We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Second Sight Bow AC Odyssey: Setup, Pin Tuning and Tips for Beginners

Learn how to set up and sight in a second sight bow AC Odyssey, with mounting steps, pin tuning basics and common beginner mistakes to avoid.

Updated November 2026

A second sight bow AC Odyssey is a pin sight designed to help you aim consistently at distance. This guide walks you through mounting the sight, setting a rough sight-in at a known distance, and fine-tuning each pin so your arrows group where you aim. Exact features vary by model, so compare your sight’s instructions with the steps below.

What You Need Before You Start

Gather the tools and gear before you touch the bow. Having everything ready keeps the process short and reduces the chance of stripping a screw or bending a bracket.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

  • A hex or Allen key set that matches the sight’s mounting hardware
  • Your bow, with the riser and arrow rest already installed
  • A target stand or bag target and a backstop
  • Marked distances, such as 10, 20, 30 and 40 yards, measured with a tape or rangefinder
  • Arrows matched to your draw length and bow weight
  • Thread-locking compound, if the manufacturer recommends it for the mounting screws

How to Mount the Sight Correctly

Mount the sight on the riser’s sight bracket or mounting holes. Most sights use a dovetail or a set of bolts, so check which system your model uses before you begin.

  1. Position the sight so the pin housing sits roughly in line with your string when you draw to anchor.
  2. Snug the mounting screws by hand first, then tighten them evenly with the key. Over-tightening can crack the housing or strip threads.
  3. Check that the sight body sits level and does not rock. A tilted sight can push your groups off-center at longer distances.
  4. Confirm that the sight does not touch the string or cables at full draw.

Sighting In Your Pins

Start at a short distance and work outward. Sighting in at 10 or 20 yards gives you a solid base before you move to longer ranges.

Step 1: Set a Starting Point

Shoot three to five arrows at the first distance while aiming at the center of the target. Look at where the group lands, not at a single arrow. Adjust the windage and elevation screws until the group centers on your aiming point.

Step 2: Set Each Pin

Move to the next marked distance and set one pin at a time. Aim with the pin you are adjusting, shoot a small group, and move the pin up or down until the arrows land where you aimed. Mark each pin with a label or a dot of paint so you can identify it quickly at the range.

Step 3: Verify at Every Distance

Shoot a group at each pin distance and confirm the arrows land on the aiming point. Small changes in draw length, anchor point or release can shift your groups, so re-check after any equipment change.

Common Mistakes and Tips

  • Adjusting pins based on one or two arrows. Use groups of at least three arrows.
  • Changing your anchor or release between sessions. Keep your form consistent while tuning.
  • Skipping the level check. A slightly crooked sight can throw off all of your pin settings.
  • Forgetting to tighten the mounting screws after the first few shooting sessions.
  • Trying to tune at unknown distances. Measure every mark carefully.
  • Thread-locking compound: Helps keep sight screws from loosening under repeated shooting vibration. View on Amazon
  • Bow hex key set: A full set of metric and standard hex keys makes mounting and adjustments easier. View on Amazon
  • Target stand with a backstop: A stable target lets you sight in at multiple distances safely. View on Amazon

FAQ

Do I need to re-sight my second sight bow AC Odyssey after changing arrows?

Yes. A different arrow weight, length or point can change your arrow’s flight, so re-check your pins at each distance after switching.

How often should I check the sight’s mounting screws?

Check them every few shooting sessions, especially early on. Loose screws are a common cause of shifting groups.

Can I use this sight with a different bow?

Only if the mounting system matches your riser. Check the manufacturer’s compatibility notes, and consult a qualified archery pro shop if you are unsure about fit or safety.

Conclusion

Mounting your second sight bow AC Odyssey level and tightening the hardware correctly gives you a stable platform. Sight in from short to long distance, using groups of several arrows at each pin. Re-check your settings whenever your equipment or form changes.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.