Left Handed Back Quiver: How to Choose and Set One Up for Lefties
Learn how a left handed back quiver differs from a right-hand setup, how to choose the right one, and how to fit and draw comfortably as a lefty.
Updated November 2026
A left handed back quiver is built so that a left-handed archer can reach arrows smoothly over the right shoulder and draw with the left hand. Getting the handedness and fit right means faster reloads, fewer snagged fletchings, and a more consistent draw. This guide walks through how to choose one, set it up, and avoid the errors that trip up many lefties.
Understand What “Left Handed” Means on a Back Quiver
On a back quiver, handedness refers to which hand draws the bow. Most left-handed back quivers are designed so the arrows sit at the left side of the body and the archer reaches over the right shoulder with the left hand, which keeps the quiver mouth and fletchings clear of the bow arm. Before buying, confirm with the manufacturer which orientation the product is made for, because some quivers are labeled by the side the arrows ride on rather than the drawing hand.
Shopping for one? See our guide: Bear Archery Traditional Back Quiver Review (2026).
Choose the Right Style and Size for Your Arrows
Start with your arrow length and diameter, then pick a quiver body that holds them without crowding. Traditional leather designs suit recurve and longbow shooters, while modern fabric or foam-lined models are common with compound and recurve setups. Check the stated arrow capacity and the internal diameter, and allow a little extra room so fletchings do not rub on the mouth. A quiver that is too tight will make arrows difficult to pull cleanly, and one that is too loose lets arrows rattle and fall out during movement.
Fit and Adjust the Quiver
A back quiver should sit high between the shoulder blades without pulling on the neck. Follow these steps:
- Put the quiver on with the arrows loaded, as you would while shooting.
- Adjust the shoulder straps until the body rests snug against your back and does not swing.
- Set the belt or waist strap, if the model has one, so the weight sits on your hips rather than your shoulders.
- Angle the mouth so arrows slide in and out at about the height of your shoulder.
- Reach back with your left hand, grab an arrow, and return it. Repeat several times to confirm the motion is smooth.
If your draw hand catches the fletchings every time, tilt the quiver slightly or check whether you have the wrong handedness. For more on sizing and setup steps, see Youth Archery Back Quiver: A Step-by-Step Fitting and Setup Guide, which applies the same fitting logic to smaller frames.
Plan Your Arrow Retrieval and Carry Position
Left-handed archers often find that the quiver mouth should sit slightly further left than a right-hander’s, so the arrow path does not cross the bow arm. Practice reloading at a slow pace first, then increase speed. Keep the bow in your right hand while you reach back, and avoid twisting the torso more than needed. If you shoot from horseback or move frequently, a secure design matters more, and Mounted Archery Back Quiver: How to Choose and Fit One for Horseback Shooting covers that situation in more depth.
Carrying the Bow and Quiver Together
When you carry a bow on your back along with the quiver, keep the bow’s limbs away from the arrow mouth and check that the bow does not bump the fletchings when you move. The principles are covered in Bow and Quiver on Back: How to Carry Both Safely and Comfortably.
Common Mistakes
- Buying a right-handed quiver and trying to make it work by reversing the straps.
- Choosing a quiver body that is too narrow, causing fletchings to snag on every draw.
- Leaving the straps loose, so the quiver swings and arrows fall out.
- Setting the mouth too low, which forces a wide reach and slows the reload.
- Skipping practice reloads with the bow in hand before going to the line.
Recommended Gear
- Quiver liner or arrow sleeve: Helps protect fletchings and keeps arrows from rattling in a roomy body. View on Amazon
- Adjustable quiver strap set: Lets you fine-tune height and tension so the quiver stays put during movement. View on Amazon
FAQ
Can a right-handed back quiver be used by a left-handed archer?
It is usually not recommended. The mouth and arrow angle are set for a right-hand draw, so the reach and fletching clearance will be awkward. A left-handed model is the better choice.
How do I know which handedness to buy?
Check which hand you draw the bow with. If you draw with your left hand, you need a left-handed quiver. Confirm the manufacturer’s orientation before ordering, since labeling varies.
Should I check my setup with a professional?
If you have shoulder or back pain, or if the quiver causes discomfort during use, consult a physical therapist or an experienced archery coach for guidance on fit and posture.
Conclusion
A well-chosen left handed back quiver lets you reload quickly and keeps the draw clean. Match the handedness and capacity to your bow and arrows, fit the straps so the quiver stays still, and practice your reload before shooting. With those steps done, your focus can stay on form and the target.
Ready to choose one?
