Diy Radial Arm Saw Blade Guard: 5 Best Options for Safer Cuts (2026)
Looking for a diy radial arm saw blade guard? Compare five guard options by fit, coverage and build, with specs, pros, cons and buying tips.
Updated November 2026
If you are looking for a diy radial arm saw blade guard, you are probably trying to close a gap that the saw’s stock guard left open, or replace one that has cracked, warped or gone missing. The right guard does two jobs: it keeps your fingers and hands out of the blade path, and it directs sawdust and chips away from your face. This list focuses on guard parts and kits that suit a DIY approach, meaning you can mount, adapt or modify them with basic tools. Selection criteria were fit and compatibility with common saw models, coverage of the blade, build materials, ease of installation, and patterns in owner feedback about alignment and durability.
Our top picks at a glance
- 1
TOP CHOICEBest overallSawStop Dust Collection Blade Guard Assembly TSG-DCView on Amazon - 2
TOP CHOICEBest for Ryobi miter saw ownersMiter Saw Blade Guard for Ryobi TSS121, TSS121T, TSS120LView on Amazon - 3
TOP CHOICEBest budget pickTamatori Saw Blade Guard 9814View on Amazon - 4
Best for replacing a worn Ryobi guardRyobi Parts Lower Blade Guard Assembly 080016005704View on Amazon - 5
Best for keeping spares on hand4PCS 080016005704 Ryobi Blade Guard Assembly TSS102L TS1345L 10" Miter SawView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| SawStop Dust Collection Blade Guard Assembly TSG-DC | Dust-controlled cutting with a premium guard | Integrated dust collection port |
| Miter Saw Blade Guard for Ryobi TSS121, TSS121T, TSS120L | Ryobi 12-inch miter saw owners | Lower guard sized for 12-inch blades |
| Tamatori Saw Blade Guard 9814 | Budget-minded shops and general replacement | Fits 11.8-inch (300 mm) blades |
| Ryobi Parts Lower Blade Guard Assembly 080016005704 | Direct replacement on Ryobi TSS102L and TS1345L | Model-specific OEM-style assembly |
| 4PCS 080016005704 Ryobi Blade Guard Assembly | Multi-saw shops and spare stock | Four guard assemblies in one pack |
SawStop Dust Collection Blade Guard Assembly TSG-DC
Best for: Dust-controlled cutting with a premium guard
This assembly suits woodworkers who already run a dust collector and want the guard to take part in capturing chips at the blade. It is built for a specific tool family, so confirm compatibility with your saw before buying, and treat any modification as a job for careful measurement.
Key specs
- Dust collection port on the guard body
- Designed as a dust collection blade guard assembly
- Sold under the SawStop brand
Pros
- Connects to a standard dust hose for better chip capture
- Purpose-built assembly rather than a loose shield
- Brand known for safety-focused saw design
Cons
- Only useful if you have a compatible dust hose and collector
- Fit depends on matching your saw model exactly
Bottom line: Pick this if you want the most complete dust control and your saw is already set up for SawStop-style guarding.
View on AmazonMiter Saw Blade Guard for Ryobi TSS121, TSS121T, TSS120L
089240023710 Miter Saw Blade Guard for Ryobi TSS121, TSS121T, TSS120L | 12" Miter Saw Lower Blade Guard 1 Pcs
Best for: Ryobi miter saw owners who need a 12-inch lower guard
This is a lower blade guard listed for several Ryobi 12-inch miter saw models. It suits owners whose original guard has cracked or been removed and who want a like-for-like replacement rather than a custom build.
Key specs
- Listed for Ryobi TSS121, TSS121T and TSS120L models
- Sized for a 12-inch blade
- Sold as one piece
Pros
- Specific model listing reduces guesswork
- Straightforward replacement without modifying the saw
- Single piece keeps the install simple
Cons
- Compatibility is limited to the listed models
- Owners often report that alignment takes a few adjustment attempts
Bottom line: A sensible choice for Ryobi 12-inch miter saw owners replacing a damaged lower guard.
View on AmazonTamatori Saw Blade Guard 9814
Best for: Budget-minded shops and general replacement
This guard is listed for 11.8-inch (300 mm) blades. It works well for shops that want a replacement shield without paying for brand-name hardware, provided the blade size matches.
Key specs
- Fits 11.8-inch (300 mm) blades
- Listed model number 9814
Pros
- Budget-friendly choice for replacement
- Blade size is clearly stated in the listing
- Useful as a backup guard
Cons
- Brand and fit documentation are less detailed than OEM parts
- Owners often recommend checking mounting holes before committing
Bottom line: Good for buyers who need a low-cost replacement and can verify the blade size first.
View on AmazonRyobi Parts Lower Blade Guard Assembly 080016005704
Best for: Direct replacement on Ryobi TSS102L and TS1345L
This is an assembly part number matched to specific Ryobi miter saw models. If your guard is worn, bent or missing, a model-matched assembly is the most direct route back to factory-style protection.
Key specs
- Part number 080016005704
- Listed for Ryobi TSS102L and TS1345L miter saws
Pros
- Matches the manufacturer’s part number
- Closest to an original replacement
- Easy to confirm against your saw’s manual
Cons
- Limited to listed Ryobi models
- Requires checking the part number on your old guard first
Bottom line: Choose this if you own a listed Ryobi model and want a like-for-like swap.
View on Amazon4PCS 080016005704 Ryobi Blade Guard Assembly TSS102L TS1345L 10″ Miter Saw
Best for: Multi-saw shops and keeping spares on hand
This multi-pack uses the same part number as the single assembly above and is aimed at users who maintain several saws or want spares for a busy shop. The 10-inch listing covers the TSS102L and TS1345L models.
