CBE 5 Pin Bow Sight: What It Is and How to Set It Up
Learn what a cbe 5 pin bow sight is, how its five pins are set for different distances, and the basic steps to sight it in accurately as a beginner.
Updated November 2026
A cbe 5 pin bow sight is a fixed-pin sight with five aiming pins, each set to a different yardage, so you can hold on a target at several distances without moving the sight. Each pin is adjusted to hit a set spot at its marked distance, and you pick the pin that matches how far away your target is. Setting up the sight correctly matters more than the number of pins.
Why a Five-Pin Sight Works for Some Archers
With a single-pin sight, you adjust the pin up or down for each distance, which takes time at the range and in the field. A five-pin layout trades that adjustment for a fixed aiming reference. You learn where each pin lands and simply choose the matching one. Many archers find this easier to repeat under pressure because the sight stays put once it is tuned.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
The trade-off is complexity. Five pins mean five points of alignment that all need to be sighted in carefully. Small errors in one pin will throw off every shot at that distance, so patience during setup pays off.
What Affects Your Pin Accuracy
Several factors determine whether a pin lands where it should:
- Bow tuning: If your arrow flies out of line, no pin setting will group well. Confirm your bow is tuned before touching the sight.
- Consistent anchor and release: Changes in draw length or anchor point shift the impact point.
- Arrow spine and weight: Different arrows fly differently, so pins set with one arrow may not match another.
- Sight mounting: A loose or crooked sight will drift. Check that the mounting bracket is snug and level with the riser.
- Distance accuracy: Pins are set at marked yardages. Measure your range with a rangefinder or a tape rather than guessing.
How to Sight In a Five-Pin Sight
Work from the closest pin to the farthest, and shoot at a target placed at the exact distance each pin is marked for. Shoot three to five arrows per pin and adjust only after you see a consistent group.
- Confirm the bow is tuned and the arrows are cut to the correct length.
- Mount the sight level and tighten all fasteners firmly.
- Set the first pin at your nearest marked distance and shoot a group.
- Move the pin in small increments toward the center of the group, then shoot again.
- Repeat for each remaining pin at its distance, checking that the sight stays fixed between shots.
- Shoot a final round at a few distances to confirm every pin groups where expected.
If you are new to pin sights in general, the guide to Bow Sight Pin Adjustment: A Step-by-Step Guide for Beginners covers the adjustment mechanics in more detail. For a broader comparison of pin counts, see Single Pin or Multi Pin Bow Sight (2026): Which Is Better for Beginners?
What We’d Use
A sturdy field-ready target for sighting in is worth having alongside the sight. You can find options by searching for a foam target block to stop arrows safely at your set distances. View on Amazon
A laser rangefinder makes distance marks far more trustworthy than paced estimates. View on Amazon
FAQ
Is a five-pin sight good for beginners?
It can be, but many beginners start with fewer pins until their form is consistent. A single or three-pin setup is often easier to tune first.
How often should I re-sight my pins?
Check them whenever you change arrows, adjust your draw length, or notice groups drifting. Routine checks at the start of each shooting session are a good habit.
Do I need a professional to set up the sight?
Most archers can sight in a pin sight themselves with careful measuring. If your groups remain inconsistent after tuning the bow, ask an experienced archery shop or coach to take a look.
Related reading
- What Is the CBE Tactic Hybrid 1-Pin Bow Sight and Is It Right for You?
- Xero A1i Pro Bow Sight: Setup, Pin Tuning and Tips for New Archers
Ready to choose one?
