We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Trophy Ridge React V5 Bow Sight: Setup, Pin Tuning and Tips for Beginners

Learn how to set up a Trophy Ridge React V5 bow sight, tune your pins and sight in at 20, 30 and 40 yards, and avoid the mistakes that cost accuracy.

Updated November 2026

A Trophy Ridge React V5 bow sight is a multi-pin sight that lets you aim at several fixed distances without changing your anchor point. This guide walks you through mounting the sight, setting your pins, and checking your sight-in so your arrows land where you aim. Plan on an hour or so for the full process, plus follow-up practice.

Before You Mount the Sight

Start by confirming the sight fits your bow. Most sights in this class attach to a standard sight bracket, so check your bow’s mounting holes and riser design against the manufacturer’s listed compatibility. Your bow should also be set to its draw length and draw weight, and your arrow rest should already be installed and centered. A sight can’t correct a poorly tuned bow, so tuning comes first.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

You’ll need a few basic tools: an Allen wrench set, a bow square, a target, and a tape measure. A bow press is helpful but not required.

Mounting and Aligning the Sight

  1. Attach the sight bracket to your bow using the included hardware. Snug the bolts but don’t fully torque them yet.
  2. Mount the sight housing to the bracket. Leave the windage and elevation adjustments loose enough to move.
  3. Check that the sight sits directly over the arrow path. From behind the bow, the sight pin should line up with the center of your string and arrow.
  4. Tighten all fasteners once the alignment looks right.

Setting Vertical and Horizontal Position

Use the sight’s elevation and windage adjustments to center the pin on your target at a short distance, such as 10 yards. Your goal at this stage is rough alignment, not precision. Fine-tuning happens during sight-in.

Setting Your Pins for Distance

The React V5 uses multiple pins set to specific yardages. Sight in each pin separately, starting with the shortest distance and working outward. Shoot a group of at least three arrows at each distance, then adjust the pin until your group centers on the aiming point.

Step Distance Goal
1 20 yards Center your group on the bullseye
2 30 yards Adjust the second pin to center your group
3 40 yards Repeat and confirm the third pin
4 All distances Shoot a final group at each pin to verify

Checking Your Groups

Tight groups matter more than hitting dead center on the first try. If your arrows scatter, the problem is usually form or bow tuning, not the sight. Review your shot sequence and check the arrow rest setup before changing pin settings. For help diagnosing scatter, see Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes.

Common Mistakes to Avoid

  • Sighting in before the bow is tuned. Fix the arrow rest and nock height first.
  • Changing your anchor point or draw length between sight-in sessions.
  • Adjusting several pins at once instead of one at a time.
  • Skipping the verification shots at each distance after making changes.
  • Tightening bolts so hard that the sight shifts or the threads strip.

A bow square helps you confirm that the sight and string sit in the right plane. View on Amazon

A bow press makes it easier to remove and reinstall accessories without stressing the limbs. View on Amazon

A sturdy target with clear distance markings lets you sight in each pin accurately and log your results. View on Amazon

FAQ

Do I need a bow press to set up a Trophy Ridge React V5 bow sight?

No, a bow press is not required for basic mounting and sight-in. It does make removing and reinstalling accessories safer and easier, so many archers find it worth having.

How far should I sight in each pin?

Sight in each pin at the distance it is labeled for, starting with the shortest and working outward. Shoot at least three arrows per distance and adjust until the group centers on your aiming point.

Why do my arrows still miss after sighting in?

Inconsistent form, a loose sight bracket, or an untuned arrow rest are the most common causes. Recheck your bow setup and shooting sequence before changing pin settings again. Manufacturer instructions for your specific sight give the exact adjustment steps.

Conclusion

With the sight mounted square, your bow tuned, and each pin sighted in at its distance, your arrows should group consistently at the ranges you shoot most. Revisit your settings after changes in equipment, draw length, or season-long wear. Practice regularly so your form stays steady enough for the sight to do its job.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.