How to Adjust Arrow Rest on Compound Bow: A Step-by-Step Guide
Learn how to adjust arrow rest on compound bow with clear steps for height, centershot and tension so your arrows fly straight and true every time.
Updated November 2026
To adjust an arrow rest on a compound bow, you set its height so the arrow sits level with the center of the nock, then move it sideways for centershot and tune its tension so the arrow leaves the string cleanly. Once these three settings line up, your arrows should fly straight and group tightly at the target. The whole process takes about 20 to 30 minutes if you work methodically.
Before You Start: Tools and Setup
Work from a stable setup. Most archers use a bow press or a sturdy stand, though a bow mounted in a rack works too. Check that your bow is strung correctly, that the cams are timed, and that the rest is secured to the riser with its mounting screws snug but not overtightened.
Shopping for one? See our guide: Arrow Rest for Compound Bow: 6 Best Picks Compared (2026).
- Hex or Allen keys for the rest’s adjustment screws
- A bow square or ruler to measure height
- A cut arrow of the correct length and spine
- A paper tuning kit or a tall target for checking results
- A nock-set tool or a small piece of tape to mark your nocking point
Step 1: Set the Rest Height
Nock an arrow and draw the bow to your normal anchor. Measure from the center of the nock to the arrow’s shaft position on the rest, then adjust the rest so the arrow sits level. Most manufacturers recommend starting with the arrow perpendicular to the riser, with the shaft parallel to the string at rest. Lock the height screw once you have a clean reference point.
Step 2: Adjust Centershot
Centershot determines how the arrow lines up with the center of the bow. Shoot a few arrows at a target about 10 to 15 yards away and watch where they land. If they hit left of your aim point with a right-handed bow, move the rest toward the center of the riser slightly. Make small changes of about one-eighth of an inch at a time, shooting groups after each adjustment.
Step 3: Tune Rest Tension and Fine Position
Rest tension controls how firmly the arrow sits and how it releases from the rest. Too much tension can cause the arrow to hop or drag, while too little lets it wobble. Many drop-away and launcher-style rests include a tension screw or spring. Tune in small increments, then shoot paper or a bare shaft test to confirm the arrow leaves cleanly.
Quick Paper Tuning Check
Shoot an arrow through a sheet of paper stretched across a frame at about three feet. If the tear shows a clean hole with the fletching cutting through the center, the arrow is flying straight. If the tear looks like a fish tail, the arrow is out of tune, usually due to rest position or nock height.
Common Mistakes
- Adjusting height and centershot at the same time, which makes it hard to know which change helped.
- Overtightening rest screws, which can strip threads or shift the rest during shooting.
- Ignoring arrow spine. An arrow that is too stiff or too weak will not tune properly regardless of rest settings.
- Making large adjustments instead of small increments.
- Skipping a recheck after changing your draw length or peep sight.
Recommended Gear
- Bow press: A stable press makes it easier to remove and reinstall the string while you make adjustments. View on Amazon
- Paper tuning kit: A tuning frame and paper make arrow flight easy to read. View on Amazon
- Bow square: A square helps you measure rest height and nock position consistently. View on Amazon
For detailed setup walkthroughs on specific rest styles, see Compound Bow Arrow Rest Adjustment: A Step-by-Step Guide for Beginners and Ripcord Ratchet Arrow Rest: How It Works, Setup Steps and Tips. If you are comparing rest types before you buy, Compound Bow Arrow Rest Types: 5 Best Picks Compared (2026) covers the main designs, and Drop Away Arrow Rest for Compound Bow: 7 Best Picks Compared (2026) looks at drop-away options in more depth.
FAQ
How often should I check my arrow rest adjustment?
Check it whenever you change arrows, string, draw length or peep sight, and at least once a month if you shoot regularly. Vibration and temperature can slowly shift screws over time.
Can I adjust the rest without a bow press?
Yes, but a press makes it safer and easier to remove the string. If you work without one, keep the bow stable and avoid bending the limbs more than necessary.
Why do my arrows still fish-tail after adjusting the rest?
Fish-tailing often points to nock height, arrow spine or the rest not being centered. Check each of these before making further changes to the rest. If problems continue, consider consulting a qualified archery pro shop technician.
Conclusion
Adjusting an arrow rest on a compound bow comes down to three steps: set height, dial in centershot and tune tension. Work in small increments, change one setting at a time and confirm each change with paper tuning or group shooting. With these habits, your arrows should fly cleanly and consistently.
Related reading
Ready to choose one?
