We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Bow Sight Pin Adjustment: A Step-by-Step Guide for Beginners

Learn bow sight pin adjustment step by step: set up a level sight, tune each pin at set distances, and fix common mistakes for tighter groups.

Updated November 2026

Bow sight pin adjustment is the process of setting each pin in your sight so it lands where your arrow lands at a known distance. Once it is done right, you can aim at a target and trust that the pin matches your arrow’s flight. This guide covers the setup you need, how to sight in one pin at a time, and how to check your work.

Before You Adjust Anything

Pin adjustment only works if the rest of your setup is stable. A sight that is loose, tilted or mounted on a bow with inconsistent anchor points will never group tightly, no matter how carefully you turn the adjustment screws. Check these basics first:

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Step-by-Step Pin Sighting Process

Start with your longest pin or the distance you shoot most often, then work toward your closer pins. Adjusting one pin at a time keeps the process simple.

  1. Set up a target at a measured distance, such as 20 yards, and verify the distance with a tape.
  2. Shoot three to five arrows from a rested, consistent position, aiming at the same spot each time.
  3. Find the center of the group, not the single arrow that looks best.
  4. Move the pin in the direction of the group. Adjust the pin screw or housing so the pin sits on the group center.
  5. Shoot another group to confirm the change before moving to the next distance.
  6. Repeat for each distance: for example 20, 30 and 40 yards.

Reading Your Groups and Making Corrections

The direction your arrows land tells you which way to move the pin. If arrows land low, raise the pin. If they land high, lower it. Left and right corrections work the same way with windage adjustments. Make small changes, usually a quarter turn at a time, and retest after each one. Large moves often overshoot, and then you spend time chasing the sight.

Checking Your Work

After all pins are set, shoot a short session at a mix of distances. A correctly adjusted sight produces groups that stay within a few inches of each other at each pin distance. If one distance drifts, recheck that pin before changing the others.

Common Mistakes

  • Adjusting pins while the bow is not consistently held or anchored.
  • Using a single arrow to make a change instead of a group.
  • Making large adjustments that overshoot the target spot.
  • Shooting from unmeasured distances, which throws off the whole setup.
  • Skipping a retest after each change.

A bubble level helps you confirm the sight is square before you start, which prevents small tilts from showing up as false errors downrange.

A measuring tape or laser rangefinder lets you verify exact distances, which matters because a few yards of error will misalign every pin. View on Amazon View on Amazon

A target with a clear aiming spot, such as a bullseye face, makes group centers easier to read. View on Amazon

FAQ

How often should I adjust my bow sight pins?

Check them whenever you change equipment, such as a new string, arrows or sight, and after any drop in performance. Many archers also recheck pins at the start of each season.

Why do my arrows group well but land off-target?

A tight group that lands off-center means the pin is misaligned, not the shooting form. Move the pin toward the group center, then retest.

Should I adjust pins at close range first?

Most archers start with their longest distance, because that setup affects the others. Close pins are easier to set once the longer ones are stable.

Conclusion

Bow sight pin adjustment is repeatable once your bow is set up and your form is consistent. Work one pin at a time, read your groups from the center, and retest after every change. Check the official manual for your sight model if you need model-specific instructions.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.