Single Pin Bow Sight Hunting: Setup, Sight-In and Pin Tips for New Hunters
Learn how to set up and sight in a single pin bow sight for hunting, including pin placement, distance marks and common mistakes that cost accuracy in the field
Updated November 2026
A single pin bow sight for hunting gives you one aiming point that you can adjust for different distances, which keeps your setup simple and your aim consistent. This guide walks you through mounting the sight, setting your pin for a few yardages, and checking your work before you head into the field. Most new hunters can get a usable setup in an afternoon with a target and a measuring tape.
Know What a Single Pin Sight Does
A single pin sight uses one moving pin that you set for each distance you expect to shoot. Because you only see one pin, there is less visual clutter when you are holding steady on an animal. The tradeoff is that you need to adjust the pin for every yardage, so the setup work up front matters more. If you are still choosing between sight types, the article Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners? compares the two styles.
Set Up the Sight Before You Sight In
- Mount the sight bracket to the bow riser following the manufacturer’s torque and position specifications. Keep the sight level with the arrow path.
- Check that the sight housing moves freely and that the pin slides smoothly without binding.
- Confirm your draw length and anchor point are consistent. A sight will not compensate for a changing anchor.
- Set your bow to the draw weight you will hunt with, and use your hunting broadhead or a practice tip of the same weight if possible.
For mounting details on a specific model, see Hha Picatinny Bow Sight: How to Mount and Set Up Your Pin Sight.
Sight In Your Pin at Hunting Distances
Start at a short, known distance such as 10 yards and shoot groups until your arrows hit the same spot. Adjust the pin until the group centers on the target’s aim point. Then move back in set increments, typically 10 or 20 yards, and mark each pin position on the sight tape or with a label.
| Step | Action | What to Check |
|---|---|---|
| 1 | Shoot 3 arrows at 10 yards | Group size under 3 inches |
| 2 | Adjust pin to group center | Arrows hit the aim point |
| 3 | Move to 20, 30, 40 yards | Mark pin position at each distance |
| 4 | Shoot a final group at each mark | Consistent impact within vital zone |
If you want a step-by-step walkthrough of this process, How to Sight in a Single Pin Bow Sight: A Step-by-Step Guide covers each stage in more detail.
Use Distance Marks in the Field
Once your marks are set, confirm the distance with a laser rangefinder or a pre-measured landmark before you draw. Estimating distance by eye is the most common reason hunters miss high or low. Keep your marks visible, and if you use a sight tape, check that it has not shifted during transport. A sight that is well set up will still miss if you misjudge yardage, so treat the rangefinder as part of your setup.
Common Mistakes to Avoid
- Sighting in at one distance and assuming the rest will follow. Test at every yardage you plan to shoot.
- Changing your anchor point or release between practice and the field.
- Skipping a group check after changing arrows, broadheads or draw weight.
- Leaving the pin uncalibrated after a bow service or sight adjustment.
- Shooting at unknown distances instead of confirming yardage first.
If your arrows consistently land low, check the causes in Why Does My Bow Shooting Low Move Sight Pin Point Down? Causes and Fixes.
Recommended gear
A stable target and a reliable rangefinder help you sight in accurately and confirm distances in the field. A quality arrow set matched to your draw weight keeps your groups consistent, which makes pin marks more trustworthy.
- Field target with replaceable faces: lets you repeat groups at each distance without tearing up your target. View on Amazon
- Laser rangefinder for archery: confirms distance before the shot, which is the step most often skipped. View on Amazon
- Carbon hunting arrows matched to your spine: consistent flight makes pin marks reliable. View on Amazon
FAQ
How many yards should I sight in a single pin sight for hunting?
Most hunters mark pins at 10, 20, 30 and 40 yards, since those cover the range where most shots happen. Mark only the distances you realistically expect to shoot in your hunting setting.
Can I use a single pin sight for hunting with a broadhead?
Yes, but sight in with the broadhead you will hunt with, because broadheads can fly differently from field points. Check your arrow setup against the manufacturer’s recommendations.
How often should I recheck my pin settings?
Recheck after any bow adjustment, sight remount, change in arrows, or extended time off, and do a quick group check before each hunting season. Consult a professional bow technician if you are unsure about your setup.
Conclusion
A well set up single pin bow sight for hunting is simple to use once your marks are accurate and your form is consistent. Take time at the range to test each distance, and confirm yardage in the field before every shot. Keep your setup stable, and recheck it regularly.
Related reading
- What Is a Horizontal Single Pin Bow Sight and How Do You Set One Up?
- Single Pin Dial Bow Sight: How to Set Up and Sight In for Beginners
Ready to choose one?
