We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

3 Pin Bow Sight Distances: How to Set Your Pins for Beginners

Learn how to set 3 pin bow sight distances step by step, from a 20-yard first pin to tuning the second and third pins for accurate beginner shooting.

Updated November 2026

A 3 pin bow sight distances setup means assigning each of the three pins to a specific yardage so you can aim without guessing. Once you finish, you will know how to pick your three marks, sight each one in at the right distance, and use the correct pin for every shot you take. The process takes one practice session and a few dozen arrows.

Before You Start: What You Need

Gather the right tools before you touch the sight. Most setups go smoothly when you have everything within reach at the shooting line.

Shopping for one? See our guide: Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners?.

  • Your bow, fully tuned, with the arrow rest and nock point already set
  • A target or backstop with clear yardage marks at 20, 30, and 40 yards
  • A tape measure or rangefinder to confirm distances
  • A bow square and an Allen wrench set for sight adjustments
  • At least 12 arrows of the same length and spine

Step 1: Choose Your Three Yardages

Most archers set the top pin for their closest distance, the middle pin for the mid-range, and the bottom pin for the longest shot they plan to take. A common starting point for a hunting or target setup is 20, 30, and 40 yards. Pick distances you can realistically shoot with confidence, because a pin set for 60 yards does little good if you only feel steady out to 35.

Keep the spacing even when possible. Even spacing makes it easier to judge where the next pin falls when you shoot at a distance between marks.

Step 2: Sight In the First Pin

Start with your closest distance, typically 20 yards, and shoot three to four arrows from a stable, consistent stance. Group your arrows, then adjust the top pin until the group centers where you aim. Move the pin up or down by small increments and shoot again after each change.

Step 3: Sight In the Second and Third Pins

Move back to your next distance and repeat the process with the middle pin, then do the same for the third pin at the longest range. Each pin needs its own group of arrows. Shoot at each distance enough times to see a consistent group before you adjust.

Some archers find it useful to mark the sight housing or the pin guard with the yardage once it is set. This prevents confusion later, especially during a long session.

Checking Your Work

After setting all three pins, shoot a short round at each distance to confirm your groups hold. If one pin consistently drops or rises, adjust it again rather than shooting around the problem.

Common Mistakes

  • Setting pins at distances you do not practice, so the marks never get used
  • Adjusting a pin after only one or two arrows, which hides the real group
  • Changing your anchor point or draw length between distances
  • Forgetting to recheck pins after a string change, a new arrow, or a nock point shift
  • Estimating yardage by eye instead of measuring the target distance

A reliable rangefinder helps you confirm the exact yardage for each pin, which keeps your settings honest.
View on Amazon

A bow square gives you a quick, consistent reference when you check the sight alignment during tuning.
View on Amazon

FAQ

How far apart should the pins be set?

Many archers space pins about 10 yards apart, such as 20, 30, and 40 yards. Even spacing makes it easier to aim at in-between distances. Choose what fits the distances you actually shoot.

Can I use a 3 pin sight for hunting?

Yes, but confirm your pin distances match the ranges you expect in the field. Hunting conditions vary, so practice from elevated and angled positions too. Check local regulations and hunter education resources for the rules that apply to you.

Why do my pins drift after I set them?

Drift usually comes from changes in your form, a loose sight, or a shift in your nock point or arrow setup. Recheck your tuning first, then reset the affected pin. Consulting a qualified archery pro can help if the problem continues.

Conclusion

Setting 3 pin bow sight distances comes down to picking three realistic yardages, sighting each pin one at a time, and checking your groups. Keep your form consistent and recheck your pins after any equipment change. With regular practice, the three marks become a reliable aiming system.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.