We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Wear an Archery Arm Guard Correctly: 6 Steps for a Secure Fit

Learn how to wear an archery arm guard correctly, from placement and strap tension to checking fit, so it protects your forearm without slipping.

Updated November 2026

To wear an archery arm guard correctly, place it on the inside of your bow arm with the guard centered over the forearm, fasten it snug enough that it does not shift, and check that it covers the area your bowstring hits at full draw. Done right, the guard stops string slap from leaving bruises and keeps your sleeve out of the string path. The steps below cover placement, fastening and a quick fit check you can run before every shooting session.

What You Need Before You Start

  • Your arm guard, with its strap or buckle intact
  • A short-sleeve or fitted long-sleeve shirt that will not catch on the string
  • Your bow, so you can test the fit at full draw

How to Put On an Archery Arm Guard Step by Step

  1. Hold the guard with the padded side toward your skin. The smooth outer face should sit away from your arm. Most guards are marked for left or right use, so confirm the orientation before you fasten anything.
  2. Position it on the inside of your bow forearm. The guard should sit roughly two to three finger widths below the elbow, centered between the wrist and elbow. This is where the string is most likely to travel after release.
  3. Wrap the strap around your forearm. Pull the strap until it is snug, then fasten it. It should hold without digging in and without any gap that lets the guard rotate.
  4. Check the lateral position. The guard should cover the inside of the forearm, not the top or the outer edge. Move it slightly if your string path runs across a different area.
  5. Test at full draw. Draw the bow to your anchor, hold for a moment, and look down. The string should travel over the guard without touching bare skin.
  6. Re-check after a few shots. Straps loosen with use. Glance at the guard after every few ends and tighten as needed.

How to Set the Fit for Your Arm and Bow

Fit depends on your forearm size and how your string travels. Archers with a thicker forearm often need a longer strap setting, while a slim forearm may need a tighter wrap to keep the guard from slipping. Your bow’s string path also matters: a bow with a wider string path or a different riser design may need the guard positioned slightly higher or lower. If your string strikes the guard edge rather than its center, shift the guard until the contact sits on the padded area.

Shopping for one? See our guide: 4 Best Archery Leather Arm Guard Options for Target Archers (2026).

Signs the Fit Is Wrong

Symptom Likely cause Fix
Guard rotates during a shot Strap too loose Tighten one notch and re-test
Skin pinched or numb Strap too tight Loosen slightly
String hits bare skin above or below the guard Guard misplaced Move it toward the string path
Sleeve catches on the string Loose or baggy sleeve Wear a fitted top or tuck the sleeve

Common Mistakes to Avoid

  • Wearing the guard on the outside of the forearm, where the string does not travel.
  • Fastening it too tight, which can restrict blood flow and cause numbness.
  • Skipping the full-draw test, so the guard looks right at rest but fails under load.
  • Ignoring a guard that has slipped during a session instead of re-positioning it.
  • Wearing loose clothing that can snag the string before it reaches the guard.
  • Allen Archery Youth Arm Guard – a well-known option for archers who want a straightforward strap design that is easy to adjust between sessions. View on Amazon
  • Bear Archery Arm Guard – a common choice among recurve and traditional shooters who want a guard with a simple buckle closure. View on Amazon

For more detail on picking the right size and style, see Archery Arm Guard Use: How to Wear One Correctly and Protect Your Forearm and Archery Arm Guard Sleeve: How to Choose, Fit and Wear One (7 Steps). If you shoot a recurve, Recurve Bow Arm Guard: How to Choose, Fit and Wear One Correctly covers the string path differences you may notice.

FAQ

Should an arm guard be worn on the left or right arm?

It goes on the bow arm, the arm that holds the bow at full draw. Right-handed shooters usually wear it on the left arm, and left-handed shooters on the right.

How tight should the strap be?

Snug enough that the guard does not shift when you draw, but loose enough that you can slide a finger under the strap without pressure marks. Recheck after a few shots.

Can I wear an arm guard over a long sleeve?

Yes, many archers do. Choose a fitted sleeve so it cannot catch the string, and check that the guard still sits directly over the string path.

Conclusion

Place the guard on the inside of your bow forearm, fasten it snug, and confirm at full draw that the string clears bare skin. Re-check after a few shots and adjust as your strap settles. A few minutes of setup before each session prevents bruises and keeps your shot consistent.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Archery Society.