Savage Pendulum Bow Sight: Setup and Use Guide for Beginners
Learn how a savage pendulum bow sight works, how to set it up, and how to tune it for accurate shots. A clear beginner guide for target archers.
Updated November 2026
A savage pendulum bow sight is a bow sight that uses a weighted pendulum to hold its aiming pin level regardless of how the bow is tilted. This guide explains how the pendulum works, how to mount and set up the sight, and how to adjust it so your pins line up with your arrows at the distances you shoot. Most of the work happens at the range, so plan on a few sessions of tuning before you trust your sight.
How a Savage Pendulum Bow Sight Works
The pendulum is a weight hung on a pivot inside the sight housing. Gravity keeps it hanging straight down, so the pin guard or pin assembly stays level even when you cant the bow. Canting the bow is the most common cause of missed shots at the target, so this design removes a major source of error. Manufacturers typically describe the pendulum as a self-leveling feature, and it works best when the sight is mounted solidly to the riser.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
Setting Up Your Savage Pendulum Bow Sight
- Mount the sight to the bow using the included bracket, and tighten the bolts only until snug. Overtightening can warp the bracket and affect the pendulum.
- Check that the pendulum swings freely. Tilt the bow slightly and confirm the weight returns to plumb, with no rubbing against the housing.
- Set the sight for left- or right-handed use if your model allows it.
- Install your pins and set the initial height so the first pin is roughly in line with your arrow at the distance you plan to shoot first.
- Confirm your draw length and anchor point are consistent before you start adjusting pins, because a changing anchor will throw off every pin setting.
Tuning Pin Distances at the Range
Start with a short, safe distance, such as 10 to 15 yards, and shoot a group of at least three arrows at the same aiming point. Adjust the pin up or down so the group centers where you aim. Then move back and repeat for each distance you want to mark. Write down each pin setting, because you will want a reference chart when you change conditions.
| Step | What to check | What to do if it is off |
|---|---|---|
| Pendulum | Returns to plumb when bow is canted | Loosen mount, check for debris or rubbing |
| Short-range pin | Arrows group at aiming point | Adjust pin height, retest |
| Longer distances | Each pin hits its marked distance | Record and adjust each pin separately |
| Anchor and release | Consistent every shot | Fix form before changing sight settings |
Common Mistakes
- Adjusting pins while your form is inconsistent, which chases a problem that is really in your anchor or release.
- Overtightening the mount, which can bind the pendulum.
- Skipping the canting check and assuming the sight is level without testing it.
- Changing draw length without re-tuning every pin.
- Shooting too far before the group is tight at shorter distances.
Recommended Gear
- Bow sight tuning kit: Useful for checking mounts and adjusting pins at the bench. View on Amazon
- Bow level: Helps confirm the bow is held plumb while you check the pendulum. View on Amazon
For related setup steps, see Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide and Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes, which covers form problems that can look like sight problems.
FAQ
Does a savage pendulum bow sight need to be perfectly level?
No. The pendulum keeps the pins level on its own, so you only need the riser to be mounted securely. Check that the weight swings freely and returns to plumb.
How often should I re-tune my pins?
Re-check after any change in equipment, draw length, or arrow setup, and whenever your groups start drifting. Many archers also do a quick check at the start of each season.
What if my pendulum sticks?
Remove the sight and look for debris, dried lubricant, or a bent bracket. If the problem continues, contact the manufacturer or a qualified archery technician.
Conclusion
A savage pendulum bow sight removes canting error, which makes it easier to get consistent groups. Set it up carefully, tune one distance at a time, and fix your form before blaming the sight. With a written pin chart and regular checks, your sight will stay reliable through the season.
Related reading
Ready to choose one?
