We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Redline Torch Bow Sight: Setup and Sight-In Guide for Beginners

Learn how to mount, sight in and use a redline torch bow sight, with clear steps for pin alignment, distance marks and common beginner mistakes.

Updated November 2026

A redline torch bow sight is a fiber-optic style pin sight that lets you aim at fixed distances with a visible red dot or pin. This guide walks you through mounting the sight, setting your pins at known distances and checking your work so your groups tighten up. You will need basic hand tools, a stable target and a few arrows you can shoot consistently.

What You Need Before You Start

Before you mount anything, confirm your bow is set up correctly. A sight is only as accurate as the bow it sits on, and a poorly tuned bow will throw shots no matter how carefully you aim.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

  • Your bow, with a stable, well-tuned arrow rest and a consistent release or grip
  • The sight bracket that matches your bow’s riser mounting holes
  • An Allen wrench set in the sizes your sight and bracket require
  • A target at 20 yards and a backstop you can shoot into safely
  • Three to six arrows of the same length, spine and point weight

Check the manufacturer’s instructions for your model. Torque specifications and pin adjustment ranges vary, so follow the numbers in the included manual rather than guessing.

How to Mount the Redline Torch Bow Sight

Mounting is straightforward, but a loose bracket will cause your pins to drift over a session. Work in a clean area and keep all screws in a dish so none get lost.

  1. Attach the bracket to the riser using the mounting holes that give you the sight height and clearance you want.
  2. Thread the sight onto the bracket and leave the screws finger-tight at first.
  3. Position the sight so the pin guard does not touch your bow hand or the string path when drawn.
  4. Tighten all fasteners evenly to the torque listed in the manual. Recheck them after your first few shooting sessions.

Setting Your Pins at Known Distances

Pin sights are sighted in one distance at a time. Start at 20 yards, then add the rest of your marks once that group is consistent.

Sighting In at 20 Yards

  1. Shoot three arrows at a 20-yard target using your normal form, aiming at a small spot.
  2. Measure where the group sits relative to the spot. If it is left, move the sight so the 20-yard pin moves left, and repeat until the group centers.
  3. Adjust the vertical position the same way so your group lands on the spot at full draw.

Adding Further Distances

Once 20 yards is locked in, shoot at 30 and 40 yards and set each pin in turn. Keep the same anchor point and release every time. Changes in anchor are the most common reason pins appear to drift.

Checking Your Groups and Keeping Them Consistent

Good sight setup shows up as tight groups over many shots, not one lucky arrow. Shoot in sets of three, pause between sets, and track where each group lands. Re-check your pin positions after any change to your draw length, string, rest or sight height.

Distance What to Check Typical Fix
20 yards Group centered on spot Adjust the 20-yard pin
30 yards Group sits in same vertical line Adjust the 30-yard pin
40 yards Group consistent over three sets Confirm anchor and release first

If your groups scatter, the problem is usually form rather than the sight. Our guide on Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes covers the common causes, and Compound Bow Arrow Rest Adjustment: A Step-by-Step Guide for Beginners explains how rest position affects grouping.

Common Mistakes

  • Sighting in with an inconsistent anchor or release, which makes every pin move.
  • Tightening the bracket unevenly, causing the sight to shift during the session.
  • Trying to set all distances in one session when one distance is still unstable.
  • Ignoring a worn or loose rest, which sends arrows off in ways the sight cannot correct.
  • Forgetting to recheck screws after the first few shooting sessions.

A stable target and a reliable arrow rest make pin sight setup much easier. Look for a bag target that stops arrows cleanly and a rest that holds the arrow in the same spot every shot.

  • A bag target for safe, repeatable sight-in sessions View on Amazon
  • A replacement drop-away or containment rest if your current one wears unevenly View on Amazon
  • A hex key set that covers the sizes your sight and bracket use View on Amazon

FAQ

Do I need to re-sight my redline torch bow sight after changing arrows?

Yes. A change in arrow weight, length or point weight alters your arrow’s flight path, so your pins may no longer line up. Re-check the 20-yard pin first, then the others.

How often should I check my sight’s mounting screws?

Check them after your first few sessions and then periodically, especially after heavy use or transport. Loose screws are a common cause of sudden pin shifts.

Can I use the sight without setting every distance?

You can, but you will only be accurate at the distances you have set. Shoot at known distances during practice so you know which pin to use in the field or on the course.

Conclusion

With the sight mounted securely and your 20-yard pin centered, adding the remaining distances becomes a routine task. Keep your anchor and release consistent, and recheck your setup whenever your equipment changes. For manufacturer-specific torque values and pin ranges, consult the instructions included with your sight, and ask a certified archery instructor if you are unsure about setup.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.