We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

B3 Exact Bow Sight: How to Set It Up and Sight In a Bow

Learn how to set up, sight in and tune a b3 exact bow sight for accurate target shots, with clear steps for beginners and common mistakes to avoid.

Updated November 2026

A b3 exact bow sight is a pin-style sight built for target and field archers who want repeatable aim. This guide walks you through mounting the sight, setting your pin gaps at known distances, and fine-tuning the sight so your arrows group where you aim. Plan on about an hour for a first setup, plus time at the range to confirm your settings.

Before You Mount the Sight

Start with a stable bow and a rest that holds the arrow in the same spot every shot. A sight can only be as consistent as your form, so confirm your nock point, anchor and release are repeatable before you touch the sight. If your arrows are still scattering, review Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes first.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Check that your sight bracket matches your bow’s riser and that the mounting screws are the correct size. Do not overtighten them, because you can strip threads or distort the bracket.

Mounting and Leveling the Sight

  1. Attach the sight bracket to the riser using the mounting holes your bow provides. Leave the screws slightly loose at first.
  2. Slide the sight so the sight window sits centered over the arrow shaft when you draw to your normal anchor.
  3. Level the sight using a bubble level or a plumb line hung from the string. The sight housing should be vertical, or the pins will drift as you change distance.
  4. Tighten the screws evenly, checking alignment after each turn.
  5. Confirm the pin guard or housing does not contact the string or cable at full draw.

Setting Pin Gaps and Sighting In

Sighting in means setting each pin so the arrow lands where that pin points at a known distance. Begin at a close, fixed distance, such as 20 yards, and work outward in increments you can shoot consistently.

  1. Shoot a group of at least three arrows at 20 yards, aiming at the center of a target face.
  2. Adjust the top pin, or the pin you are using for that distance, until your arrows group at the aiming point.
  3. Move back to 30 yards and repeat. Adjust the pin for that distance without changing the 20-yard setting.
  4. Continue in the same way for each distance you plan to shoot in competition or the field.
  5. Mark the final pin positions with a fine marker or label tape so you can recheck them quickly.

Quick Reference Checklist

  • Level sight housing confirmed
  • Pin guard clears string at full draw
  • Groups of three arrows at each distance
  • Pin settings marked and recorded
  • Screws checked for tightness after the first session

Fine-Tuning and Maintenance

After your first session, recheck the group size at each distance. If arrows consistently hit left or right, your sight may need horizontal adjustment, or your form may be pulling the arrow off target. Make one change at a time so you can tell which adjustment worked.

Retighten screws after a few sessions, because vibration can loosen them. Keep the sight housing clean and check the pin guards for bends. Sight settings can shift with temperature changes or after a bow is dropped, so a quick recheck before a tournament is worthwhile.

Distance What to Check
20 yards Base pin group centered on the target
30 yards Second pin group, no change to the 20-yard setting
40 yards and beyond Each additional pin, checked in order

Common Mistakes

  • Sighting in with inconsistent form, which makes every pin setting look wrong.
  • Skipping the level check, causing pins to drift as distance changes.
  • Shooting one arrow per distance and trusting a single result.
  • Changing several settings at once, so you cannot tell which change helped.
  • Ignoring the pin guard, which can cause string contact and erratic shots.

FAQ

How many arrows should I shoot when sighting in?

Shoot at least three arrows at each distance so you can judge group size rather than a single shot. Groups that stay tight over several sessions are a better sign of a correct setting.

Why do my pins drift when I change distance?

The sight housing is most likely not level. Recheck the level and make sure the sight is mounted straight before adjusting the pins.

Should a professional check my sight setup?

If you are unsure about mounting or your bow’s warranty, consult a qualified archery pro shop. They can inspect the bracket and confirm your setup safely.

Conclusion

A properly leveled and sighted b3 exact bow sight gives you consistent aim at each distance you shoot. Work from a stable form, sight in one distance at a time, and record your settings. Recheck them regularly as your form and equipment settle in.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.