Single Pin Dial Bow Sight: How to Set Up and Sight In for Beginners
Learn how a single pin dial bow sight works, how to set it up, and how to sight in your compound bow at several distances with this beginner-friendly guide.
Updated November 2026
A single pin dial bow sight lets you aim at any distance by turning a dial that moves one pin up or down, so you do not need to hold over or under a fixed set of pins. This guide explains how the sight works, how to set it up on your bow, and how to sight it in at several yardages so you can shoot accurately from the first arrow to the last.
How a Single Pin Dial Bow Sight Works
A single pin dial bow sight uses one pin housed in a slide. Turning the dial moves that pin vertically along a scale, and each mark on the scale corresponds to a distance you have set during sighting. Most models use a fine-adjustment knob for windage and a separate elevation or dial mechanism, though the exact design varies by manufacturer. Check your sight’s manual for the specific adjustments it offers.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
The main advantage is simplicity. You aim the same way every time, and the dial handles the arc of the arrow. The trade-off is that you must set and remember your distance marks accurately, which takes some time at the range.
Step-by-Step Setup and Sight-In
Before you start, make sure your bow is tuned. A sight can only be as accurate as the arrow flight underneath it. If your arrows are not grouping well at close range, read Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes to rule out tuning and form problems first.
- Mount the sight so the sight window lines up with your eye at full draw. Tighten the mounting screws only enough to hold it firmly.
- Set the sight to its closest distance mark, usually 10 or 20 yards depending on the model.
- Shoot a group of at least three arrows from a stable stance, using the same anchor point and release each time.
- Adjust the pin vertically until the group centers on the target. Adjust windage with the side knob if the group drifts left or right.
- Move to your next distance mark, such as 30 yards, and repeat steps 3 and 4 until all your marks are set.
- Recheck your closest distance once more to confirm nothing shifted during the process.
Factors That Affect Your Sight Marks
Your sight marks depend on several factors, and changing any one of them usually means re-sighting. Draw length, draw weight, arrow weight, and the point weight all affect arrow speed and trajectory. Temperature and altitude also shift arrow flight slightly, so owners often report needing minor adjustments between cold morning sessions and warm afternoons.
| Change | Effect on Sight Marks |
|---|---|
| New arrows or different point weight | Full re-sight required |
| Draw weight adjustment | Re-check all distance marks |
| Large temperature change | Verify at one or two distances |
| Sight moved or remounted | Full re-sight required |
Common Mistakes to Avoid
- Sighting in with a loose anchor or inconsistent release, which makes the pin appear to drift.
- Setting marks at a single distance and assuming the rest will work.
- Ignoring a bow that is out of tune, which no sight can correct.
- Forgetting to tighten the sight mounting screws after adjustments.
- Shooting from an unstable stance during sighting, which spreads your groups.
Recommended Gear
A sturdy bow sight level helps you confirm the sight sits square to the bow, which keeps your marks consistent. View on Amazon
A target with clearly marked yardage rings lets you measure groups accurately as you work through each distance. View on Amazon
Spare arrows of the same weight and spine make it easier to build reliable groups without changing variables. View on Amazon
FAQ
How many distance marks should I set on a single pin dial bow sight?
Most archers set three to five marks, such as 20, 30, 40, and 50 yards, depending on the distances they expect to shoot. Start with the distances you hunt or compete at most often.
How often should I re-sight my single pin dial bow sight?
Re-check your marks at the start of each season and any time you change arrows, draw weight, or equipment. A quick check at one distance before a session catches most small shifts.
Can I use a single pin dial bow sight for hunting?
Yes, many hunters use these sights, but practice at realistic distances and angles is essential. Check your local regulations and consult an experienced instructor if you are new to hunting.
Conclusion
A single pin dial bow sight is straightforward once you understand how the dial and pin work together. Take your time sighting in at each distance, and recheck your marks whenever your setup changes. With consistent form and a tuned bow, the dial will keep your arrows on target.
Related reading
- Trophy Ridge Bow Sight Battery Size: Which Battery to Use (2026)
- Hind Sight Bow Sight: How to Set Up and Use One for Target Shooting
- Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide
- E Z V Bow Sight: What It Is, How It Works and How to Set It Up
- Bow Sight Without Peep: Setup Steps for Accurate Shots (2026)
Ready to choose one?
