Fiber Optic Bow Sight Pins: How to Choose and Set Them Up (Step-by-Step)
Learn how fiber optic bow sight pins work, how to pick the right size and color, and how to set and adjust them for accurate shooting at every distance.
Updated November 2026
Fiber optic bow sight pins use a strand of light-gathering fiber at the tip of each pin to make your aiming point glow in low light. By the end of this guide, you will know how to choose the right pin material and size, set your sight for your draw length, and adjust the pins so each one is zeroed at its marked distance.
How Fiber Optic Pins Work
A fiber optic pin is a thin rod, usually metal or composite, with a short fiber strand housed in its tip. The fiber collects ambient light and carries it to the front of the pin, so the tip appears bright against the target. Many sights include a sight window or a built-in light gathering bulb that makes the fiber more visible at dawn and dusk. Bright daylight shows the fiber clearly, while a dim field or a shaded wooded lane still leaves a visible dot.
Choosing the Right Pins for Your Bow
Start with the pin diameter and the fiber color. Thinner pins cover less of the target face and are easier to read at longer distances, while thicker pins are easier to find quickly at close range. Most manufacturers offer a range of fiber colors, and bright green and red are common choices because they stand out against most backgrounds. Check that the sight you buy accepts your pin count, since some sights support five pins and others support seven or more.
Setting Up and Adjusting the Pins
- Mount the sight so the pin housing sits level with the arrow path, then confirm the sight bar is square to the riser.
- Set your draw length and anchor point, and shoot a group at 20 yards to establish a baseline for your sight.
- Move the top pin until your arrows strike the center of the target. Lock the adjustment screw once the group is centered.
- Repeat at each marked distance, such as 30, 40 and 50 yards, adjusting each pin in turn until the group sits in the center at every distance.
- Recheck the sight after the first few sessions, since string stretch and cam timing can shift the zero slightly.
Tools You Will Need
- An Allen wrench set matched to your sight
- A marked target or a field range with measured distances
- A bow square or a level for checking the sight bar
- A pencil and notepad to record each pin setting
Sight Pin Setting Reference
| Step | What to check | Typical result |
|---|---|---|
| Level sight | Bubble or bar square to riser | Arrows fly straight across the target face |
| 20-yard zero | Group centered on bullseye | Baseline for the top pin |
| Longer distances | Each pin set at its marked yardage | Groups stay centered at every distance |
Common Mistakes
- Setting pins without a consistent anchor point, which moves your zero every time you shoot.
- Using a pin size that is too thick for the distances you shoot most often.
- Skipping the level check, which causes every pin to shift off target.
- Ignoring a loose adjustment screw, which can let a pin drift during a session.
Recommended Gear
A quality bow square helps you check the sight bar against the riser before you start adjusting pins. View on Amazon
A small Allen wrench set matched to your sight keeps you from stripping the adjustment screws during fine tuning. View on Amazon
If your sight pins are part of a larger setup decision, Bow Sights with Rangefinder: 5 Best Picks Compared (2026) covers how pin sights compare with rangefinder designs. If your arrows keep missing even after the sight is set, Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes walks through the common causes.
FAQ
Do fiber optic pins work in complete darkness?
No. Fiber optic pins need some ambient light to glow, so they are most visible at dawn, dusk and in shaded areas. In total darkness you will need a separate light source.
How often should I recheck my pin settings?
Recheck after the first few sessions and any time you change arrows, string or draw length. String stretch and cam timing can shift the zero over time.
Can I replace the fiber strand myself?
Many sights allow fiber replacement, but the process varies by manufacturer. Check the sight’s instructions or consult a qualified archery technician before attempting it.
Conclusion
Fiber optic bow sight pins give you a bright aiming point in changing light, and they are straightforward to set once you have a consistent anchor and a level sight. Work through each distance in order, record your settings, and recheck after any change to your bow. With a steady routine, your pins will stay zeroed and your groups will stay tight.
Related reading
Ready to choose one?
