We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

G5 Optix Bow Sight: Setup, Pin Tuning and Tips for Beginners

Learn how to set up a G5 Optix bow sight, tune the pins and sight in at 20, 30 and 40 yards. Clear steps and common fixes for new archers.

Updated November 2026

A G5 Optix bow sight is a single-pin or multi-pin sight that you set up by mounting it to the riser, leveling it, and then sighting in each pin at a set distance until your arrows group where you aim. Most new archers get the best results by starting at 20 yards, confirming the pin lands where the arrow lands, and then working outward one distance at a time.

Why a G5 Optix Bow Sight Shoots Off Target

When a sight seems to shoot all over the place, the cause is usually setup rather than the sight itself. Pins that were never leveled, a loose mounting bracket, or a bow that is tuned poorly will throw arrows in different directions no matter how carefully you aim. Before you touch the pin adjustments, check that the sight body sits square to the arrow and that the bracket screws are snug but not overtightened.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Factors That Affect Your Pin Settings

Pin positions depend on draw length, draw weight, arrow speed, arrow weight and the point weight you shoot. Changing any of these shifts where the arrow lands. If you change your arrows or add a heavier broadhead, expect to re-sight. Your peep height and anchor point matter too: a consistent anchor puts your eye in the same place every shot, which keeps the sight picture stable.

Shooting form matters as much as hardware. Torque, a jerky release or a changing grip can throw arrows off by several inches at 30 yards. If your groups are wide even with the sight set correctly, work on form first. A bow shop or certified instructor can watch you shoot and point out problems you may not feel yourself.

How to Set Up and Sight In Your Sight

  1. Mount the sight to the riser using the bracket, keeping the sight body centered over the arrow.
  2. Level the sight vertically using the bubble level or the plumb method, so the pin guard sits straight up and down.
  3. Set the peep sight so the sight window lines up with your eye at full draw.
  4. Shoot at a target 20 yards away. Adjust the top pin until the arrows hit the bull.
  5. Move to 30 yards and adjust the next pin. Repeat for 40 yards and beyond.
  6. Make small adjustments only, usually a quarter turn at a time, and shoot a full group before changing anything again.

Practical Tips for New Archers

  • Sight in with the same arrows and broadheads you plan to hunt or compete with.
  • Shoot from a fixed distance and mark each pin with a label so you remember which is which.
  • Check bracket screws and pin tightness before each session.
  • Keep a log of distance, pin position and group results so you can repeat your setup later.

What We’d Use

A bow sight level is useful for getting the sight perfectly vertical before you start adjusting pins. View on Amazon

A bow sight magnifier lens helps you see small pin movements at distance, which makes fine tuning easier. View on Amazon

For more on setup and related sights, see Xero A1i Pro Bow Sight: Setup, Pin Tuning and Tips for New Archers, Mounting a Bow Sight: A Step-by-Step Guide for Beginners, Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners? and Universal Bow Sight Magnifier Lens: How to Choose and Use One (Step by Step). Always check the manufacturer’s manual for torque specs and recommended procedures.

FAQ

Do I need a level to set up a G5 Optix bow sight?

A level is strongly recommended. An unlevel sight causes arrows to drift left or right at distance, even when your aim is correct.

How far should I start sighting in?

Most archers start at 20 yards with a stable, well-tuned bow. Start closer if your groups are wide.

Why do my arrows still miss after sighting in?

Check your form, anchor point and release first. If those are consistent and groups are still off, have a bow shop check your bow tuning.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.