We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Hip or Back Quiver: How to Choose and Wear the Right One

Deciding between a hip or back quiver? Learn how each carries arrows, which suits your shooting style, and how to fit and set up yours.

Updated November 2026

A hip or back quiver is the arrow case you wear on your body while shooting, and choosing between them comes down to your bow style, your draw, and how you move on the line. This guide explains how each position works, how to decide which fits you, and how to set it up so arrows stay secure and reachable. You will finish with a clear choice and a fitting routine you can repeat at any range.

How Hip and Back Quivers Differ

A hip quiver sits on your belt at the front or side of your hip, with arrows angled so you can reach them with your string hand. A back quiver rides between your shoulder blades, with arrows pointing up over your shoulder. Both hold arrows out of the dirt and away from your bow arm, but they suit different shooting habits. Hip quivers are common with recurve and target archers who want a short reach. Back quivers are more common with traditional shooters who want a clean line of sight and a fast, consistent draw.

Shopping for one? See our guide: Bear Archery Traditional Back Quiver Review (2026).

Choosing the Right Position for Your Style

Start with how you shoot, not with what looks good. Shoot a few ends with your current setup and notice where your hand naturally goes when you reload.

  • Choose a hip quiver if you shoot recurve or compound from a standard stance and want arrows within a short reach.
  • Choose a back quiver if you shoot traditional equipment, want your hips free of bulk, or plan to shoot in a field or mounted setting.
  • Consider a combination if you switch between target and field shooting. Some archers keep one of each and rotate them by range.

For a broader look at how arrows are held in general, see What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained.

Step-by-Step Setup for a Hip or Back Quiver

  1. Put the quiver on before you tie in or set your stance, so the fit is tested under real conditions.
  2. For a hip quiver, buckle the belt snugly at the hip bone. The quiver body should not swing when you walk.
  3. For a back quiver, position the harness so the quiver sits level between your shoulder blades, with the mouth just below shoulder height.
  4. Draw one arrow and seat it. Check that you can reach it without bending your torso or looking down.
  5. Full draw and release a few times. Confirm the quiver does not snag the string, fletching, or your clothing.
  6. Walk a few steps and check that arrows stay put. Adjust the angle or tension until they do.

Checking Arrow Retention

Arrows should slide in and out with light friction and stay put when you move. If they rattle or fall out when you bend, tighten the retention or adjust the quiver angle. Owners often report that a slight forward tilt on hip quivers makes reloading faster.

Fitting the Harness

On back quivers, the straps should distribute weight across both shoulders. Loose straps let the quiver shift during the draw, which changes arrow reach. Tighten until the quiver stays steady when you raise your arms overhead.

Common Mistakes to Avoid

  • Setting the quiver too low, which forces you to bend and breaks your rhythm.
  • Letting arrows touch the bowstring or limbs during the draw.
  • Skipping the walk-and-move test, then finding arrows fall out mid-round.
  • Choosing a position based on what a friend uses rather than your own reach and draw.
  • Overloading the quiver so the belt or harness pulls your posture out of line.
  • Hip quiver: A belt-mounted model with adjustable retention helps you tune arrow angle for a short reach. View on Amazon
  • Back quiver: A leather back quiver with a padded harness keeps weight stable across the shoulders. View on Amazon

If you are comparing specific models, 3 Best Archery Hip Quivers: Top Picks Compared for 2026 and Hill Style Back Quiver: How to Choose, Fit and Use One (Step-by-Step) cover the features to look for in more detail.

FAQ

Is a hip or back quiver better for beginners?

A hip quiver is usually easier for beginners on recurve or compound because the reach is short and familiar. Try both if your range allows, and pick the one that keeps your draw consistent.

Can I use a back quiver with a compound bow?

Yes, many compound shooters use back quivers, but check that the quiver does not interfere with the cams, string, or your release hand. Test the full draw before you commit.

Should I consult a professional before buying?

If you have shoulder, back, or hip problems, check with a physical therapist or a qualified archery coach before choosing a position. They can help you judge what load and reach your body handles comfortably.

Conclusion

A hip or back quiver should match how you draw, reach, and move on the line. Set it up with a fitting test, check arrow retention while walking, and adjust until nothing shifts during the shot. Once it fits, you can focus on your form rather than your arrows.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Archery Society.