Bow Shooting Left: Which Way to Move Sight for Right-Hand Shooters
Bow shooting left? Learn which way to move your sight pin, why it happens, and the simple adjustments that fix left-group arrows in a few shots.
Updated November 2026
If your arrows keep landing left of the bullseye, move your sight pin to the left, so the pin sits further left on the target. That shifts the pin’s aim point right, and your arrows will move right. Make small changes, shoot a group after each one, and stop when the group centers.
Why Your Arrows Land Left
Bow shooting left almost always comes from one of three sources: the sight is set up incorrectly, the bow is tuned or held off-center, or your release is pulling the string left. A sight adjustment is the quickest fix, but it only works if the other two are not the real cause. Before you touch the sight, confirm that your arrows are not left because of form.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
Factors That Affect Left Groups
Several factors can push your group left, and they behave differently:
- Bow hand torque: Gripping too hard or canting the bow can pull arrows in the direction the bow is twisted.
- Release direction: A release that pulls the string toward your left side sends arrows left.
- Nocking point and arrow spine: A nocking point set too far off, or arrows with the wrong spine, can cause the arrow to fly off-line.
- Sight alignment: A sight mounted off-center or bent can shift your aim without you noticing.
Fix the form and equipment issues first, then adjust the sight. Sight changes can hide a form problem for a while, but the problem will show up again at longer distances.
How to Move the Sight Left
To move your arrows left, shift the sight pin in the opposite direction, to the right. To move your arrows right, shift the sight pin to the left. For a left group, that means moving the sight pin to the left.
- Shoot a group of three to five arrows at a known distance, such as 20 yards.
- Measure how far the group center is from the bullseye.
- Make a small adjustment, about one-quarter inch per correction, in the direction described above.
- Shoot another group and check the center again.
- Repeat until the group is centered, then lock the sight down.
Practical Tips for New Archers
- Adjust in small steps. Large changes overshoot the target and waste arrows.
- Check the sight is level and mounted solidly before you start.
- Shoot from a consistent anchor point, so your results reflect the equipment and not a change in form.
- Record every group with the distance and the adjustment made, so you can see what worked.
If the group stays left after several careful adjustments, have an experienced archery shop or a certified coach look at your form, bow tuning and arrow setup.
What We’d Use
A sight with an easily adjusted windage screw makes left-right corrections quick and repeatable. Look for a model with clearly marked adjustment screws.
A bow square or nocking point tool helps you confirm the arrow is sitting square to the string before you blame the sight. View on Amazon
FAQ
Should I move the sight left or right if my arrows land left?
Move the sight pin to the left. That shifts the aim point so your arrows land further right and closer to center.
How much should I adjust the sight each time?
Start with about one-quarter inch at 20 yards, then shoot a new group and check the result before making another change.
Can a bad release cause a left group even after I adjust the sight?
Yes. If your release pulls the string left, the group will drift left at every distance. Work on your release before relying on sight changes alone.
Related reading
- Trophy Ridge Bow Sight Battery Size: Which Battery to Use (2026)
- Hind Sight Bow Sight: How to Set Up and Use One for Target Shooting
- Adjusting Bow Sight Left and Right: A Step-by-Step Guide for Archers
Ready to choose one?
