HHA Virtus Arrow Rest: Setup, Tuning and Buying Tips for Archers
Learn how the HHA Virtus arrow rest works, how to install and tune it, and what to check before buying one. A practical guide for new archers.
Updated November 2026
The HHA Virtus arrow rest is a drop-away style rest that holds the arrow on the shelf until the shot, then drops out of the way as the arrow leaves the bow. This guide explains what the Virtus does, how to install it, how to set its position and tune it so your arrows fly straight, and what to look for before you buy.
What the HHA Virtus Arrow Rest Does
An arrow rest supports the arrow on the riser so it can leave the bow without contacting the riser, which is the main cause of inconsistent groups. A drop-away rest like the Virtus uses a spring-loaded or cam-driven arm that stays under the arrow during the draw and then falls clear at release. Compared with a fixed rest, this removes most of the arrow’s contact with the rest during the shot, which usually helps accuracy. Its effect depends on correct setup, so an improperly installed unit will not perform well no matter how good the design is.
Shopping for one? See our guide: Arrow Rest for Compound Bow: 6 Best Picks Compared (2026).
Installing and Positioning the Virtus
Before you start, confirm that the mounting holes on your riser match the rest’s mounting pattern and that you have the correct screws and any shims the kit includes. Work on a stable surface and keep the bow unstrung unless your manufacturer’s instructions say otherwise.
- Mount the rest loosely to the riser so it can still move.
- Set the rest height so the arrow sits centered on the nock point you have established, usually with the arrow parallel to the shelf.
- Set the centershot position so the arrow is centered in the bow’s window. Measure from the riser edge to the arrow shaft at the nock end and at the tip end.
- Check that the drop-away arm moves freely and clears the arrow fully at release.
- Tighten all screws to the torque or snugness specified in the manual.
Tuning the Rest for Clean Arrow Flight
Tuning means adjusting the rest until the arrow leaves the bow with minimal paper tear or tail movement. Start with a paper tuning test: shoot an arrow through a sheet of paper stretched on a frame about 3 feet from the bow. A clean tear with the fletching centered indicates good tune; a tear that looks like a fish tail points to a rest or nock-point problem.
Make small adjustments, one at a time. Move the rest in increments of about 1/32 inch, shoot again, and compare results. Changes to the rest’s left-right position affect the tear direction, while height changes affect vertical alignment. If the drop-away arm contacts the arrow during release, the spring tension or arm position needs correction before you tune anything else.
For a broader look at how drop-away designs differ, see Types of Arrow Rest: A Guide to Each Style for Archers. If you are installing a drop-away for the first time, Truglo Drop Away Arrow Rest Installation: 6 Steps for a Clean Setup walks through a similar process step by step.
Buying Tips for the HHA Virtus
Before you buy, confirm your bow’s riser has the correct mounting pattern and that you can access the mounting holes. Check whether the rest is designed for right-handed or left-handed shooters, since the drop-away arm orientation matters. Make sure you can source the replacement parts you are most likely to need, such as springs or arms, because these wear out first.
It also helps to compare the Virtus with other drop-away options before committing. Ripcord Drive Arrow Rest Compared: 6 Best Picks for 2026 shows how another popular design approaches the same job, which can help you decide whether the Virtus suits your shooting style.
Common Mistakes
- Skipping the paper test and relying only on how the arrow looks in the target.
- Tightening the mounting screws before setting centershot, which locks in a poor position.
- Making large rest adjustments at once, which makes it hard to tell which change helped.
- Ignoring a drop-away arm that does not clear the arrow fully at release.
- Forgetting to recheck the setup after changing arrows, broadheads or nock point.
Recommended Gear
- Paper tuning frame: A stable frame lets you see the arrow’s flight clearly during tuning. View on Amazon
- Bow square: Helps you check nock position and rest alignment against the string. View on Amazon
- Allen wrench set: Lets you adjust rest screws without stripping them. View on Amazon
FAQ
Is the HHA Virtus suitable for beginners?
It can be, but beginners should expect a short learning curve on setup and tuning. Following a paper tuning routine makes the process manageable.
How often should I check the rest’s setup?
Check it whenever you change arrows, broadheads or nock point, and after any hard impact to the bow. A quick paper test after changes catches most problems early.
Can I use the Virtus with a traditional bow?
Drop-away rests are generally designed for compound and recurve setups with standard mounting. Check the manufacturer’s compatibility notes before mounting one on a traditional bow.
Conclusion
The HHA Virtus can improve arrow flight when it is mounted, centered and tuned correctly. Work through installation and paper tuning in small steps, and recheck the setup after any equipment change. If you are unsure about a setting, consult an experienced archery shop or certified coach for hands-on help.
Related reading
- Zero Effect Arrow Rest: How It Works and How to Set One Up
- Whisker Biscuit Arrow Rest Installation: A Step-by-Step Guide
Ready to choose one?
