We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Copper John Dead Nuts Bow Sight: Are They Compatible and How to Mount Them?

Can you use a copper john dead nuts bow sight together? Here's how the parts fit, what to check before mounting, and how to avoid common setup problems.

Updated November 2026

A copper john dead nuts bow sight setup is not a standard, single product, so the question of whether the two work together usually comes down to mounting hardware and how the sight is configured. In short, Copper John stabilizers and Dead Nuts sight-related accessories are generally discussed by archers as separate add-ons, and fit depends on your bow’s riser threads, sight bar, and clamp size. Confirm thread size and bar diameter before you buy anything.

Why compatibility questions come up

Most owners asking about a copper john dead nuts bow sight combination are trying to mount a sight or sight-adjacent part onto a bow that already has a Copper John stabilizer or a dead-nut style vibration reducer. Those parts all attach to the riser through threaded holes, and the threads are not always the same. A stabilizer bushing that is loose or slightly oversized can keep a sight bracket from seating flat.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Owners often report that the trouble is less about the sight itself and more about where the mounting bracket lands relative to the arrow rest and the sight window. If the bracket sits too close to the riser’s cutout, you may see clearance issues or limited vertical adjustment.

What to check before you mount

Before tightening anything, measure and inspect the factors that actually decide fit:

  • Thread size and pitch. Most archery accessory threads are metric or imperial in a few common sizes. Mismatched threads can strip the riser boss, which is an expensive repair. Use a thread gauge or check the manufacturer’s spec sheet.
  • Sight bar diameter. Many sight extensions use a bar of a specific diameter. A bracket with a loose fit will wobble; one that is too tight can crack a clamp.
  • Clearance to the arrow and rest. Mount the sight, draw the bow lightly, and check that the sight housing does not contact the arrow fletching or the rest arm.
  • Bow manufacturer guidance. Many bow makers publish maximum torque values for riser accessories. Stay within those numbers.

Step-by-step setup

  1. Unstring the bow and place it on a padded surface, riser facing up.
  2. Remove any existing stabilizer bushing or sight bracket you are replacing and clean the threads with a dry cloth.
  3. Thread the bracket by hand first to confirm it starts straight. Cross-threading is a common cause of stripped holes.
  4. Snug the fasteners evenly, then tighten to the torque value in the manufacturer’s instructions. If none is given, use a light hand and a small amount of blue thread-locker on steel fasteners.
  5. Re-string the bow and check that the sight moves freely through its full range of adjustment without touching the riser or limb.
  6. Sight in at a known distance, and recheck torque after the first few shooting sessions, since vibration can loosen fasteners.

What we’d use

For a general-purpose bow sight that mounts to a standard riser, look at a Trophy Ridge React V5 for a multi-pin option with a common mounting footprint, and check reviews for thread and bar compatibility before ordering. View on Amazon

If you want a simpler single-pin design that is easier to mount and adjust, a Redline Torch bow sight is another widely available option to compare against your bow’s bracket pattern. View on Amazon

If you are still deciding on a sight style, Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners? covers the trade-offs. For the basic mounting process, see Mounting a Bow Sight: A Step-by-Step Guide for Beginners. Once the sight is on, Dead Nuts Bow Sight: How to Set One Up for Accurate Shots explains sight-in technique, and Peep Sight on Bow Keeps Twisting? How to Fix It Step by Step helps if your peep rotates under string tension.

FAQ

Can I use a copper john dead nuts bow sight setup on any bow?

Not always. Compatibility depends on your riser’s thread size, the sight bar diameter, and clearance to your rest. Check your bow’s specs before buying.

What happens if I overtighten the sight bracket?

You can strip the threads in the riser or crack the bracket. Tighten to the manufacturer’s torque value, and stop when the fasteners are snug and the bracket no longer shifts.

Should I consult a professional bow technician?

If you are unsure about thread size, riser damage, or torque limits, a qualified archery pro shop can check the fit safely. Bow setup involves tension and stored energy, so when in doubt, ask for help.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.