We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Use a 3 Pin Bow Sight: A Step-by-Step Guide for Beginners

Learn how to use a 3 pin bow sight, from mounting and anchor point to sighting in pins at 20, 30 and 40 yards. A clear beginner walkthrough.

Updated November 2026

Learning how to use a 3 pin bow sight comes down to three things: mount it square, set a consistent anchor point, and sight in each pin at a set distance. Once you finish this process, each pin will be tied to a known yardage, and you can aim quickly without guessing. Expect the first session to take an hour or more, mostly for adjusting and shooting groups.

Before You Start: Mount and Level the Sight

A sight only works if it sits in the same place every time. Attach the sight bracket to the riser using the bolts that came with it, and tighten them snugly without cranking down hard enough to strip the threads. Check that the sight housing is level with the ground when the bow is held upright. A tilted sight will shift your point of impact at longer distances.

Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

How to Sight In a 3 Pin Bow Sight

Most three-pin sights are set up for 20, 30 and 40 yards, though some owners prefer 20, 30 and 50. Work from the closest distance outward so each adjustment builds on the last.

Step 1: Set Your Anchor Point

Choose an anchor point, such as the corner of your mouth or your jawbone, and use it on every shot. Draw to the same spot each time and make sure your string peep or kisser button lines up consistently with your eye.

Step 2: Sight In the First Pin

Shoot at a target 20 yards away. Start with the top pin, aiming at the center of the target and making a few arrows at full draw. Shoot a group of three to five arrows. If the group is high, move the pin down. If it is low, move the pin up. Adjust the pin in small increments and shoot again after each change until the arrows land where you aim.

Step 3: Add the Remaining Pins

Move back to 30 yards and sight in the middle pin using the same method. Then move to 40 yards for the bottom pin. Each pin should group tightly around your aim point at its distance. Do not skip ahead to a far pin before the near one is solid, because you will chase errors.

Step 4: Confirm With a Final Check

Shoot a few arrows at each distance without adjusting anything. Confirm that the groups hold together. If they drift, check your anchor point and release before changing the sight again.

Checklist for Setup Day

  1. Target butt or stand with a clear aiming mark
  2. Bow square and tightly seated sight bracket
  3. Allen wrench or adjustment tool matching the sight
  4. Consistent anchor point and release
  5. Measuring tape or range markers at 20, 30 and 40 yards
  6. Notebook to record the pin settings for each distance

Common Mistakes

  • Adjusting the pins while your form changes from shot to shot.
  • Sighting in at uneven distances, such as 18 or 33 yards, and then labeling the pin as 20 or 30.
  • Moving the sight housing in several directions at once instead of making one change at a time.
  • Shooting from a loose or unstable stance, which makes every group look like a sight problem.
  • Ignoring a loose bracket. Retighten the mounting bolts after the first few sessions.

For related setup steps, see Single Pin Bow Sight Tape: How to Set Up and Use One Correctly and Triple Stack Bow Sight: How to Set Up and Sight In a Three-Pin Sight. If you want to compare other sight styles, What Is a Dead Ringer Bow Sight and How Do You Use One? covers a different approach.

  • A bow square helps you check that the sight housing and pins line up before you start adjusting. View on Amazon
  • A sturdy target with a clear aiming mark makes it easier to see where each arrow lands at every distance. View on Amazon
  • A pin-level or sight level helps confirm the sight is vertical before you begin sighting in. View on Amazon

FAQ

How often should I re-sight a 3 pin bow sight?

Check your sight whenever you change arrows, string, draw weight or anchor point, and at the start of each season. Small changes in form can shift your groups noticeably at longer distances.

Can I use the same settings for every arrow?

Only if the arrows match in weight, length and spine. Changing arrow components usually requires re-sighting, so note your settings for each arrow setup.

Should I consult a professional for mounting?

If you are unsure about tightening the bracket or the bow’s limits, ask a qualified archery shop or certified technician to check the setup.

Conclusion

Mount the sight square, set a consistent anchor, and sight in each pin at 20, 30 and 40 yards, working from nearest to farthest. Record your settings and recheck them periodically. With steady form and small, deliberate adjustments, the three pins will become a reliable aiming system.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.