Xero A1i Pro Bow Sight: Setup, Pin Tuning and Tips for New Archers
Learn how to set up, sight in and tune the xero a1i pro bow sight for accurate shooting. Clear steps, common mistakes and practical tips for new archers.
Updated November 2026
The xero a1i pro bow sight is a single-pin sight designed to be mounted on a compound or other bow, and getting it accurate comes down to three things: a solid mount, a square and steady setup, and methodical sight-in at a few set distances. This guide walks you through the process so you can move from an unsorted sight to consistent groups on the target.
Before You Start: Mount and Check the Basics
Sight tuning is only as good as the bow it sits on. Before you touch the pin, confirm that the bow itself is shooting cleanly and that the sight is attached firmly.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
- Tighten the mounting bolts with a hex key, then check them again after your first few shots. Loose hardware is one of the most common causes of wandering groups.
- Confirm the sight is level with the string plane. A sight that is canted will push your groups to one side even when your form is perfect.
- Set your draw length and peak weight to your correct specifications. Sight settings will not hold if your draw changes from shot to shot.
- Check that your arrow rest and nock point are set up correctly, since a poor rest setup can look like a sight problem.
How to Sight In the xero a1i Pro at Set Distances
Start close and work outward. Shooting at a short distance first lets you confirm that the pin and your anchor are repeatable before you commit to longer shots.
- Set up a target at 10 yards on a stable backdrop. Use a face with a clear aiming point.
- Shoot three arrows, using the same anchor, release and follow-through each time. Do not adjust the sight between shots.
- Look at the group, not the single best arrow. If the group sits high or low, move the pin in the direction of the group’s center.
- Make small adjustments and shoot another three-arrow group. Repeat until the group centers on the aiming point.
- Mark the pin setting for 10 yards. Then move to 20, 30 and any other distance you plan to shoot, repeating the same process at each.
Tracking Your Pin Settings
Write down each distance and the matching pin position. A simple reference table saves you from repeating the work every time you shoot.
| Distance | Pin Position Noted | Group Result |
|---|---|---|
| 10 yards | Record your setting | Centered or adjusted |
| 20 yards | Record your setting | Centered or adjusted |
| 30 yards | Record your setting | Centered or adjusted |
Checking Consistency and Making Fine Adjustments
Once your pins are set, the real test is repeatability. Shoot a few groups at each distance on different days. If the group moves, the cause is usually your shooting form, not the sight.
Many shooters find that a sight problem and a form problem look identical on the target. Before changing the sight again, check your anchor point, your grip and your release. If you want more help diagnosing groups, the guide Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes covers common causes in detail.
When you need to refine the rest of your setup as well, Compound Bow Arrow Rest Adjustment: A Step-by-Step Guide for Beginners explains how rest height and centering affect arrow flight.
Common Mistakes to Avoid
- Adjusting the pin after every single arrow instead of judging the whole group.
- Sighting in with a sight that is loose on the bow.
- Changing draw length or anchor point partway through sight-in.
- Skipping the close-range check and jumping straight to long distances.
- Ignoring form problems, such as torque in the grip, and blaming the sight.
Recommended Gear
A few supporting items make sight-in faster and more accurate.
- Hex key set: Lets you tighten mounts and check hardware between sessions. View on Amazon
- Bow level: Helps you confirm the sight sits true to the string plane. View on Amazon
- Stable target stand: Gives you a steady, repeatable aiming point at every distance. View on Amazon
FAQ
How many arrows should I shoot per adjustment?
Shoot at least three arrows before making a change. This shows you where the group is rather than reacting to one shot.
Should I sight in at 20 or 30 yards first?
Start at 10 yards to confirm form, then move outward in steps. Starting close keeps mistakes small and easy to correct.
Can I use the xero a1i Pro without a rangefinder?
Yes. You can mark pin positions at known distances and use those marks when you shoot. If you want distance measurement, the guide Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide covers a different approach.
Conclusion
Mount the xero a1i pro bow sight securely, sight it in at 10 yards, and build outward while logging each setting. Check your form whenever groups drift, since the sight is rarely the only variable. Consult a qualified archery coach or pro shop if you keep struggling with consistency.
Related reading
- Traditional Bow Arrow Rest: 7 Best Picks Compared for 2026
- Top 7 Archery Bow Arrow Rest Options Compared for Recurve and Compound Bows
Ready to choose one?
