How to Measure Archery Arrows: Length, Spine and Weight Explained
Learn how to measure archery arrows correctly, including shaft length, point weight and spine checks, so your arrows fit your draw and bow.
Updated November 2026
To measure archery arrows, you check three things: shaft length, point weight, and spine. Length tells you whether the arrow fits your draw, weight affects how it flies, and spine tells you how much the shaft bends when released. This guide walks you through each measurement with simple tools and steps you can do at home.
Step 1: Measure Your Draw Length First
Arrow length starts with your draw length, not the arrow itself. Most manufacturers recommend an arrow that is about 1 inch longer than your draw length, which leaves room for the arrow to sit correctly on the rest and in the bow. Measure your draw length with a helper, using a tape from the nock groove to the throat of the grip at full draw, or follow the wingspan method: divide your arm span in inches by 2.5 as a rough estimate.
Shopping for one? See our guide: 6 Best Carbon Fiber Archery Arrows for Target Practice (2026).
Step 2: Measure the Arrow Shaft Length
Once you have your draw length, measure the shaft itself. Lay a straight edge or tape along the shaft from the end of the nock to the point where the shaft enters the insert. Shafts are usually sold cut to a stated length, but cut arrows and used shafts can vary, so check each one. Do not add a point or nock when you measure the shaft; measure the bare shaft only.
Step 3: Check Point Weight and Total Arrow Weight
Point weight is the mass of the tip assembly, and it is printed on most field and target points in grains. Total arrow weight is the shaft, nock, fletching, and point combined. To weigh an arrow, use a grain scale or a digital reloading scale set to grains. Record the total weight of each arrow so your set matches within a few grains, because mismatched arrows group differently.
Step 4: Confirm Spine Matches Your Bow
Spine is a rating of how stiff a shaft is, and it is printed on the shaft as a number such as 500 or 600. Spine is measured by hanging a set weight from the center of a shaft supported at two points and measuring the deflection. You do not need to test spine yourself to know what you need: check your bow’s draw weight and draw length against the manufacturer’s spine chart. A bow at a given draw weight and length needs a specific spine range, and a shaft outside that range will fly poorly.
Tools you need
- A flexible tape measure or rigid ruler graduated in 1/16 inch
- A digital grain scale or reloading scale
- Your bow’s draw weight and draw length
- The manufacturer’s arrow spine chart
- A notebook to record each arrow’s numbers
Common Mistakes to Avoid
- Measuring draw length while relaxed instead of at full draw.
- Including the nock or point when measuring shaft length.
- Mixing arrows with different point weights in the same set.
- Ignoring spine because the arrow looks the right size.
- Trusting a cut shaft without re-measuring after the saw.
Recommended Gear
- Digital grain scale: Weighs each arrow component so your set stays consistent. View on Amazon
- Arrow measuring tape: A rigid ruler or tape that reads in fractions of an inch for accurate shaft length. View on Amazon
FAQ
How long should my arrows be?
Most archers use arrows about 1 inch longer than their draw length. Check your bow manufacturer’s recommendation, since some setups need slightly different lengths.
Can I measure spine at home?
You can hang a weight from a supported shaft to see deflection, but a spine chart matched to your draw weight and length is the more reliable method for most archers.
Why do arrows need matching weight?
Arrows with different total weights can fly differently and group poorly. Keeping each set within a few grains of each other helps arrows hit the same spot.
Conclusion
Measure your draw length first, then the shaft length, then point and total weight, and finally check spine against your bow’s specs. Record every number so you can rebuild or replace arrows later. If you are unsure about spine or draw setup, ask a qualified archery pro or bow shop to check before you shoot.
Related reading
- Glow in the Dark Arrows Archery: How to Choose and Use Them Safely
- Best Hunting Arrows Archery Talk: Top Picks and How to Choose
- Arrows for 3D Archery: How to Choose the Right Shafts and Spine
- Archery Bow and Arrows for Sale: How to Buy the Right Setup
- Archery Arrows for Hunting: How to Choose the Right Shaft and Spine
- Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes
Ready to choose one?
