We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Fall Away Arrow Rest: How It Works, Setup Steps and Tuning Tips

Learn how a fall away arrow rest works, how to set one up on your compound bow, and the tuning mistakes to avoid for cleaner, quieter shots.

Updated November 2026

A fall away arrow rest is a launcher-style rest that holds your arrow on the riser until the shot, then drops out of the way as the arrow leaves the bow. This guide explains how the mechanism works, how to set one up, and how to check that it is doing its job. The goal is a rest that gets out of the arrow’s path without disturbing flight.

How a Fall Away Arrow Rest Works

Most fall away rests use a cable or string connected to the bow’s cams or limbs. When you draw the bow, the rest’s arm stays up and supports the arrow. At release, the cable slackens or moves, and a spring or limb-driven mechanism pulls the arm down. Manufacturers specify different trigger points, so check your model’s instructions for exactly when the arm moves.

Shopping for one? See our guide: 7 Best Fall Away Arrow Rests for Hunting: Buyer's Guide (2026).

Because the arm is fully out of the way at release, the arrow contacts almost nothing as it leaves. That is the main reason hunters choose this style over a fixed rest. For a broader comparison, see Drop Away Arrow Rest vs Whisker Biscuit: Which Should You Choose?.

Setting Up Your Fall Away Arrow Rest

Installation is simple, but the details matter. Work through these steps before you shoot:

  1. Mount the rest on the riser at the height your manufacturer recommends, usually near the center of the arrow shaft.
  2. Attach the cable or string to the cam or limb at the anchor point specified in your instructions.
  3. Set the arm’s pressure so it cradles the arrow lightly without pinching it.
  4. Adjust the arm’s rest position so it clears the arrow fletching at full draw.
  5. Check that the arm drops fully when released, with no hang-ups.

If your bow has a cable clamp or cable guard, confirm they do not interfere with the rest’s travel. Some riser designs need a specific mounting bracket, so verify compatibility first.

Tuning the Rest for Clean Arrow Flight

Once installed, tune the rest with paper or bare shaft testing. Shoot through paper at about 3 to 5 feet. A clean tear with the fletching passing through the center indicates good tuning. If you see a fishtail shape, the arrow is leaving at an angle, and you should adjust the rest height, the arm position, or the nock point.

Bare shaft testing works the same way. Shoot an unfletched shaft and a fletched one at the same target. If they group together at a reasonable distance, your rest and arrow are working together. If the bare shaft lands far from the fletched arrow, adjust the rest in small increments and retest.

Checking Arm Timing

Watch the arm during a few dry fires with a nocked arrow. The arm should move out of the arrow’s path before the arrow clears the riser. If the arm lags, check the cable tension and the trigger point setting. Consult your bow dealer or a qualified technician if you are unsure, especially on a new bow.

Common Mistakes to Avoid

  • Setting the arm pressure too tight, which can slow the arrow or cause inconsistent flight.
  • Skipping paper tuning after changing arrows, broadheads, or draw weight.
  • Leaving the cable or string loose, which can cause the arm to drop at the wrong moment.
  • Ignoring wear on the arm’s rubber or foam contact points, which can scuff fletching.
  • Mounting the rest at a height that does not match your arrow’s center.

A few accessories make setup and tuning easier:

  • Paper tuning kit: Lets you check arrow flight quickly at home. View on Amazon
  • Bow square: Helps you measure nock point and brace height accurately. View on Amazon
  • Cable and string peeper: Lets you confirm cable alignment at a glance. View on Amazon

FAQ

Is a fall away arrow rest better than a fixed rest?

For most hunters, yes, because the arm clears the arrow at release, reducing contact and noise. Target archers often prefer simpler rests that need less adjustment.

How often should I check my fall away rest?

Check the cable, arm pivot, and mounting screws before each season and after any rough handling. Re-tune whenever you change arrows or broadheads.

Can I install a fall away rest myself?

Many archers can, following the manufacturer’s instructions carefully. If you are unsure about cable timing or your bow’s warranty, have a professional bow shop do the installation.

Conclusion

A fall away arrow rest gives a clean release by moving out of the arrow’s path at the right moment. Mount it carefully, tune with paper and bare shafts, and recheck after any equipment change. With those steps, your arrows should fly more consistently.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.