QAD Arrow Rest Replacement Felt: Step-by-Step Guide for Clean Arrow Flight
Learn how to replace QAD arrow rest felt in a few clean steps, from choosing the right felt to tuning your rest for quiet, consistent arrow flight.
Updated November 2026
Replacing the felt on a QAD arrow rest is one of the simplest maintenance jobs you can do at the range, and it has a direct effect on how cleanly your arrow leaves the bow. Worn, compressed or fuzzy felt can drag on the shaft, cause inconsistent arrow flight and make paper tuning harder than it needs to be. This guide walks you through identifying worn felt, choosing a replacement, removing the old material, installing new felt and checking your work afterward.
Why Felt Wear Affects Arrow Flight
The felt on a QAD arrow rest is the contact surface that supports the arrow until the string pushes it forward. Its job is to hold the shaft steady without adding friction or noise. When felt flattens, picks up debris or develops a grooved path from repeated shots, the arrow can start to rub unevenly. That uneven contact can show up as fletching contact, inconsistent launch angle or a noisy release.
Felt wear is gradual, so many archers do not notice it until their groups open up. Checking felt is a routine step whenever you check your rest, nock point and cable positions. It is also worth checking after a long practice session, after you have shot in dusty or wet conditions, or after you change arrows to a different diameter or spine.
Signs Your Felt Needs Replacement
Look for these signs before deciding to swap the felt:
- Visible grooves or a dished center where the shaft has been riding.
- Flattened, matted or shiny spots that no longer spring back when pressed.
- Lint, grit or dried residue that won’t brush away.
- Arrows that land with a consistent tear or nick on one side of the shaft.
- Fletching that catches or brushes the felt as the arrow passes the rest.
- Paper-tuning results that change from session to session even when your form is steady.
If you see any of these, replace the felt rather than trying to clean it. Felt that has been compressed or grooved will not recover its shape, and cleaning rarely removes embedded debris completely.
Tools and Materials You Will Need
Gather these items before you start so you can finish the job in one sitting:
- Replacement felt sized and shaped for your QAD model (check the manufacturer’s listing or the packaging for the correct part).
- A small flat-blade screwdriver or hex key, depending on how your rest is mounted.
- A hobby knife or fine razor blade for trimming and clearing old adhesive.
- Isopropyl alcohol and a lint-free cloth for cleaning the felt channel.
- Tweezers for handling small pieces and removing debris.
- A piece of paper or a paper-tuning setup to check your results.
Step-by-Step: Replacing QAD Arrow Rest Felt
Step 1: Secure the Bow and Remove the Arrow
Unstring the bow or set it in a bow stand, then remove any arrow from the rest. Work with the bow on a clean, flat surface where small parts won’t roll away. Keep your hands clean and dry so no oil or dirt transfers to the new felt.
Step 2: Remove the Old Felt
Most QAD rests use felt pads or strips that are held in place with a small amount of adhesive or a retaining channel, depending on the model. Gently lift one edge with the tip of a hobby knife or tweezers. Peel slowly to avoid tearing the rest housing. If the felt is stuck, warm it lightly with a hair dryer on low heat to soften the adhesive, but keep heat away from plastic parts.
Step 3: Clean the Channel Thoroughly
Once the old felt is off, remove leftover adhesive, lint and grit. Use a hobby knife to lift any stubborn residue carefully, then wipe the surface with isopropyl alcohol on a lint-free cloth. Let it dry completely before installing the new felt. Residual alcohol can weaken adhesive, and any leftover debris will sit under the new felt and cause uneven contact.
Step 4: Check the Contact Surface
Inspect the rest housing for cracks, burrs or deformed edges. A rough or chipped edge will wear new felt quickly and can scratch arrows. If you find damage beyond the felt itself, you may need a replacement part rather than felt alone. Consult the manufacturer or a qualified bow technician if you are unsure.
Step 5: Install the New Felt
Line up the new felt with the channel or mounting area. Press it down evenly starting from one end so you don’t trap air bubbles. If the felt uses adhesive backing, press firmly for a few seconds and avoid repositioning once it has contacted the surface, since adhesive grabs quickly. Trim any excess only after the adhesive has set, using a sharp blade and a steady hand.
Step 6: Allow Adhesive to Cure
If your felt uses a separate adhesive, follow the cure time listed by the adhesive manufacturer. Most common adhesives need several hours to reach full strength. Shooting too early can cause the felt to shift or peel. Plan for a rest period rather than rushing back to the target.
Step 7: Reinstall and Check Setup
Reattach the rest to the bow if you removed it, and check that all screws are snug without being overtightened. Confirm the arrow centers on the felt and that the shaft passes without touching the housing. Recheck your nock point and cable alignment if you disturbed them during the job.
