Garmin A1i Pro Bow Sight: Setup, Pin Tuning and Use Guide
Learn how the garmin a1i pro bow sight works, how to set it up on a compound bow, and how to tune pins for accurate shots at distance.
Updated November 2026
The garmin a1i pro bow sight is a rangefinder-equipped sight that helps you judge distance and select the correct pin for your shot. This guide walks you through mounting the sight, setting your pins, and using the rangefinder so you can shoot with confidence at unfamiliar distances. Always read the manufacturer’s manual first, since specific steps and settings can change between firmware versions.
Before You Mount the Sight
Start with a stable bow and a clean mounting area. Check that your sight bracket is tight and that your riser is free of debris. Confirm you have the right mounting hardware for your bow, because a loose sight will shift your point of impact more than almost any other problem.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
- Hex keys or driver matching the mounting screws
- Thread-locking compound, if your manufacturer recommends it
- A bow square or level
- A target at known distances, such as 20, 30 and 40 yards
- Fresh batteries and the manufacturer’s manual
Mounting and Leveling the Sight
Attach the sight to your bracket and keep the screws snug but not overtightened. Use a bow level to confirm the sight is plumb, because a tilted sight will send arrows left or right of your intended aim. Adjust the sight’s horizontal and vertical position until the reticle is centered in your peep and the bow sits square when you draw.
Setting Pins and Tuning for Distance
Pin tuning is the step most beginners rush, and it is where accuracy is won. Shoot a group at one known distance, then adjust the pin for that yardage until your arrows strike the center of the target. Repeat for each distance you plan to shoot. Work from the closest distance outward, and shoot at least three arrows before making any change so you are reacting to a pattern rather than a single shot.
- Set your bow to your normal draw length and weight.
- Shoot three to five arrows at 20 yards and note the group center.
- Adjust the first pin until the group sits in the center of the target.
- Move to 30 yards and repeat the process for the second pin.
- Continue for each pin you plan to use, then confirm with a final group at each distance.
Using the Rangefinder in the Field
The rangefinder gives you a distance reading that you match to the correct pin. Aim at your target, take the reading, and select the pin you tuned for that distance. In real hunting or field conditions, check the reading against a known landmark when possible. Remember that your first reading may not reflect the animal’s true position if it is moving, so take a fresh reading before you draw.
Common Mistakes
- Tuning pins with only one arrow, which tells you very little about your true group.
- Forgetting to recheck tuning after changing draw weight, draw length or arrow setup.
- Letting batteries run low, which can leave you without a working rangefinder when you need it.
- Shooting from an unlevel stance, which pulls your pins off target.
- Ignoring a loose sight bracket during a session, which can quietly ruin your zero.
Recommended gear
A good bow level helps you mount the sight square and confirm it stays that way after adjustments. View on Amazon
A target with clearly marked yardage lines lets you tune pins quickly at several distances in one session. View on Amazon
Spare batteries for your sight mean a dead battery will not end your practice or hunt early. View on Amazon
FAQ
Do I need to re-tune the garmin a1i pro bow sight after changing arrows?
Yes. Different arrow weights and lengths change your arrow’s flight path, so your pin settings can shift. Retune at each distance after any change to your arrow setup.
How often should I check the sight’s alignment?
Check alignment before each shooting session and after any impact or transport. A quick group at a known distance will reveal a shift faster than visual inspection alone.
Can the rangefinder replace practice at distance?
No. The rangefinder gives you a reading, but accuracy still depends on your form, release and tuning. Regular practice at varied distances is what builds consistent shots.
Conclusion
With the sight mounted level and your pins tuned at several known distances, the garmin a1i pro bow sight becomes a reliable tool rather than a guessing aid. Take time with the tuning process and recheck it whenever your setup changes. For guidance on related setup steps, see Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide and How to Adjust Arrow Rest on Compound Bow: A Step-by-Step Guide for Beginners.
Related reading
- Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes
- Traditional Bow Arrow Rest: 7 Best Picks Compared for 2026
- Top 7 Archery Bow Arrow Rest Options Compared for Recurve and Compound Bows
- Top 3 Rip Shot Archery Release Aids Compared for Compound Bows
- Recurve Bow Arrow Rest Placement: A Step-by-Step Guide for Beginners
Ready to choose one?