Key specs
- Pack of four assemblies
- Part number 080016005704
- Listed for 10-inch Ryobi miter saws
Pros
- Spares reduce downtime after damage
- Same part number as the single assembly
- Useful for shops with several matching saws
Cons
- Most buyers only need one, so the extra units may go unused
- Compatibility is still limited to listed models
Bottom line: A practical buy for shops with multiple listed Ryobi saws or anyone who wants spares.
View on AmazonBuying Guide
Compatibility with your saw model
Guards are not universal. Check the model number on your saw and compare it with the listing before ordering. Owners often report that a guard that looks similar can have different mounting points or arm geometry.
Good picks for this: Ryobi Parts Lower Blade Guard Assembly 080016005704, Miter Saw Blade Guard for Ryobi TSS121 series
Blade diameter
Match the guard to the blade diameter you run. A guard sized for 12-inch blades will not cover a 10-inch blade properly. Listings usually state the blade size, so confirm it before buying.
Good picks for this: Tamatori Saw Blade Guard 9814, Miter Saw Blade Guard for Ryobi TSS121 series
Coverage of the blade path
A good guard shields the teeth above and in front of the cutting line without blocking your view of the cut. Look for guards that fully enclose the upper blade and leave only the necessary opening at the workpiece. For a deeper look, 7 Best Arm Guards for Bike Options for Mountain Biking Protection covers this in detail.
Good picks for this: SawStop Dust Collection Blade Guard Assembly TSG-DC, Ryobi Parts Lower Blade Guard Assembly 080016005704
Dust collection
If you run a dust collector, a guard with a port can capture chips at the source and reduce airborne dust. Check that your hose diameter matches the port before buying.
Good picks for this: SawStop Dust Collection Blade Guard Assembly TSG-DC
Materials and durability
Look for impact-resistant plastic or metal construction. Owners often report that guards cracked by accidental bumps are the most common reason for replacement, so a sturdier body can pay off in shops with heavy use. A related read: Radial Arm Saw Guard Kit: How to Install and Use One Safely.
Good picks for this: Ryobi Parts Lower Blade Guard Assembly 080016005704, 4PCS 080016005704 Ryobi Blade Guard Assembly
Ease of installation
Plan on about an hour for a first install, including unplugging the saw, removing the old guard and checking that the new one clears the blade at full travel. Always disconnect power first.
Good picks for this: Miter Saw Blade Guard for Ryobi TSS121 series, Tamatori Saw Blade Guard 9814
Budget and spare parts
If you run several saws or expect to replace a guard, a multi-pack or a lower-cost option may make more sense than a single premium assembly. Weigh the cost of downtime against the cost of the part itself.
Good picks for this: 4PCS 080016005704 Ryobi Blade Guard Assembly, Tamatori Saw Blade Guard 9814
FAQ
Can I make my own blade guard for a radial arm saw?
Yes, many woodworkers fabricate a shield from clear polycarbonate or sheet metal. The guard must fully cover the upper blade, allow free arm movement and never obstruct the blade’s path. Test the full range of motion with the saw unplugged before cutting.
How do I know which guard fits my saw?
Start with the model number on the saw’s nameplate and the part number on your old guard. Compare both with the listing. If nothing matches, consult the manufacturer or a qualified tool repair professional.
Should a guard be removed for certain cuts?
Some operations, such as dadoing or certain bevel cuts, may require adjustment. Do not remove the guard for routine cuts. If a specific operation needs it off, follow the manufacturer’s instructions and use extra care.
How often should I inspect the guard?
Check it before each session for cracks, loose fasteners and clearance. Owners often report that a slight bend can cause the guard to rub the blade, which is a sign it needs adjustment or replacement.
Does a guard replace other safety practices?
No. A guard is one layer of protection. Use eye and hearing protection, keep hands clear of the blade path, and let the blade stop before removing offcuts. Consult a professional if you are unsure about setup or operation.
Can a dust port guard improve air quality?
It can capture a portion of chips at the blade, especially when connected to a working dust collector. It does not replace a dedicated shop ventilation system or a respirator where dust levels are high.
Conclusion
For a complete dust-controlled setup, the SawStop Dust Collection Blade Guard Assembly TSG-DC is the most purpose-built option, provided it matches your saw. Ryobi owners replacing a worn guard will find the Ryobi Parts Lower Blade Guard Assembly 080016005704 or the Miter Saw Blade Guard for Ryobi TSS121 series the most direct route. The Tamatori Saw Blade Guard 9814 suits budget replacements where blade size is confirmed, and the 4PCS 080016005704 pack makes sense for shops that want spares. Whichever you choose, confirm compatibility first and inspect the guard regularly.
For related reading, see Craftsman Radial Arm Saw Blade Guard Kit: How to Install and Use One Safely and 6 Best Radial Arm Saw Blade Guard Options for Safer Cuts (2026).
Sources
- Consumer product safety guidance on power tool hazards and guarding (cpsc.gov)
- Workplace standards for machine guarding and woodworking equipment (osha.gov)
- Standards and measurement resources relevant to tool fit and dimensions (nist.gov)
Related reading
- DIY Leather Arm Guard: 5 Best Picks for Making or Buying One (2026)
- Archery Arm Guard DIY: Make Your Own in 6 Steps (Beginner Guide)
- Women's Archery Arm Guard: How to Choose and Fit One Properly
- Welding Arm Guard Pattern: How to Cut and Sew One (Step by Step)
