We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Howard Hill Back Quiver Pattern: A Step-by-Step Guide for Beginners

Learn how to read, cut and assemble a howard hill back quiver pattern step by step, with fitting tips and common mistakes to avoid before you start sewing.

Updated November 2026

A howard hill back quiver pattern gives you a template for cutting and assembling a leather quiver that rides high on the back and keeps arrows reachable for fast draws. This guide walks you through choosing a pattern, preparing your materials, cutting the pieces and checking the fit before you commit to final stitching. By the end, you will have a clear plan for building or customizing a quiver that suits your bow and your shooting style.

What the Pattern Includes

Most back quiver patterns, including those based on the style Howard Hill popularized, are made up of a few core pieces: a main body panel that wraps around the arrows, a bottom or base piece, a flap or cover, and a strap or harness system. Some patterns show the body as a single long piece with a fold line, while others separate the front and back. Before you cut anything, confirm which pieces your pattern includes and how many times each one needs to be cut.

Shopping for one? See our guide: Bear Archery Traditional Back Quiver Review (2026).

If you are new to the style, it helps to read through a general overview first. The article Hill Style Back Quiver: How to Choose, Fit and Use One (Step-by-Step) explains the design features that set this quiver apart from other back styles.

Preparing Your Pattern and Materials

Measure your arrows before you trace anything. Record the length and the diameter of the arrow shafts with fletching in place, and add clearance for the broadheads or field points you plan to use. Then compare those numbers to the pattern’s stated dimensions. If the pattern was drawn for a different arrow length, scale or adjust the body panel before cutting.

Use this checklist before you start:

  • The full pattern, printed at 100% scale with no fit-to-page adjustment
  • Vegetable-tanned leather of consistent thickness, usually in a range suited to a sturdy but flexible shell
  • A rotary cutter or sharp utility knife, a metal straightedge and a cutting mat
  • Leather punch or awl, waxed thread and a harness needle
  • Contact cement or a leather-appropriate adhesive for temporary holding
  • A marking tool such as a silver pen or stylus for transferring lines

Cutting and Shaping the Pieces

Transfer the Pattern Accurately

Trace each piece onto the flesh side of the leather, then mark notches, fold lines and stitch lines. Work with the grain of the leather so the body panel bends without cracking when you form the quiver around your arrows.

Cut and Skive the Edges

Cut each piece with steady, even pressure. Skive the edges that will be folded or stitched so the seams lie flat and do not build up bulk. Thin edges make the stitching easier and reduce stress at the corners.

Assembly and Fit Checks

Dry-fit the body panel around a bundle of arrows before you stitch. The quiver should hold the arrows snugly enough that they do not rattle, yet loosely enough that you can draw one out with one hand in a single motion. Check that the top opening sits at a height where you can reach the nock without turning your shoulder awkwardly. Make adjustments to the strap length now, since changing it after stitching is difficult.

Stitch the seams with a saddle stitch if you can, because it stays tight even if one thread breaks. Burnish the edges after stitching to seal the leather and prevent fraying.

Common Mistakes

  • Printing the pattern at a scaled size, which changes every dimension.
  • Cutting before checking arrow length against the body panel.
  • Skipping the dry fit, then finding the strap sits too high or too low.
  • Using leather that is too thin for the load, causing the body to sag.
  • Stitching too tightly near the fold, which can crack the leather over time.

A quality leather-working stitching chisel helps you keep stitch holes evenly spaced, which matters for a clean, strong seam. View on Amazon

A steel metal straightedge gives you a reliable cutting guide that will not bend under a rotary cutter. View on Amazon

Waxed linen thread is the usual choice for hand-stitched leather because the wax helps it hold knots and resist wear. View on Amazon

FAQ

Can I use a howard hill back quiver pattern for a different arrow length?

Yes, but you will need to scale or adjust the body panel to match your arrow length and fletching clearance. Measure your arrows first, then compare them to the pattern’s dimensions before cutting.

What leather works best for this type of quiver?

Vegetable-tanned leather of medium weight is commonly used because it holds its shape and tools well. Check the pattern’s notes for any specific thickness recommendation.

Should I stitch by hand or with a machine?

Hand stitching with a saddle stitch is the traditional method and gives strong, even seams. Heavy-duty machines can work on some leather, but test on scrap first and confirm your machine can handle the thickness. Consult a leather-working instructor if you are unsure.

Conclusion

A howard hill back quiver pattern is a practical starting point if you want a quiver that fits your arrows and your draw. Measure carefully, dry-fit before you stitch, and take your time with the skiving and seams. With a clean cut and solid assembly, you will end up with a quiver that stays out of your way and keeps your arrows ready.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Archery Society.