How to Setup Bow Sight: A Step-by-Step Guide for Beginners
Learn how to setup bow sight on your compound or recurve bow. Follow these steps for mounting, leveling, pin alignment and first sight-in for accurate shots.
Updated November 2026
Learning how to setup bow sight correctly means mounting it square to your bow, leveling it, setting your pins to yardage and making a first sight-in at a safe, known distance. Done in that order, a sight gives you a repeatable aim point that you can refine with a few arrows. This guide covers the steps for a standard pin-style sight on a compound or recurve bow.
Gather What You Need Before You Start
Having the right tools on hand keeps the process short and reduces guesswork. Most setups need only a few basic items.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
- A hex or Allen key set matching your sight and mounting hardware
- A bubble level, either a small mounting level or a bow-mounted level
- A tape measure or range markers at 10, 20 and 30 yards
- Your sight manual, which lists torque values and pin spacing
- A target with a clear aiming spot and a backstop you trust
Mount the Sight Securely and Square
Attach the sight bracket to the bow’s riser using the mounting holes or the Picatinny rail, depending on your bow. Snug the bolts by hand first, then tighten them in small increments to the torque your manual specifies. Overtightening can strip threads or distort the bracket, while loose bolts let the sight drift during shooting.
Check that the sight sits in line with the arrow’s flight path. If your bow has a rail, slide the sight so the pin guard is roughly centered over the arrow when you draw. Leave the fine adjustments for later. How to Use Phone as Bike Computer: Setup Steps and Safety Tips goes further into this.
Level the Sight and Set Your Pins
A level sight keeps your vertical pin pattern true, so a pin that looks correct at 20 yards will still be correct at 30. Place a bubble level on the sight housing or on the bow, then adjust the sight’s leveling screws until the bubble centers. Lock the adjustment in place once it is level.
Next, set each pin to a distance. Most beginners start with pins for 20, 30 and 40 yards, though your draw length and arrow speed may suggest a different spread. Loosen the pin housing screws, slide each pin up or down to the mark you want, and retighten. Keep the sight’s pin spacing as the manufacturer specifies so the pins stay in the expected order.
Make Your First Sight-In
Start at a short distance, such as 10 yards, and shoot three arrows from a steady stance with the same anchor point each time. Group them, then adjust the sight so the group centers on your aim spot. Move the sight windage adjustments for left and right movement and the elevation adjustments for high and low impacts. Make one adjustment at a time and shoot another group after each change.
Once the 10-yard group is centered, move back to your next pin distance and repeat the process. Confirm the pins line up with your actual impact points at each yardage, then record the settings in a notebook or on a tape. Always check your local range rules and confirm your backstop before shooting.
Common Mistakes
- Tightening mounting bolts beyond the torque in the manual, which can damage threads
- Skipping the level check, which causes pins to be off at longer distances
- Changing several settings at once and losing track of what worked
- Sighting in at unknown distances instead of measured yardages
- Shooting with an inconsistent anchor point, which makes adjustments look wrong
Recommended Gear
A quality bubble level designed for bow mounting makes the leveling step faster and more reliable. View on Amazon
A set of hex keys with the correct sizes for your sight reduces the chance of stripping screw heads during adjustments. View on Amazon
FAQ
How often should I re-check my bow sight setup?
Check mounting bolts and pin settings every few weeks, and again after any major bow adjustment or change in draw weight. Re-sight after moving to a new shooting environment or changing arrows.
Do I need to set pins at specific distances?
Not necessarily. Choose distances you actually shoot at, such as 20, 30 and 40 yards for hunting or target practice, then sight each pin at its marked distance.
What if my groups keep drifting after setup?
Inconsistent form is the most common cause, so focus on a repeatable anchor and release first. If problems continue, check that the sight bolts are secure and that the bracket has not shifted. For persistent issues, a coach or experienced archer can help you diagnose form problems.
Conclusion
Setting up a bow sight comes down to mounting it securely, leveling it, setting pins to known distances and sighting in one yardage at a time. Work from short to long distances and make one change at a time so each adjustment is easy to trace. With a careful setup and steady form, your pins will give you a reliable aim point for shooting.
Related reading
- Xero A1i Pro Bow Sight: Setup, Pin Tuning and Tips for New Archers
- What Is a Sight Master Bow Sight and How Do You Set One Up?
- What Is a Dead Ringer Bow Sight and How Do You Use One?
Ready to choose one?
