We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Bodie Turner Arrow Rest: How It Works, Setup Steps and Tuning Tips

Learn how a Bodie Turner arrow rest works, how to install and tune it step by step, and avoid common setup mistakes for cleaner arrow flight.

Updated November 2026

A Bodie Turner arrow rest is a drop-in style rest that is typically set up to hold the arrow shaft with minimal contact and to let it release cleanly on the shot. In this guide you will learn how the bow-mounted components fit together, how to install and center the rest, how to set the basic tuning points, and how to troubleshoot the flight problems new archers run into most often. Work through the steps in order, make one change at a time, and verify each adjustment with paper and bare-shaft tuning before you shoot for score.

What a Bodie Turner Arrow Rest Does

An arrow rest supports the arrow between the riser and the string when the bow is at full draw and during the first fraction of the release. A good rest keeps the arrow at the same height every shot, lets it leave the bow without dragging or bouncing off the shelf, and does not add friction that changes the arrow’s path. The Bodie Turner name refers to a rest design that is usually considered a tuning-friendly option, which means its adjustments are easy to reach and easy to repeat. Keep in mind that exact adjustment points and mounting hardware vary by model and year, so always check the instructions packed with your specific rest and your bow manufacturer’s specs before you drill or tap anything.

Shopping for one? See our guide: Arrow Rest for Compound Bow: 6 Best Picks Compared (2026).

If you are still deciding between rest types, the overview at What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained explains how rests compare with other arrow-holding options. For a broader look at how drop-away and containment designs differ, Top 7 Archery Bow Arrow Rest Options Compared for Recurve and Compound Bows is a useful companion read.

Tools and Parts You Need Before You Start

Gather everything before you begin so you are not stopping halfway through an adjustment. Most setups need only basic hand tools, but a few items make tuning much faster and more accurate.

  • Hex (Allen) keys in the sizes listed in your rest’s manual
  • A bow square, to check nock point and rest position relative to the string
  • A paper tuning frame or a bare-shaft tuning setup
  • Painter’s tape or a sheet of paper for tuning
  • A torque-limiting screwdriver or a torque wrench, if your bow manufacturer lists torque values
  • A nock set and a bow stringer, if you need to adjust the string
  • Your arrow of choice, cut to your draw length and checked for straightness

Step-by-Step: Mounting the Bodie Turner Arrow Rest

Follow these steps in order. Rushing the mounting stage is the most common reason a rest ends up needing a complete redo.

  1. Confirm the mounting hole pattern. Check your bow’s riser for the rest mounting holes. Many risers use a standard pattern, but some require an adapter bracket. Do not drill new holes unless the manual tells you to and your bow is designed for it.
  2. Attach the rest to the riser loosely. Start the mounting screws by hand. Keep them snug but not tight so you can still slide the rest a few millimeters.
  3. Set the rest to a rough height. Position the arrow shelf so that the arrow sits roughly level with the plane of the bow. Use a bow square if you have one, or sight the shelf against the top of the riser.
  4. Center the rest left to right. Use a bow square or a simple string-to-rest measurement. Measure from the string center to the center of the rest’s arrow shelf. Adjust until the arrow will sit centered over the string.
  5. Tighten the mounting screws. Snug the screws evenly, alternating between them, and then torque them to the value in your manual. Overtightening can strip threads or distort the rest body.
  6. Check the cable and string clearance. Draw the bow slowly to confirm the string and cables move freely past the rest and do not contact the arrow shelf or the rest housing.

Setting Up Basic Tuning Points

Once the rest is mounted, you will set its basic adjustments. These are usually labeled for height, side-to-side position and, on some models, depth or cushion pressure. Work in small increments, typically a quarter to a half turn at a time, and retest after each change.

Set the Nock Point First

The nock point is the position on the string where the nock sits. Most archers set the nock point with a nock set so the arrow sits square to the rest at full draw. Usually the nock point should be perpendicular to the string when viewed from the side. If the arrow is off-square, the rest adjustments will not be able to correct the flight pattern.

Adjust Height

Set the arrow height so the arrow is level with the plane of the bow when viewed from behind, or per the manufacturer’s recommended starting point. Too high and the arrow may climb on release. Too low and it may dip. Recheck height after any change to the nock point or the string.

Adjust Side-to-Side Position

Side position is where tuning usually starts. Paper tuning, described below, is the most reliable way to dial it in.

