We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Sight In a One Pin Bow Sight: A Step-by-Step Guide

Learn how to sight in a one pin bow sight with a clear step-by-step process covering setup, distance marks, pin tuning and fine adjustments for accurate shots.

Updated November 2026

Learning how to sight in a one pin bow sight means setting a single pin so that your arrow lands where you aim at a set distance. Once it is done, you will know which pin position to use at each yardage you practice from. The process is simple, but it rewards patience and a stable shooting form.

Before You Start: Set Up the Basics

A sight only works if the bow itself is set up correctly. Check that the riser is level, the nocking point is in place, and the arrow rest is adjusted so the arrow flies straight. Most manufacturers specify a sight mounting position in their instructions, so follow those numbers first. For help with the measuring side, see Single Pin Bow Sight Tape: How to Set Up and Use One Correctly.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

  • Bow with the draw length and draw weight you will shoot at all times
  • Stable target stand or bag, with a backstop
  • Target face at a known distance, starting at 20 yards
  • Arrows that are matched in spine and length
  • Allen wrenches, a bow square and a tape measure
  • Pin or sight tape marked for your distance settings

Step-by-Step: Sighting In Your One Pin Sight

Step 1: Set Your Anchor and Form

Draw the bow to your normal anchor point and hold it steady. Your sight will only be accurate if your anchor is the same every time. Use a consistent release and follow through.

Step 2: Shoot at 20 Yards

Aim the pin at the center of the target and shoot three to five arrows. Look at the group, not individual arrows. If the group sits high, lower the pin. If it sits low, raise it. If it sits left or right, adjust the windage on the sight housing.

Step 3: Make Fine Adjustments

Move the pin in small increments, usually a quarter turn of the adjustment screw at a time. Shoot another group after each change, and never make two adjustments before checking the result. Once the group is centered, mark the setting for that distance.

Step 4: Repeat at Other Distances

Move back to 30, 40 and 50 yards, or to the distances you actually shoot. At each distance, shoot a group and adjust until the arrows hit the center. Record the settings so you can return to them later.

Distance (yards) Action Goal
20 Shoot 3–5 arrows, adjust vertical and windage Centered group
30 Shoot 3–5 arrows, fine-tune pin Centered group
40 Shoot 3–5 arrows, record setting Centered group
50 Shoot 3–5 arrows, record setting Centered group

Tips and Common Mistakes

  • Do not chase single arrows. Judge your adjustments by the group.
  • Shoot from the same spot and stance every time, or your results will drift.
  • Check that the sight bracket and pin are tight after each session.
  • Let your form settle before adjusting. Fatigue causes inconsistent shots.
  • If the group will not center, check the arrow rest and nock point before changing the sight.

A bow square helps you confirm that the sight is level and square to the bow, which keeps your adjustments meaningful. View on Amazon

A sight tape or yardage marker lets you record settings for each distance so you can return to them quickly. View on Amazon

FAQ

How often should I re-sight my one pin bow sight?

Check your sight whenever you change arrows, string, draw weight, or after a long break. Many archers also do a quick check at the start of each season.

Can I sight in a one pin sight indoors?

Yes. Indoor ranges work well for initial setup because the distances are fixed and the lighting is consistent. Outdoor conditions such as wind may still require fine tuning later.

Do I need to adjust the sight after changing my draw length?

Usually, yes. A change in draw length changes arrow speed and point of impact, so re-sight at each distance after the change.

Conclusion

Sighting in a one pin bow sight comes down to a consistent anchor, a few groups at set distances, and small, careful adjustments. Record your settings so you can return to them easily. If you are unsure about your bow setup, consider asking a qualified archery pro shop for a check.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.