What Is a Hoyt 5 Pin Bow Sight and How Do You Set It Up?
Learn what a hoyt 5 pin bow sight is, how its five pins differ from single-pin sights, and the basic steps to set up and sight in yours.
Updated November 2026
A hoyt 5 pin bow sight is a fixed-pin sight with five aiming pins, each set for a different yardage. You aim by placing the pin that matches your target distance on the spot you want to hit. Setup means mounting the sight securely, leveling it, and sighting in each pin at its distance so the pins line up with where your arrows actually land.
Why Five Pins Work Differently Than a Single Pin
A single-pin sight uses one pin that you move up or down for each distance. A five-pin sight keeps all of its pins fixed, so you simply pick the one labeled for the distance you are shooting. Many archers find this faster in the field because there is nothing to adjust between shots. The trade-off is that you are limited to the distances the pins are set for, so you will need to estimate range between marks.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
Five pins are commonly set for distances such as 20, 30, 40, 50 and 60 yards, though the exact spacing depends on how you sight them in. Check the manufacturer’s instructions for the pin set on your model before you start.
What Affects Your Sight-In Results
Several factors change where your arrows land, and each one can make a pin look wrong even when the sight is fine:
- Draw length and draw weight: A change in either shifts arrow flight, so pin settings should be made at the draw you actually shoot.
- Arrow spine and point weight: Different arrows fly differently. Sight in with the arrows you plan to use.
- Bow tuning: A poorly tuned bow can throw groups off no matter how well the sight is set. Make sure your nock point and cam timing are right before adjusting pins.
- Anchor point consistency: If your anchor moves, your groups will move with it.
How to Set Up and Sight In Your Five Pins
- Mount the sight so it is secure and the pin guard sits correctly. Confirm the sight is level and that the pins are aligned with the bow’s vertical axis.
- Measure your distances accurately with a rangefinder or marked range. Mark each distance clearly.
- Start with the 20-yard pin. Shoot a group of three to five arrows from a steady stance and note where they land.
- Adjust that pin’s position until your group centers on your aim point. Tighten the pin securely and recheck.
- Repeat for each remaining pin at its distance, working outward from shortest to longest.
- Shoot a verification group at each distance once all pins are set, and fine-tune if needed.
Tips that help: shoot from the same spot each time, let your arrows settle between groups to reduce fatigue, and recheck pins after a few sessions, since settings can drift with use. If you are unsure about mounting or tuning the bow itself, consult a qualified archery pro shop before making major changes.
FAQ
Can I use a hoyt 5 pin bow sight for hunting?
Many archers use multi-pin sights for hunting, but check your local hunting regulations and practice at the distances you expect to shoot in the field before you rely on any sight during a hunt.
How often should I recheck my pins?
Recheck after any change in your bow, arrows, draw length or anchor, and periodically during regular practice, since small shifts can add up over time.
What if my pin doesn’t match a distance I need?
Use the nearest pin and aim slightly high or low to compensate, or practice estimating the gap between marks so you can make a confident hold.
Related reading
- Xero A1i Pro Bow Sight: Setup, Pin Tuning and Tips for New Archers
- What Is the CBE Tactic Hybrid 1-Pin Bow Sight and Is It Right for You?
- Triple Stack Bow Sight: How to Set Up and Sight In a Three-Pin Sight
Ready to choose one?
