We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

What Is an IQ Pro Bow Sight and How Do You Set One Up?

Learn what an iq pro bow sight is, how its pins and parts work, and how to set one up and sight it in correctly for accurate target shooting.

Updated November 2026

An iq pro bow sight is a target archery sight that uses a frame mounted to the riser, with one or more pins adjusted to match your draw length and arrow speed. You set it up by mounting it, adjusting the pin housing, and sighting in at known distances until your arrows group where you aim. The process is simple, but it rewards patience and a consistent shot.

Why the iq pro bow sight needs careful setup

A bow sight does not correct a bad shot. It gives you a fixed reference point, and that reference only works if the bow, the sight and your anchor point stay the same from shot to shot. Most accuracy problems with a new sight come from a loose mount, a sight that is not level, or a changing anchor, not from the sight itself.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Before you touch the pins, confirm that your bow is tuned. A bow that shoots arrows at different angles will scatter groups no matter how the sight is set. If you are unsure, read the guide on Peep Sight on Bow Keeps Twisting? How to Fix It Step by Step to rule out a rotating peep, which causes the same drift.

Key factors when you sight in

Three things control how the sight behaves:

  • Draw length and anchor. Your anchor must be identical every time. Mark your string with a nock or a kisser button so you can check it.
  • Sight level. A sight tilted to one side will shift groups left or right at longer distances. Check it with a bubble level or a plumb line.
  • Pin spacing and distance markings. Pins are usually set for fixed distances such as 20, 30, 40 and 50 yards. Your numbers depend on your arrow speed and your bow’s specifications, so record them rather than trusting a generic chart.

If you are comparing sight styles before you commit, the overview Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners? explains how pin count changes your adjustment routine.

Steps to sight in your iq pro bow sight

  1. Mount the sight to the riser at the height your arrows fly straight, following the sight’s instructions for bracket position.
  2. Level the sight so the pin housing sits square to the arrow path.
  3. Shoot a group at 10 yards, adjusting the first pin until arrows land in a tight cluster at the aim point.
  4. Move to 20 yards and repeat, then continue to your longer distances, marking each pin once it is set.
  5. Confirm your anchor and release at every distance. Small changes here will throw off the whole setting.
  6. Recheck after a few sessions. Temperature, string stretch and loose screws all shift the setting over time.

If your pins will not hold, a worn or loose part is often the cause. Guides such as Truglo Bow Sight Replacement Parts: What to Buy and How to Swap Them describe which components wear out and how to replace them without restarting your whole setup.

What we’d use

A sight level makes the leveling step faster and more reliable, which matters most when you first set the frame.

View on Amazon

A stable mounting tool or a bow stand helps keep the bow still while you adjust pins between groups.

View on Amazon

FAQ

Do I need to level an iq pro bow sight?

Yes. A sight that is not level will drift groups sideways at longer distances, even when your form is good. Check level before each sighting session.

How often should I recheck my pin settings?

Recheck after changing your draw length, arrows or string, and after a few weeks of regular shooting. Consult a qualified archery shop or coach if your groups shift without a clear cause.

Can a beginner set up an iq pro bow sight alone?

Yes, with a steady routine and a second person to watch your groups if possible. Take it slowly, shoot short sessions, and ask a coach to review your form if the setting still will not hold.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.