How to Wear a Back Quiver: A Step-by-Step Guide for Beginners
Learn how to wear a back quiver correctly, with steps for setting the strap height, angle and tension so arrows stay secure and your draw stays clear.
Updated November 2026
Learning how to wear a back quiver comes down to three things: placing it at the right height on your back, angling the arrows so you can reach them without looking, and tightening the straps so the quiver stays still while you shoot. Once it is set up correctly, you can pull an arrow, nock it and return it to the quiver smoothly, with no snagging on your clothing or bow string.
What You Need Before You Start
Gather your quiver, your arrows and a helper if you can get one. Most people find it easier to adjust a quiver with someone standing behind them, because you cannot see your own back. You will also want a mirror or a clear spot on the range where you can check your arm reach.
Shopping for one? See our guide: Bear Archery Traditional Back Quiver Review (2026).
- Your back quiver with its straps and buckles
- Your full set of arrows, with the same length and weight you normally shoot
- Your usual shooting shirt or jacket, since bulk changes the fit
- A helper to check the position from behind
How to Wear a Back Quiver Step by Step
Start by putting the quiver on as you normally would, with the arrows in it. Then work through these adjustments in order, checking after each one. How Do You Wear a Bike Helmet Correctly: A Step-by-Step Fit Guide goes further into this.
- Set the height. The quiver’s top should sit roughly level with your shoulder blades or a little below. If it rides too high, your draw arm can hit the arrow tips. If it sits too low, reaching back becomes awkward.
- Angle the arrows. Tilt the quiver so the arrow tips point slightly outward, toward your draw-side shoulder. This lets your hand find the shafts without twisting your wrist.
- Tighten the waist strap. Snug the belt so the quiver does not swing when you move. It should feel secure, not tight enough to restrict breathing or your back muscles.
- Check the shoulder straps or harness. If your quiver has them, adjust them so the weight is distributed evenly. The quiver should not pull your shoulders forward.
- Test your reach. Without looking, reach back and draw one arrow out. Then return it. Repeat several times at full draw position.
- Shoot a few arrows and recheck. Shooting motion can shift the quiver. Stop after a short session and confirm the height and angle have not drifted.
Checking Clearance at Full Draw
At full draw, your bow arm and string should clear the quiver. Stand sideways and draw an empty bow, then look over your shoulder. If the string or your fingers catch the arrow fletching, the quiver is too high or angled too far toward the bow side.
Common Mistakes to Avoid
- Setting the quiver too high, which causes the draw hand to knock arrows loose
- Leaving the straps loose, so the quiver bounces during the shot
- Angling the arrows too far inward, which makes retrieval slow and awkward
- Fitting the quiver over a heavy jacket, then shooting without a jacket on
- Skipping the clearance check after changing your layers
Recommended Gear
A well-made quiver with adjustable straps makes fitting much easier, because you can make small changes without retying anything. If you are still choosing a quiver, the Leather Archery Back Quiver guide covers the fit points in more depth. For shooting from a horse, a dedicated mounted design is worth a look.
- Adjustable-strap back quiver with a rigid body, which holds its shape and keeps arrows separated. View on Amazon
- Replacement quiver straps or a padded waist belt, which can improve comfort on longer sessions. View on Amazon
For more background on choosing and fitting specific styles, see Traditional Leather Back Quiver: A Step-by-Step Guide for Beginners, Youth Archery Back Quiver: A Step-by-Step Fitting and Setup Guide and Bow and Quiver on Back: How to Carry Both Safely and Comfortably.
FAQ
How high should a back quiver sit?
Most archers set the top of the quiver roughly level with the shoulder blades or slightly below. Adjust from there so your draw hand reaches the arrows without strain.
Should a back quiver be tight?
It should be snug enough that it does not swing or bounce, but not so tight that it restricts breathing or shoulder movement. Check by shooting a few arrows and confirming it stays put.
Why do I keep knocking arrows out of my quiver?
This usually means the quiver is too high or angled too far inward, so your draw hand strikes the shafts. Lower it slightly and tilt the arrow tips a little more toward your draw-side shoulder.
Conclusion
To wear a back quiver well, set the height near your shoulder blades, angle the arrow tips toward your draw side and tighten the straps until the quiver holds still. Confirm your reach and full-draw clearance, then shoot a short session and recheck. Small adjustments made patiently will give you a fit that feels natural.
Related reading
- Mounted Archery Back Quiver: How to Choose and Fit One for Horseback Shooting
- Hill Style Back Quiver: How to Choose, Fit and Use One (Step-by-Step)
- Push Archery Delta Back Pocket Quiver: Fit, Use and Setup Guide
Ready to choose one?
