to the range.

Common Mistakes

  • Guessing the size from a photo or memory instead of reading the code.
  • Installing the battery upside down, which can leave the light dark.
  • Overtightening the cap, which can strip threads or crack a gasket.
  • Ignoring the sight’s own manual, since battery requirements differ by model.
  • Leaving a weak battery in place during cold weather, when it may fail sooner.

FAQ

Can I use a different battery size if I cannot find the original?

Only if the diameter and thickness match exactly. A mismatched cell may not seat, may lose contact, or may damage the holder. Check the manual or contact the manufacturer for the correct type.

How do I know when the battery needs replacing?

Common signs include a dim or flickering light, or a light that does not turn on. Replace the cell before a long shooting trip rather than waiting for a failure.

Should I remove the battery during storage?

Many archers do so for long periods without shooting, which helps prevent leakage. Check your manual, since some manufacturers give specific storage guidance.

Conclusion

To find the right bow sight light battery size, read the code on the old cell or the sight housing and confirm it against the manual. Match the diameter and thickness, install the new cell with the correct polarity, and test the light before you shoot. For model-specific setup help, consult the manufacturer or a qualified archery pro shop.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.