Step 8: Verify with a Paper Test
Shoot a few arrows through paper to confirm the new felt is performing well. Look at the tear pattern. A clean tear with the arrow centered suggests the rest is set correctly. If the tear is off-center or the arrow seems to hesitate, recheck felt alignment and whether the felt sits flush with the shelf.
Choosing the Right Felt
Felt is not one-size-fits-all. Consider these factors when choosing a replacement:
| Factor | What to Look For | Why It Matters |
|---|---|---|
| Fit | Matches your QAD model’s channel or pad size | Prevents gaps and uneven contact |
| Density | Firm enough to hold shape, soft enough to protect shafts | Balances support with minimal friction |
| Backing | Adhesive-backed or designed for a specific mount | Keeps felt stable during shooting |
| Material | Felt rated for archery use | Resists compression and moisture |
Owners often report that matching the replacement to the original part’s thickness makes the transition smoother, since changing thickness can shift nock height and shelf contact. Check the manufacturer’s specifications for the exact part number for your model.
Common Mistakes to Avoid
- Installing felt over leftover adhesive or lint, which causes bumps and uneven contact.
- Pressing the felt on before the channel is fully dry after cleaning.
- Overtightening rest screws, which can crack the housing or warp the felt surface.
- Skipping the paper test and assuming the rest is set correctly.
- Using heat near plastic components, which can deform the housing.
- Replacing felt without checking the rest housing for wear or damage.
Tips for Longer-Lasting Felt
- Wipe the felt with a dry cloth after shooting, especially in dusty or wet weather.
- Store your bow with the rest protected from dirt and direct sun.
- Check felt condition every few weeks during heavy practice.
- Keep a spare set of felt on hand so you can swap it at the range without delay.
- Keep arrows clean. Grit on the shaft is one of the fastest ways to wear felt down.
If you are working on a different rest or want to compare setup options, you may find Arrow Rest Felt Replacement: Step-by-Step Guide for Clean Arrow Flight a useful companion. For general setup context, QAD HDX Arrow Rest: Setup, Tuning and Tips for Better Arrow Flight covers how rest position affects flight. Archers choosing a new rest entirely may also want to read 5 Best Drop Away Arrow Rest QAD Models for Target and Hunting (2026). If your rest uses moleskin rather than felt, Moleskin for Arrow Rest: How to Apply It Right (Step-by-Step) explains that process. Finally, What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained gives useful background on how rests fit into the broader arrow-holding system.
Recommended gear
- Isopropyl alcohol and lint-free cloths: Clean residue from the rest channel so new felt sits flat and bonds properly. View on Amazon
- Hobby knife with replacement blades: Lifts old felt and trims new material cleanly without tearing the housing. View on Amazon
- Small precision screwdriver set: Lets you remove and reinstall rest screws without stripping heads or overtightening. View on Amazon
- Hair dryer for adhesive softening: Warms stubborn adhesive gently so old felt peels off without damaging the rest. View on Amazon
FAQ
How often should I replace QAD arrow rest felt?
There is no fixed schedule. Check the felt regularly during heavy practice and replace it when you see grooves, flattening or debris that won’t clean away. Archers who shoot daily often replace felt more frequently than those who shoot occasionally.
Can I clean felt instead of replacing it?
Light cleaning with a dry cloth can remove surface dust. However, once felt is compressed or grooved, cleaning will not restore its shape. Replace it in those cases.
Do I need to retune my bow after changing the felt?
Usually a quick check is enough. If the new felt is the same thickness and sits flush, your setup should be close. Run a paper test to confirm arrow flight and adjust if the tear is off-center.
Is it better to use adhesive felt or a mechanical mount?
This depends on your QAD model. Some rests use adhesive-backed felt, while others rely on a mounting channel. Follow the instructions for your specific rest and use the replacement part the manufacturer recommends.
What causes felt to wear out quickly?
Grit on arrow shafts, moisture, dust and repeated contact from the same shaft position are the most common causes. Keeping arrows clean and wiping felt after shooting extends its life.
Can I use a different brand of felt on my QAD rest?
Possibly, but fit and thickness must match closely. Mismatched felt can change nock height or shelf contact. Check compatibility with the rest manufacturer before switching brands.
What if my arrows still tear unevenly after replacing the felt?
Recheck the rest’s position, nock point, cable alignment and arrow spine. Felt is only one part of the setup, so an uneven tear often points to a different adjustment. If you are unsure, a qualified bow technician can help with a full tune.
Is replacing felt safe to do at home?
Yes, for most archers, as long as you work carefully and keep your bow unstrung during the process. If you notice cracks, loose screws that won’t hold or damage to the rest housing, stop and have a professional inspect the bow before shooting.
Conclusion
Replacing QAD arrow rest felt is a manageable job that keeps your arrows flying cleanly and your groups consistent. Work through the steps in order: remove the old felt, clean the channel, install the new material, allow it to cure and verify with a paper test. Keep a spare set of felt on hand and check it regularly, and your setup will stay reliable through the season.
Ready to choose one?
