We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How Do You Check It Bow Sight Accuracy? Steps for New Archers

Learn how to check it bow sight alignment and accuracy in a few steps. Simple tests, common causes of drift and fixes that help beginners sight in faster.

Updated November 2026

To check a bow sight, shoot a tight group at a known distance, then compare where your arrows land with where your sight pins are aimed. If the group sits away from your aim point, the sight is misaligned, the pins are set wrong for that distance, or your form is changing from shot to shot. Checking it bow sight accuracy takes patience, a stable bow and a consistent anchor.

Why a Bow Sight Seems to Be Off

Most sight problems come from one of three sources. The first is mounting: a sight that is loose, tilted or not square to the riser will shift point of impact. The second is pin setup: a pin set for 20 yards will hit low at 30 yards, so a sight that looks wrong may just be sighted for the wrong distance. The third is the archer. Changes in grip, draw length, anchor point or release can move arrows more than a small sight error.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Start by ruling out the bow and the shooter before you adjust anything. A sight should never be adjusted to chase a group that is still scattered.

Factors That Affect Sight Accuracy

  • Mounting security: Check that the sight bracket and mounting bolts are snug. Use a torque setting if the manufacturer lists one.
  • Level and alignment: A sight that sits tilted will make vertical pins drift sideways at longer distances.
  • Draw length and anchor: A change of even a quarter inch at the anchor moves the point of impact.
  • Release and grip: Torque in the grip or a plucking release can pull arrows in one direction.
  • Arrow spine and point weight: A mismatched arrow can fly off its expected path, which looks like a sight problem.

How to Check It Bow Sight Step by Step

  1. Set up a target at a single known distance, such as 20 yards, on a stable stand.
  2. Confirm the bow is tuned. Paper tuning or a bare-shaft test will show whether arrows fly straight.
  3. Shoot a group of three to five arrows with the same anchor, release and follow-through.
  4. Measure the center of the group against your aim point. Note whether it sits left, right, high or low.
  5. Adjust the sight only if the group is tight. Move the windage or elevation a small amount, then shoot another group.
  6. Repeat at a second distance to confirm the pin spacing is correct across the range.

Practical Tips for Beginners

  • Shoot from the same spot each time and mark your stance on the ground.
  • Use a stable rest or stand when checking sight alignment so the bow does not move between shots.
  • Make small adjustments. Large changes usually overshoot and make the problem harder to find.
  • Keep a log of distances, pin positions and group results so you can see patterns.

What We’d Use

A simple bow sight level helps confirm the sight is square to the riser before you start adjusting pins. Look for a clear, bubble-style level that clips onto the sight housing: View on Amazon.

For shooters who want to see their pin positions more clearly while checking alignment, a bow sight magnifier lens can make small pin adjustments easier to judge: View on Amazon.

For a closer look at the adjustment steps on a specific model, read Mounting a Bow Sight: A Step-by-Step Guide for Beginners and Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners?. If a pin keeps drifting, Peep Sight on Bow Keeps Twisting? How to Fix It Step by Step covers a related alignment issue.

FAQ

How far should I shoot when checking my bow sight?

Start at 20 yards, where most beginners can form a reliable group. Then check a second distance, such as 30 yards, to confirm the pin spacing.

How many arrows do I need in a group?

Three to five arrows is enough to see a pattern. Shoot the same way each time so the group reflects the sight, not random form changes.

When should I see a professional about my sight?

If the sight is damaged, loose after tightening, or the group stays scattered after your form is consistent, ask a qualified pro shop technician to inspect the bow and sight.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.