We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

What Is a Horizontal Single Pin Bow Sight and How Do You Set One Up?

Learn what a horizontal single pin bow sight is, how its single pin moves across the target, and how to set one up and sight it in correctly.

Updated November 2026

A horizontal single pin bow sight is a sight with one aiming pin that slides side to side (horizontal) rather than up and down, so you adjust windage instead of elevation. It is mainly used to correct for left or right arrow impact, while distance is handled by a separate method such as a yardage tape, a rangefinder reading, or a different pin on a multi-pin sight. Most owners set it up by sighting at a fixed distance and then adjusting the pin position until the arrows group where the pin rests.

Why a Horizontal Pin Behaves Differently

Most single pin sights move the pin vertically, which changes the aim point for distance. A horizontal sight flips that logic. Because the pin tracks left and right, it corrects for sideways drift caused by bow tuning, nock point, cant, or a hand that torques the bow slightly. If your arrows consistently hit a few inches right of center at 20 yards, the fix is in the horizontal adjustment, not in how high you hold the pin.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

This also means a horizontal sight does not replace distance judgment on its own. You still need a reliable way to know how far away the target is, which is why many archers pair a horizontal pin with a yardage guide or a separate range method.

Factors That Affect Your Setup

Before you touch the adjustment, check the things that can throw off windage:

  • Nock point and arrow rest: A rest set too far in or out pushes arrows sideways. Verify the nock point is level and centered first.
  • Bow cant: Tilting the bow even slightly moves the arrow path. Hold the bow as vertical as your form allows, and keep it the same every shot.
  • Anchor and release consistency: If your anchor moves, the arrow moves with it. Groups that scatter widely point to form, not sight position.
  • Mounting: A sight that is loose or not square to the arrow can shift its reference. Tighten all mounting hardware and confirm the sight sits level.

Fix the bow and form first. A horizontal adjustment cannot compensate for a bow that is not tuned, and chasing a moving group with the sight only wastes arrows.

Setting Up and Sighting In

  1. Mount the sight securely and confirm the bow is level in your hand.
  2. Shoot a group of three to four arrows at a fixed distance, such as 20 yards, using the same anchor each time.
  3. Measure the group’s center relative to the bullseye. Note how far left or right it sits.
  4. Adjust the horizontal pin position in small increments to move the pin toward the group’s center.
  5. Shoot another group and repeat until the group centers on the aim point.
  6. Mark the final position with a paint pen on the sight housing so you can return to it quickly.

Manufacturers typically specify the adjustment direction and travel range in the instructions, so check your model’s manual before making large changes. Confirm the exact adjustment method for your sight in the official documentation.

Practical Tips for New Archers

  • Sight in at one distance first, then test at others to confirm the pin behaves as expected.
  • Use the same release, anchor, and stance during sighting as you will in actual shooting.
  • Keep a log of pin settings and group results so you can troubleshoot later.
  • Recheck the sight after any change in bow tune, string, or draw length.

For a broader look at how single pin sights are adjusted, see Single Pin Bow Sight Tape: How to Set Up and Use One Correctly and Adjusting Bow Sight Pins: A Step-by-Step Guide for Beginners. If you are weighing single against multi-pin designs, Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners? covers the trade-offs.

FAQ

Does a horizontal single pin bow sight replace a yardage pin?

No. It corrects left and right impact only. You still need a distance method, such as a yardage tape or rangefinder, to handle how far away the target is.

Why do my arrows still drift after sighting in?

Inconsistent form, cant, or an untuned bow is the usual cause. Check your anchor, release, and bow level before adjusting the pin again.

How often should I recheck the horizontal pin?

Recheck after any change in bow setup, arrows, or string, and periodically during the season. If you are unsure about a repair or adjustment, consult a qualified archery pro shop.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.