Left Handed Arrow Rest: Setup Steps and Buying Tips for Lefties
Learn how a left handed arrow rest works, how to pick the right one for your bow, and how to set it up so your arrows fly true.
Updated November 2026
A left handed arrow rest is built to sit on the left side of the bow for a right-handed shooter, or on the right side for a left-handed shooter. Getting the orientation right is the first step toward clean arrow flight. This guide walks you through choosing a left handed arrow rest, mounting it, and checking that it is working.
Understanding Handedness and Rest Orientation
Handedness on an arrow rest refers to the side of the bow the rest is mounted on, and it is determined by which hand holds the bow. A right-handed archer holds the bow in the left hand and pulls the string with the right, so a rest designed for that setup sits on the left side of the riser. A left-handed archer holds the bow in the right hand, which means a left handed arrow rest is the one that mounts on the right side of the riser.
Before buying, confirm which hand you draw with and which hand holds the grip. Many lefties assume a rest labeled “left handed” fits them, when in fact the label refers to the shooting hand, so check the manufacturer’s specifications carefully. If you are unsure, a pro shop can confirm the correct orientation in a few minutes.
Choosing the Right Left Handed Arrow Rest for Your Bow
The type of rest matters as much as the handedness. Drop-away rests retract out of the arrow’s path at release and suit most compound bows. Containment and flipper rests offer more arrow support and are common on recurve and traditional setups. Check whether your bow has the mounting holes and clearance the rest requires, and confirm that the rest’s arm length suits your bow’s riser design. Our guide to Types of Arrow Rest: A Guide to Each Style for Archers explains each style in more detail.
Compound shooters who want a drop-away should look at the 6 Best Left Handed Drop Away Arrow Rest Picks for Compound Bows (2026) for models built with left-handed mounting in mind.
Step-by-Step: Mounting a Left Handed Arrow Rest
Once you have the right rest, mounting is straightforward. Work on a clean bench with the bow unstrung, and keep the bow stable so it does not slip.
- Confirm the rest is oriented for your shooting hand before you tighten anything.
- Attach the rest to the mounting bracket or riser using the supplied hardware, leaving screws loose.
- Set the rest at a height roughly level with the arrow’s centerline, then tighten gently.
- Check that the rest’s arm clears the grip and does not contact the bow hand.
- String the bow and look at the arrow from the rear to confirm it sits centered over the riser.
Some rests use a sliding or adjustable bracket, which makes fine tuning easier. For a full walkthrough of one common installation, see Truglo Drop Away Arrow Rest Installation: 6 Steps for a Clean Setup.
Tuning Your Setup for Clean Arrow Flight
Tuning turns a correct installation into an accurate one. Shoot a few arrows at a close target, about 10 to 15 yards, and watch where they land. If arrows consistently impact to one side, the rest may be set too far that way, and small horizontal adjustments usually correct it. Paper tuning, with the arrow shot through a sheet of paper, reveals the arrow’s flight angle and helps you judge whether the rest is positioned well. The article Zero Effect Arrow Rest: How It Works and How to Set One Up covers a related tuning approach that many archers find useful.
Make one adjustment at a time and retest. Changing several settings together makes it hard to know which change helped.
Common Mistakes to Avoid
- Buying a rest by the label without checking which hand the bow is held in.
- Tightening mounting screws fully before confirming the rest height and position.
- Letting the rest arm contact the grip or bow hand during the shot.
- Tuning several settings at once, which hides the cause of poor arrow flight.
- Ignoring worn rest parts; replace fingers, springs or bushings when they show wear.
Recommended Gear
A bow square helps you check that the rest sits at the correct angle relative to the string. View on Amazon
A cloth-faced paper tuning target lets you read arrow flight clearly during setup. View on Amazon
FAQ
Can I use a right handed rest on a left-handed setup?
No. A rest mounted for the wrong shooting hand will sit on the wrong side of the riser and interfere with the arrow’s path. Always match the rest to the hand you draw with.
How do I know if my rest is set correctly?
Paper tuning and a close-range group are the most reliable checks. If the arrow tears a clean hole in the center of the paper and groups tightly at close range, the rest is likely well set.
Do I need a special tool to install a left handed arrow rest?
Most rests install with a basic hex key set and a screwdriver. Consult your bow or rest manufacturer’s instructions, or a qualified pro shop technician, if you are unsure about mounting.
Conclusion
A left handed arrow rest works only when it matches your shooting hand, your bow style and your draw. Confirm orientation first, mount the rest carefully, then tune with small, deliberate changes. With those steps done, your arrows should fly cleanly and your groups should tighten up.
Ready to choose one?
