We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Compound Bow Sight Adjustments: A Step-by-Step Guide for Beginners

Learn compound bow sight adjustments step by step, from setting the sight level to tuning pin gaps at 20, 30 and 40 yards for accurate shots.

Updated November 2026

Compound bow sight adjustments let you line up your pins so each one matches a specific distance. This guide walks you through leveling the sight, setting windage, and tuning pin gaps so you can hit the same spot from close range to long range. You will need a stable bow, a target, and about an hour at the range.

Before You Adjust: Check the Basics

Sight adjustments only work if the bow itself is set up correctly. Before touching a single screw, confirm that your arrow rest is positioned properly and that your nock travel and cam timing are consistent. If your bow is shooting erratically, a sight adjustment will not fix it. For a broader setup walkthrough, read How to Sight in Compound Bow: A Step-by-Step Guide for Beginners.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026). A related read: Compound Bow for Deer Hunting: Draw Weight, Setup and Shot Tips.

Step-by-Step Compound Bow Sight Adjustments

Work through these steps in order. Changing one setting often shifts the others, so do not skip ahead.

  1. Mount the sight so the sight housing sits level with the riser and the arrow runs straight down the center of the sight window.
  2. Set your windage first by aligning the sight with the arrow path at full draw. Shot groups that drift left or right need horizontal movement of the sight.
  3. Shoot a group at 20 yards with your top pin. Adjust vertical position until the arrows land where you aim.
  4. Move back to 30 yards and place the second pin. Repeat at 40 yards, then 50 yards if your bow allows.
  5. Confirm each pin with a fresh group of three to five arrows before locking all screws in place.

Adjusting Windage

Windage controls left and right movement. Loosen the windage screw slightly, shift the sight in small increments, and shoot a group after each change. Most shooters find that a quarter turn moves the group noticeably at 20 yards.

Adjusting Elevation

Vertical adjustment, often called elevation, is what moves your pin gaps. Raising the sight moves impact lower, and lowering it moves impact higher. If you are unsure which way to turn, read Bow Sight Adjustment Up or Down: A Step-by-Step Guide for Beginners.

Tuning Pin Gaps

Pin gaps should match the distance spacing you need in the field. A common approach is 20, 30, 40 and 50 yards for a four-pin sight. Adjust individual pins if your sight allows it, and write down each distance so you can repeat the setup later.

Tools and Setup Checklist

  • Hex or Allen keys matching your sight screws
  • A bubble level or a level app for checking the sight
  • A target at known distances, marked at 20, 30 and 40 yards
  • A notebook to record pin positions and group sizes
  • A bag of arrows of the same spine and weight

Common Mistakes to Avoid

  • Changing several settings at once, which makes it impossible to tell what fixed the problem.
  • Tightening screws before confirming the group is where you want it.
  • Shooting while tired or rushing, which hides the real impact point.
  • Ignoring a loose sight bracket, which can shift your pins between sessions.
  • Judging adjustments from one or two arrows instead of a full group.

A bubble level or small sight-leveling tool helps you keep the sight square to the riser, which makes horizontal adjustments more predictable. View on Amazon

A set of hex keys in the sizes your sight uses prevents stripped screws during tuning sessions. View on Amazon

A target with printed distance rings gives you a consistent reference for pin gap work. View on Amazon

FAQ

How often should I check my compound bow sight adjustments?

Check your sight whenever you change arrows, draw weight, or string. A quick group at 20 yards is often enough to confirm nothing has shifted.

Can I adjust the sight without a range?

You can set a rough level and windage at home, but final pin gaps need real shooting at measured distances. A safe backstop and a marked target are required.

What if my groups still move after adjusting?

Inconsistent groups usually point to form, release, or bow tuning rather than the sight. Consult a qualified archery coach or pro shop if the problem continues.

Conclusion

Compound bow sight adjustments become straightforward once you follow a fixed order: level, windage, elevation, then pin gaps. Record each setting so you can repeat your setup. With consistent groups and clear notes, your pins will track reliably from close range to longer shots.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.