Compound Bow Right Handed: How to Choose and Set Up Yours Correctly
Learn how a compound bow right handed setup works, how to confirm your draw side, and which fit and setup checks matter before you buy or shoot.
Updated November 2026
A compound bow right handed setup is built for an archer who holds the bow in the left hand and draws the string with the right hand. In this guide, you will learn how to confirm you are a right-handed shooter, check that a right-hand bow fits you, and make sure your arrow rest and sight are set up for the correct side. Getting the handedness right at the start saves frustration and keeps your groups tight.
Confirm Your Dominant Eye and Draw Hand
Handedness on a compound bow refers to the hand you draw with, not the hand you write with. Many archers are right-handed in daily life but are left-eye dominant, and that mismatch can cause problems with aiming. Hold a closed-fist test: extend both arms, make a small triangle with your hands, and look through it at a distant object with both eyes open. Close one eye at a time. The eye that keeps the object centered is your dominant eye.
Shopping for one? See our guide: 6 Best Left Handed Drop Away Arrow Rest Picks for Compound Bows (2026).
If your dominant eye is on the same side as your draw hand, a right-handed bow is usually the right choice. If your eye and draw hand disagree, consider a cross-dominant setup or a different sighting approach, and ask a qualified archery coach to watch you shoot before you commit to equipment.
Choose a Right-Handed Bow Correctly
Bow handedness is defined by the side the string hand is on. A right-handed compound bow is drawn with the right hand, so the cams, cable guard and grip are oriented for a right-side draw. Most manufacturers label the handedness clearly on the bow and in the product listing, so check that label before ordering.
Next, confirm draw length and draw weight. Manufacturers specify an adjustable draw length range and a peak draw weight, and both should match your measured draw length and a weight you can hold steady for several seconds. An incorrect draw length is a common reason beginners develop poor form, so measure carefully before you shop.
Measuring your draw length
- Stand relaxed with your feet shoulder-width apart and arms out to the sides.
- Have a helper measure from the tip of one middle finger to the other, in inches.
- Divide that number by 2.5. The result is a rough draw length estimate.
- Confirm with a pro shop fitting if you can, since stance and anchor point affect the final number.
Set Up the Arrow Rest and Sight for a Right-Hand Bow
Once the bow is the right handedness and length, the accessories need to match. A right-hand bow usually places the arrow rest and sight on the appropriate side of the riser, and the rest must be mounted so the arrow clears the riser without contact. Many archers use a right-handed rest on a right-hand bow, and a right-handed sight bracket for the same setup.
Check that the arrow rest is positioned so the arrow sits centered on the bow’s center shot line. Adjustments are easiest when the bow is placed in a stand and the rest is loosened only enough to move. Tighten everything before you shoot, and recheck after the first few shots, since vibration can shift small screws.
Practical Checklist
- Identify your dominant eye with the triangle test.
- Confirm the bow is labeled right-handed.
- Measure draw length and check it against the bow’s adjustment range.
- Match the draw weight to a level you can control.
- Mount the arrow rest and sight on the correct side and confirm clearance.
- Recheck all fasteners after your first session.
Common Mistakes
- Buying by hand-writing preference instead of draw-hand and eye dominance.
- Setting draw weight too high, which causes jerky releases.
- Ignoring draw length and relying on a generic setting.
- Mounting the arrow rest or sight on the wrong side of the riser.
- Skipping a final tightness check before shooting.
Recommended Gear
- Bow stand: keeps the bow upright so you can make rest and sight adjustments without bending the string or cams. View on Amazon
- Bow square: helps you check that the arrow and rest align with the string, which matters on any handedness. View on Amazon
- Hex key set: useful for fine adjustments to rests, sights and cable guards during setup. View on Amazon
FAQ
Can a left-handed archer use a right-handed compound bow?
Not comfortably. A right-handed bow is designed for a right-side draw, so a left-handed archer should use a left-handed bow matched to their draw hand.
Does handedness affect accuracy?
Indirectly, yes. The main accuracy factor is whether your dominant eye lines up with your draw side, so the handedness choice should follow your eye test.
Should I get a professional fitting?
It is strongly recommended. A qualified archery technician can check draw length, weight and accessory placement. Consult a professional to confirm your setup before shooting regularly.
Conclusion
A compound bow right handed setup begins with knowing your draw hand and dominant eye, then matching draw length, draw weight and accessories to that side. Measure carefully, mount everything correctly and recheck fasteners after shooting. For more setup help, read How to Sight in Compound Bow: A Step-by-Step Guide for Beginners and Compound Bow Arrow Rest Adjustment: A Step-by-Step Guide for Beginners.
Related reading
- Compound Bow Hoyt for Sale: How to Buy the Right Hoyt Setup
- 7 Best Right Handed Bow Arrow Rest Picks Compared (2026)
Ready to choose one?