Tuning With Paper

Paper tuning shows how the arrow leaves the bow by punching through a sheet of paper stretched across a frame. The tear pattern tells you whether the arrow is spinning, fishtailing or flying straight.

  1. Set up a paper frame about 3 feet from the bow, shooting straight through it at roughly chest height.
  2. Shoot one arrow at a time. Start at about 6 to 8 feet with the arrow aimed at the center of the frame.
  3. Study the tear. A clean hole with feathers or fletching marks in the center means the arrow is flying straight. A tear with the tail of the tear pointing in one direction indicates which way the rest or nock point needs to move.
  4. Make one small adjustment at a time and shoot another arrow.
  5. Repeat until the arrow tears cleanly through the paper with no tail.

Tuning With Bare Shaft

Bare-shaft tuning is a second method that checks the same thing from a different angle. Shoot one standard fletched arrow alongside one fletching-free shaft aimed at the same spot at about 10 to 15 yards. If the bare shaft lands in a different spot than the fletched arrow, the difference tells you the direction of the required rest or nock adjustment. Many archers use both methods to confirm the setup before shooting for score.

Common Mistakes

  • Skipping the bow square. Eyeballing alignment often leads to a rest that is off-center by enough to cause fishtailing.
  • Changing several settings at once. Adjust one variable at a time so you can tell which change made a difference.
  • Overtightening the mounting screws. This can crack or deform the rest body and throw off its position.
  • Forgetting to recheck after a string change. A new string can shift the nock point and the rest position relative to the arrow.
  • Using damaged arrows. A bent or out-of-spec shaft will tune poorly no matter how well the rest is adjusted.

Tips for Better Results

  • Keep your hardware in a labeled container so you can match screws and inserts to the correct location.
  • Mark your starting settings with a fine-tip marker or tape so you can return to them if a change makes things worse.
  • Retune after you change arrows, string material, or draw weight, since each affects arrow flight.
  • Check your rest periodically for loose screws, worn cushioning and any sign of wear on the arrow shelf.

A bow square is one of the most useful small tools for this setup because it lets you check rest and nock alignment quickly and repeatably. Look for a square designed for compound and recurve bows, with a rule long enough to span your riser. View on Amazon

A paper tuning frame speeds up the process of diagnosing arrow flight and keeps your paper in place for consistent shots. View on Amazon

A nock set helps you position the nock point consistently on the string, which is the foundation for rest adjustment. View on Amazon

FAQ

Do I need a bow press to install a Bodie Turner arrow rest?

Usually no. Mounting the rest and setting its basic height and side position can be done with the bow strung and braced in its normal state. A bow press is helpful if you need to adjust the string or cables, but check your bow manual before removing or loosening any cables.

How often should I retune my arrow rest?

Retune whenever you change arrows, string material, draw weight, or nock point, and after any significant impact or string replacement. Many archers also do a quick paper check at the start of each season.

What if my arrow fishtails after installation?

Fishtailing usually points to a rest position or nock point issue. Recheck the rest centering with a bow square, confirm the nock is square, and then repeat paper tuning in small steps.

Can I use a Bodie Turner rest on a recurve bow?

Many archers use rests of this general type on recurve bows, but mounting hardware and shelf size vary, so confirm compatibility with your bow’s riser and the manufacturer’s instructions before you buy or install.

Why does my arrow hit left or right of my sight pin after the rest is set?

Rest position and nock point both influence arrow flight and group placement. Make sure the rest is centered and the nock is square first, then adjust your sight. Shoot a group at a consistent distance to confirm the change.

Should I use paper tuning or bare shaft tuning?

Both are useful. Paper tuning gives a quick visual read on arrow flight at close range, and bare shaft tuning confirms the setup at a longer distance. Using both gives a more reliable result.

Is it safe to adjust the rest myself?

Basic adjustments are routine for most archers. If you are unsure about cable work, string changes, or drilling into your riser, consult a qualified archery technician or your bow shop before proceeding, since mistakes in these areas can affect safety and bow performance.

Conclusion

A Bodie Turner arrow rest works best when it is mounted square, centered and tuned in small, deliberate steps. Use a bow square, check the nock point, and confirm your setup with both paper and bare-shaft tuning before you trust it for scoring. Revisit the rest whenever your arrows, string or draw weight change, and keep a record of your settings so you can return to a known-good starting point.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.