We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

React H4 Bow Sight: What It Is and How to Set One Up

Learn what a react h4 bow sight is, how its pins and adjustments work, and the steps to set one up for accurate shooting. A clear guide for new archers.

Updated November 2026

A react h4 bow sight is a multi-pin sight built around a fixed set of pins, each set for a specific distance. This guide explains what the sight does, how to mount and adjust it, and how to sight in pins so your arrows group where you aim. Work through the steps in order and you should have a sight that is repeatable at the distances you shoot most.

What a React H4 Bow Sight Does

Most multi-pin sights give you a separate pin for each yardage you have sighted in. A react h4 bow sight follows the same principle with a small number of pins, which keeps the picture simple at full draw. The fewer pins you have to choose between, the less time you spend thinking and the more time you spend holding steady.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Before you buy or mount one, confirm the pin spacing and yardage marks in the manufacturer’s manual. Specifications differ between versions, and the instructions that come with your sight are the reference you should trust.

Mounting and Leveling the Sight

Mount the sight to the riser using the bracket and hardware supplied, then check the alignment before you tighten anything fully.

  1. Attach the sight bracket to the riser at the position the manual recommends, usually with the sight body centered over the arrow path.
  2. Snug the bolts without fully tightening them so you can still shift the sight.
  3. Set a bubble level on the sight housing or a flat surface on the bow, and adjust until the sight is plumb.
  4. Tighten the bolts evenly and recheck the level.

If your bow uses a sight-mounting system with a pivot or dovetail, follow the torque values the bow maker lists. Overtightening can strip threads, so use the recommended settings rather than guessing.

Sighting In the Pins

Sighting in means setting each pin so an arrow shot at that distance lands where the pin is placed. Use a target at a measured distance, shoot from a stable stance, and make small changes one pin at a time.

  1. Measure the distance to the target with a tape or a rangefinder, and mark it on the range.
  2. Shoot three to five arrows at the first pin distance, aiming with the pin on the center of the target.
  3. Look at the group. If it is high, lower the pin. If it is low, raise the pin. If it is left or right, move the pin horizontally.
  4. Make small adjustments, usually a quarter turn or less, then shoot another group to confirm.
  5. Repeat for each distance you plan to use.

Keep your anchor, grip and release the same for every shot. Changing your form between groups makes it impossible to tell whether the sight or your shooting caused the shift. If your arrows are not grouping at all, the problem may be form or equipment rather than the sight, and the article on Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes covers those causes.

Checking and Maintaining Accuracy

Recheck your pins whenever you change arrows, string, draw length or peep height. A different arrow weight changes the flight path, and a new string can change your anchor point, which shifts where the arrow hits at each distance.

Change What to recheck
New arrows or different spine All pins, starting at the closest distance
New string or cable Peep height and anchor point, then all pins
Draw length or draw weight change Full sight-in from the first distance
Sight bracket moved or loosened Level, then all pins

Common Mistakes to Avoid

  • Sighting in from an unmeasured distance, which makes every pin setting meaningless.
  • Making large adjustments after one group instead of confirming with a second group.
  • Tightening the sight bracket before checking level, then having to start over.
  • Changing your anchor or release between groups, which hides the true sight setting.
  • Ignoring a pin that drifts after equipment changes.

A sight level is a small tool that saves time during mounting, and a rangefinder helps you measure target distances accurately during sight-in. For a broader look at distance tools, the article Bow Sights with Rangefinder: 5 Best Picks Compared (2026) reviews the options.

  • A bubble sight level, which gives a quick check that the sight body is plumb before final tightening. View on Amazon
  • A laser rangefinder, which lets you confirm target distances quickly during sight-in. View on Amazon
  • A marked shooting tape, which helps you lay out fixed distances on the range. View on Amazon

FAQ

Do I need a rangefinder to sight in a react h4 bow sight?

You need an accurate known distance, but a rangefinder is not the only way to get one. A measuring tape on a flat range works well and costs you nothing extra.

How often should I recheck my pins?

Recheck after any equipment change, and also if your groups start drifting without an obvious cause. Many archers also do a quick check at the start of each shooting session.

Can I adjust the sight after mounting it?

Yes. The bracket and pins are adjustable, so you can change level and pin positions as needed. For mounting questions specific to your bow, consult your bow manufacturer or a qualified archery shop.

Conclusion

Mount the sight level, sight in each pin from a measured distance, and recheck whenever your equipment changes. Keep your form consistent so the sight shows you the truth about your shooting. With those habits, a react h4 bow sight becomes a reliable tool at the distances you shoot most.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.