We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Full Containment Arrow Rest: How It Works and How to Set One Up

Learn what a full containment arrow rest is, how it holds your arrow, and the setup and tuning steps that make it shoot consistently for target archers.

Updated November 2026

A full containment arrow rest holds the arrow on all sides, so it stays in place from the moment you draw until the arrow leaves the bow. This guide explains how the design works, how to set one up on your bow, and what to check so it performs well on the target range. Most of the work is in the initial setup and a few simple checks each time you shoot.

How a Full Containment Rest Holds the Arrow

Unlike a simple drop-away or a flipper, a full containment rest uses a cradle or sleeve that wraps around the shaft. The arrow sits inside the cradle rather than resting on a single point or blade. Because the arrow is supported around its circumference, it stays centered and does not wobble or drop off the rest during the draw. Many archers choose this style for consistency in the first few shots of a session, when a loose arrow can lead to inconsistent groups.

Shopping for one? See our guide: Arrow Rest for Compound Bow: 6 Best Picks Compared (2026).

Setting Up a Full Containment Rest Step by Step

  1. Mount the rest on the riser at the height your fletching clears it. Start with the rest centered on the arrow path at the manufacturer’s suggested position.
  2. Set the cradle so the arrow sits level with the shelf. Shoot a few arrows and check that they leave the rest without contacting it.
  3. Adjust the cradle tension or pressure, following the manual, so the arrow stays seated but still releases cleanly at full draw.
  4. Set the centershot by moving the rest left or right until the arrow lines up with the bow’s center. Shoot at a close target and check group placement.
  5. Check nock travel and paper-tune or bare-shaft tune to confirm the arrow leaves straight.

Checking Clearance at Full Draw

At full draw, look for the fletching to clear the cradle by a small margin. If the fletching touches the rest, the arrow can veer or the fletching can wear. Raising the rest slightly or changing the fletch height usually fixes this. Recheck clearance any time you change arrows or string length.

Tuning Tips for Consistent Groups

Once the rest is mounted, tune it with the same arrows you plan to shoot. Start with a bare shaft test at 10 to 15 yards. If the bare shaft lands to one side of your fletched arrows, adjust the rest or the nock point until the two groups overlap. Small changes of a few millimeters can make a visible difference, so adjust in small steps and shoot a full group after each change.

If you are new to tuning, the general overview in What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained explains how rests fit into the wider equipment picture. For a step-by-step look at mounting a cradle-style rest, Whisker Biscuit Arrow Rest Installation: A Step-by-Step Guide walks through the process on a similar design.

Common Mistakes to Avoid

  • Setting cradle tension too tight, which can make the arrow hard to release and cause a fling or inconsistent shot.
  • Skipping the centershot adjustment and relying on the default position.
  • Ignoring fletching contact at full draw, which can damage fletching over time.
  • Changing arrows without rechecking clearance and tune.
  • Overlooking worn parts. Inspect the cradle and mounting hardware regularly.

A full containment rest fits many compound bows, and the right model depends on your bow’s mounting pattern and your shooting style. Browse the options below to compare designs.

  • Trophy Ridge Whisker Biscuit: a cradle-style rest that many archers use for its full arrow support. View on Amazon
  • QAD Ultrarest Integrate MX2: a containment-style rest that includes adjustable tension and centershot features. View on Amazon

For a broader look at models in this category, see Quality Archery Arrow Rests: 7 Best Picks Compared (2026).

FAQ

Is a full containment rest better for beginners?

Many beginners find it easier to keep arrows on the rest during the draw because the arrow is fully supported. It still requires proper tuning to deliver consistent groups.

How often should I check the setup?

Check clearance, tension and centershot after any change to arrows, string or sight, and do a quick bare-shaft check at least once a month of regular shooting.

Can I use a full containment rest on a recurve?

Recurve setups usually use shelf-style or launcher rests, so a containment cradle is less common. Check your bow’s mounting options before buying.

Conclusion

A full containment arrow rest keeps the arrow secure from draw to release, which helps consistency at the target. Set it up with careful clearance and centershot checks, then tune with bare-shaft and fletched groups. Consult a qualified archery pro shop if you are unsure about mounting or tuning.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.